I think I've just invented the future of pistol cartridges with the 50 K-TAP

I think I've just invented the future of pistol cartridges with the 50 K-TAP
Maximum firepower behind maximum projectile size. Fits perfectly within a pistol grip with a single stack mag. It's bad diameter is equivalent to a double stack 9mm width. A double stack 50k-tap mag would be about 1.5 inches wide making it reasonable for a pcc. Full sized handgun could hold 5+1 in a flushfit. I think extended mags and open carry should be the norm though because drawing from a side holster is faster. Only people who are serious about self defense would be interested in this round anyway, it isn't for the casual crotch carry dandies. 300gr bullets should see upwards of 2000fps. This is the future, I just need to design a handgun around it

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 1 year ago
    Anonymous

    >Full sized handgun could hold 5+1
    What in the revolver fuddlore is this OP?

    • 1 year ago
      Anonymous

      You DO edc extended mags, don't you anon? Even if you don't believe in high capacity, you must believe in max efficiency

  2. 1 year ago
    Anonymous

    Why not just get a deagle brand Deagle and put some buffalo bore or bubba's pissin' hot handloads in it instead? Failing that why not just get a S&W .500 Magnum if you absolutely have to have something that will drop a charging grizzly with one shot?

    • 1 year ago
      Anonymous

      This has a greater case volume than 50ae, also >revolver

      Your handgun slide is going to need to be significantly wider than a desert eagle to handle any real pressure without kaboom.
      It's going to be a 2" thick.
      Even a pcc would need to be enormously wide.

      It's for open carry. Shouldn't be more than 1" thick for the slide. Thinking about making the recoil spring and rails for the slide on top of the barrel, then having a semi steel frame the barrel mounts to.

  3. 1 year ago
    Anonymous

    Your handgun slide is going to need to be significantly wider than a desert eagle to handle any real pressure without kaboom.
    It's going to be a 2" thick.
    Even a pcc would need to be enormously wide.

  4. 1 year ago
    Anonymous

    >Only people who are serious about self defense would be interested in this round anyway
    self defense against what? motorized carts?

    • 1 year ago
      Anonymous

      >Attacker is smaller than you, can easily confront physically
      >Attacker is same size as you, can use handgun or confront physically
      >Attacker is larger than you, can use handgun
      >Multiple attackers, with a smaller gun you could be double tapping or triple tapping each, greatly increasing the time require to disable all targets. Or you could K-tap them for an immediate drop
      I can't think of a scenario where you would want a smaller cartridge

      • 1 year ago
        Anonymous

        >I can't think of a scenario where you would want a smaller cartridge
        Because you're a moronic larper who doesn't shoot. Handguns shoot too low velocity to get any effects beyond punching holes. Once you get above the minimum needed penetration, speed and accuracy matter the most. And smaller lighter cartridges are easier to shoot fast accurately. Dealing lethal damage to an animal at <10yd isn't an enormously trying task. If you can put a 5 group into a 3-4 moa in a few seconds then it doesn't matter if they're .5" or .35" it'll do the job. If you can barely get off a shot that hits them in the arm it might as well be a 1" bullet it still won't do them in (at least not quickly).

  5. 1 year ago
    Anonymous

    What does K-tap stand for

    • 1 year ago
      Anonymous

      Kel-tec auto pistol

  6. 1 year ago
    Anonymous

    This is the gun you need to make OP

    • 1 year ago
      Anonymous

      why are there no more handguns with magazine in front of the grip?

      • 1 year ago
        Anonymous

        Because it adds length and weight to the weapon without increasing barrel length, which is critical for you to derive velocity and power.
        If your goal is to bring bore axis down as much as possible then you can find some benefit but for every other metric it's detrimental.

        • 1 year ago
          Anonymous

          I'd give up extra length to have an auto loader 357 mag with a forward magazine. Give me that long boi

      • 1 year ago
        Anonymous

        almost all target shooter do that

  7. 1 year ago
    Anonymous

    >300gr bullets should see upwards of 2000fps

    my homie what sort of barrel length do you think you need for that

    • 1 year ago
      Anonymous

      A full sized barrel length of 6 inches

    • 1 year ago
      Anonymous

      Don't worry, he hasn't done any math.

      • 1 year ago
        Anonymous

        >calculating the muzzle velocity instead of making a guess
        ngmi. We aren't even at the point in the process yet

      • 1 year ago
        Anonymous

        Its less than 500 bushwhacker, but I'm lazy af and not doing the case capacity calculations. It COULD work, but you not have a gun the size of a 1911 with the recoil energy of an African stopping rifle.

        • 1 year ago
          Anonymous

          You don't even have an African stopping rifle.
          Which is one of the differences between you and me.

          • 1 year ago
            Anonymous

            Cool. Go cut of the stock, chop the barrel and try to fire it one handed. Tell me how it goes.

          • 1 year ago
            Anonymous

            I'm not fat, which is one of the differences between you and me

          • 1 year ago
            Anonymous

            >brown
            >obese
            >of shit taste
            three things you are that I'm not

          • 1 year ago
            Anonymous

            fatass
            also can you reload the ammo, never seen anyone does that for some reason ?

        • 1 year ago
          Anonymous

          >mentions bushwhacker as defense for argument about handgun cartridge

          Stop. You have the desire but you need more information. I'm sorry the internet is so shit but you're going to have to do a lot more homework before you get to this point. It's even possible there's something usable in your idea, but this is macaroni art and you're posting on PrepHole.

  8. 1 year ago
    Anonymous

    Dis u?

  9. 1 year ago
    Anonymous

    >300gr bullets should see upwards of 2000fps.
    Nothing like exceeding blackpowder .45-70 rifle loads in a carry pistol. I’m sure that wouldn’t be cumbersome

    • 1 year ago
      Anonymous

      It isn't like he'd ever dare leave his mom's basement armed with anything less.

    • 1 year ago
      Anonymous

      >heavy barrel to handle the pressure
      >compensator
      >handling the gun like a man

    • 1 year ago
      Anonymous

      Don't forget, these velocities are from a 24 in barrel. Seems closer to the smokeless powder variants too.

  10. 1 year ago
    Anonymous

    8mm nambu reinvented

  11. 1 year ago
    Anonymous

    Here ya go, noguns

  12. 1 year ago
    Anonymous

    >Only people who are serious about self defense would be interested in this round anyway, it isn't for the casual crotch carry dandies. 300gr bullets should see upwards of 2000fps. This is the future, I just need to design a handgun around it
    lmao imagine being such a limp wrist pussy homosexual u think ur gay little pipsqueak round is worth anything vs a REAL MAN'S sidearm! 600ne is the basic self defense round and already invented. guess yours is good for putting in ur purse in the ladies powder room LOL

    • 1 year ago
      Anonymous

      How effective is this for concealed carry?

      • 1 year ago
        Anonymous

        No need to conceal

      • 1 year ago
        Anonymous

        why would you want to conceal your fashion statement?

  13. 1 year ago
    Anonymous

    >making me do math at 10am on a weekend
    I'm away from my work PC so it's hand drawn and basic
    >increasing the diameter of a 50ae cartridge by 50% then shortening it to .575 case length gives you 0.25 cubic inches of volume for powder
    >50ae cartridge has a case volume of 0.19 cubic inches
    The math in the pic is right but I changed the overall length of it by 0.1 for the powder increase
    Should be 2000fps easy

  14. 1 year ago
    Anonymous

    that's some stoppin' power right there sonny, shame it ain't a .46

  15. 1 year ago
    Anonymous

    How about .50 ae necked down to .30?

  16. 1 year ago
    Anonymous

    [...]

    ate
    OK noguns/recoilet.

    [...]

    one
    Please refer to above for a complete refutation of your existence.

    • 1 year ago
      Anonymous

      >brown
      >obese
      >of shit taste
      >coping
      >seething
      please add a couple more items to my list of differences

  17. 1 year ago
    Anonymous

    What kind of moronic pressure would your brick/handgun be operating at?

    • 1 year ago
      Anonymous

      He doesn't know, he's too stupid to do math.

    • 1 year ago
      Anonymous

      50kpsi. I don't know why anons keep on doubting me

      • 1 year ago
        Anonymous

        50k psi with a .72 inch bolt face would yield bolt thrust pressure approaching magnum rifle territory you dolt.
        Even 50AE maxes out at 36k.
        You will never make this work in a handgun unless it is 2.5" wide and weighs ten pounds.

        • 1 year ago
          Anonymous

          You are making no sense anon. Islts almost like you are a Russian trying to derail American ingenuity

  18. 1 year ago
    Anonymous

    [...]

    oh
    >noguns
    >recoilet
    >blind
    >moronic
    >herbed
    >no(you)
    Oh yeah, we've got a /misc/tard itt.

  19. 1 year ago
    Anonymous

    I have the perfect gun for this round. Hurry up and get it made.

  20. 1 year ago
    Anonymous

    I’m so annoyed by the imperial units

    • 1 year ago
      Anonymous

      And that's why you aren't the undisputed world war champ, bucko.

  21. 1 year ago
    Anonymous

    [...]

    three
    Let's add ESL to the list of traits OP has displayed.
    Of course I can reload it, you moron, that's half the fun.

  22. 1 year ago
    Anonymous

    >300gr bullets should see upwards of 2000fps
    >Only people who are serious about self defense would be interested in this round anyway
    Self defense against what? If it's humans then this velocity is too low even with the larger bullet diameter. You need to acquire an understanding of wound profiles and what kind of bullet and velocity works best against human flesh.

    Pic related is a good demonstration. You can see that 5.56 is absolutely superior against a human sized target when compared to 7.62x39. However, that same 7.62x39 which mostly just pokes neat holes in humans would fare much better against a Grizzly Bear than 5.56 would.

    If you don't understand why 5.56 is more devastating against a human than 7.62x39 but 7.62x39 is more devastating against a bear you need to think about this example so you can understand why your new boutique round would be a poor choice against humans. It's just going to zip through them leaving a .50" diameter wound.

  23. 1 year ago
    Anonymous

    A cz52 style firing mechanism scaled up might be able to handle your round. It uses a short recoil, roller locked mechanism. The same as an mg42.

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *