I think I've just invented the future of pistol cartridges with the 50 K-TAP
Maximum firepower behind maximum projectile size. Fits perfectly within a pistol grip with a single stack mag. It's bad diameter is equivalent to a double stack 9mm width. A double stack 50k-tap mag would be about 1.5 inches wide making it reasonable for a pcc. Full sized handgun could hold 5+1 in a flushfit. I think extended mags and open carry should be the norm though because drawing from a side holster is faster. Only people who are serious about self defense would be interested in this round anyway, it isn't for the casual crotch carry dandies. 300gr bullets should see upwards of 2000fps. This is the future, I just need to design a handgun around it
>Full sized handgun could hold 5+1
What in the revolver fuddlore is this OP?
You DO edc extended mags, don't you anon? Even if you don't believe in high capacity, you must believe in max efficiency
Why not just get a deagle brand Deagle and put some buffalo bore or bubba's pissin' hot handloads in it instead? Failing that why not just get a S&W .500 Magnum if you absolutely have to have something that will drop a charging grizzly with one shot?
This has a greater case volume than 50ae, also >revolver
It's for open carry. Shouldn't be more than 1" thick for the slide. Thinking about making the recoil spring and rails for the slide on top of the barrel, then having a semi steel frame the barrel mounts to.
Your handgun slide is going to need to be significantly wider than a desert eagle to handle any real pressure without kaboom.
It's going to be a 2" thick.
Even a pcc would need to be enormously wide.
>Only people who are serious about self defense would be interested in this round anyway
self defense against what? motorized carts?
>Attacker is smaller than you, can easily confront physically
>Attacker is same size as you, can use handgun or confront physically
>Attacker is larger than you, can use handgun
>Multiple attackers, with a smaller gun you could be double tapping or triple tapping each, greatly increasing the time require to disable all targets. Or you could K-tap them for an immediate drop
I can't think of a scenario where you would want a smaller cartridge
>I can't think of a scenario where you would want a smaller cartridge
Because you're a retarded larper who doesn't shoot. Handguns shoot too low velocity to get any effects beyond punching holes. Once you get above the minimum needed penetration, speed and accuracy matter the most. And smaller lighter cartridges are easier to shoot fast accurately. Dealing lethal damage to an animal at <10yd isn't an enormously trying task. If you can put a 5 group into a 3-4 moa in a few seconds then it doesn't matter if they're .5" or .35" it'll do the job. If you can barely get off a shot that hits them in the arm it might as well be a 1" bullet it still won't do them in (at least not quickly).
What does K-tap stand for
Kel-tec auto pistol
This is the gun you need to make OP
why are there no more handguns with magazine in front of the grip?
Because it adds length and weight to the weapon without increasing barrel length, which is critical for you to derive velocity and power.
If your goal is to bring bore axis down as much as possible then you can find some benefit but for every other metric it's detrimental.
I'd give up extra length to have an auto loader 357 mag with a forward magazine. Give me that long boi
almost all target shooter do that
>300gr bullets should see upwards of 2000fps
my bro what sort of barrel length do you think you need for that
A full sized barrel length of 6 inches
Don't worry, he hasn't done any math.
>calculating the muzzle velocity instead of making a guess
ngmi. We aren't even at the point in the process yet
Its less than 500 bushwhacker, but I'm lazy af and not doing the case capacity calculations. It COULD work, but you not have a gun the size of a 1911 with the recoil energy of an African stopping rifle.
You don't even have an African stopping rifle.
Which is one of the differences between you and me.
Cool. Go cut of the stock, chop the barrel and try to fire it one handed. Tell me how it goes.
I'm not fat, which is one of the differences between you and me
>brown
>obese
>of shit taste
three things you are that I'm not
fatass
also can you reload the ammo, never seen anyone does that for some reason ?
>mentions bushwhacker as defense for argument about handgun cartridge
Stop. You have the desire but you need more information. I'm sorry the internet is so shit but you're going to have to do a lot more homework before you get to this point. It's even possible there's something usable in your idea, but this is macaroni art and you're posting on PrepHole.
Dis u?
>300gr bullets should see upwards of 2000fps.
Nothing like exceeding blackpowder .45-70 rifle loads in a carry pistol. I’m sure that wouldn’t be cumbersome
It isn't like he'd ever dare leave his mom's basement armed with anything less.
>heavy barrel to handle the pressure
>compensator
>handling the gun like a man
Don't forget, these velocities are from a 24 in barrel. Seems closer to the smokeless powder variants too.
8mm nambu reinvented
Here ya go, noguns
>Only people who are serious about self defense would be interested in this round anyway, it isn't for the casual crotch carry dandies. 300gr bullets should see upwards of 2000fps. This is the future, I just need to design a handgun around it
lmao imagine being such a limp wrist pussy gay u think ur gay little pipsqueak round is worth anything vs a REAL MAN'S sidearm! 600ne is the basic self defense round and already invented. guess yours is good for putting in ur purse in the ladies powder room LOL
How effective is this for concealed carry?
No need to conceal
why would you want to conceal your fashion statement?
>making me do math at 10am on a weekend
I'm away from my work PC so it's hand drawn and basic
>increasing the diameter of a 50ae cartridge by 50% then shortening it to .575 case length gives you 0.25 cubic inches of volume for powder
>50ae cartridge has a case volume of 0.19 cubic inches
The math in the pic is right but I changed the overall length of it by 0.1 for the powder increase
Should be 2000fps easy
that's some stoppin' power right there sonny, shame it ain't a .46
How about .50 ae necked down to .30?
ate
OK noguns/recoilet.
one
Please refer to above for a complete refutation of your existence.
>brown
>obese
>of shit taste
>coping
>seething
please add a couple more items to my list of differences
What kind of retarded pressure would your brick/handgun be operating at?
He doesn't know, he's too stupid to do math.
50kpsi. I don't know why anons keep on doubting me
50k psi with a .72 inch bolt face would yield bolt thrust pressure approaching magnum rifle territory you dolt.
Even 50AE maxes out at 36k.
You will never make this work in a handgun unless it is 2.5" wide and weighs ten pounds.
You are making no sense anon. Islts almost like you are a Russian trying to derail American ingenuity
oh
>noguns
>recoilet
>blind
>retarded
>herbed
>no(you)
Oh yeah, we've got a 4chantard itt.
I have the perfect gun for this round. Hurry up and get it made.
I’m so annoyed by the imperial units
And that's why you aren't the undisputed world war champ, bucko.
three
Let's add ESL to the list of traits OP has displayed.
Of course I can reload it, you retard, that's half the fun.
>300gr bullets should see upwards of 2000fps
>Only people who are serious about self defense would be interested in this round anyway
Self defense against what? If it's humans then this velocity is too low even with the larger bullet diameter. You need to acquire an understanding of wound profiles and what kind of bullet and velocity works best against human flesh.
Pic related is a good demonstration. You can see that 5.56 is absolutely superior against a human sized target when compared to 7.62x39. However, that same 7.62x39 which mostly just pokes neat holes in humans would fare much better against a Grizzly Bear than 5.56 would.
If you don't understand why 5.56 is more devastating against a human than 7.62x39 but 7.62x39 is more devastating against a bear you need to think about this example so you can understand why your new boutique round would be a poor choice against humans. It's just going to zip through them leaving a .50" diameter wound.
A cz52 style firing mechanism scaled up might be able to handle your round. It uses a short recoil, roller locked mechanism. The same as an mg42.