The one person killed by back face deformation was hit with a 45-70, it didn't penetrate, but did lethally drive the vest into his chest.
https://i.imgur.com/7AMNUio.jpg
I hope you meant IIIA.
Kind of curious about how I should test some panels I just got that claim to be lvl II, but I afraid they may be zylon. Maybe I'll go pop them with a .22.
SAME BROTHER, I FEAR NO MAN..... THE ONLY THING I FEAR IS MY OLD LADY!! HEHE......
____________________________
BRUCE "BOOMER" RICHARDSON
USPS 72-11 RETIRED
I STAND FOR THE FLAG....... YOU DON'T EVEN STAND TO PISS!!
[C:UsersBRUCEDesktopUSPS_RAIN_HAIL_SHINE_COMMIE.jpg]
>thinks this test proves anything beyond the video creator not having a basic grasp of mechanics
you aren't testing for penetration when the barrier is allowed to rotate its central axis 270 degrees when hit.
Solid copper 5.7x28 rounds
Liberty civil defense 9x19 50gr schp
Fort scott TUI copper solids (lightwr weight ones)
.357sig 65gr lehigh xd's
9x19 +P+ 65gr lehigh xd's
And thats before you start getting into anything spicy. Stick a section low iron content nickel welding rod (for welding cast iron) in a plastic sabot with a copper disc superglued to the bottom to take the pressure and load it hot and you'll probably have a 50ish gr projectile with the capability to punch 3A even at steep angles. Or cast zamak27 alloy spire point "fmj" projectiles, drill them out like the old THV design and fill the entire case and part of the hollow base with powder to hit 24-2500fps in an alloy harder (slightly) than brass.
Monitoring this thread for interest
Sauce for the gif
hunter x hunter, chimera ant arc
The stuff that level 3 is rated for but level 2 isn't.
this isn't hard, anon.
I hope you meant IIIA.
> .44 mag from a Mare's Leg or 12 guage slug
> Soft armor
Better than dying, but man, ow.
The one person killed by back face deformation was hit with a 45-70, it didn't penetrate, but did lethally drive the vest into his chest.
Kind of curious about how I should test some panels I just got that claim to be lvl II, but I afraid they may be zylon. Maybe I'll go pop them with a .22.
damn, thought decent 357 could tear through 3a but it looks like only 44 can maybe do that.
7.62x25 Tokarev is the good ol' "armor penetrator" for a reason.
Only a few selected NIJ III-A rated vests can claim to stop it.
In general, threads like this makes me very worried about current /k/unt generations knowledge.
bumping tokarev, pistols are still cheap yugo surplus (for current year at least) and ammo is western made
Liberty civil defense rounds
Level 2? Some of those lightweight +p 9mm will zip through. 7.62x25 will go through, I'd imagine most 5.7 rounds will go through as well
www.ammothatpenslvl2bodyarmor.com
fricking shit OP why do you have to be so moronic.
Who hurt you?
my wife
I laughed out loud to this.
Only grown men understand this level of humor
HEEHEEHEE TOO RIGHT BROTHER, THEY DON'T CALLEM THE OLE BALL N CHAIN FOR NOTHING!!!!!
SAME BROTHER, I FEAR NO MAN..... THE ONLY THING I FEAR IS MY OLD LADY!! HEHE......
____________________________
BRUCE "BOOMER" RICHARDSON
USPS 72-11 RETIRED
I STAND FOR THE FLAG....... YOU DON'T EVEN STAND TO PISS!!
[C:UsersBRUCEDesktopUSPS_RAIN_HAIL_SHINE_COMMIE.jpg]
357mag
357sig
5.7x28 (all but the blue tip)
10mm
.50ae
deeznutz
5.7 might.
All the others you posted wont.
Incorrect. The bullet is all that matters.
I didn't watch, but if it's shitty liberty fefence or whatever, that doesn't even penetrste enough through bare gel.
K. Enjoy your non-armor penetrating ammo then I guess
Doesn't matter, even without armor it gets like 7" in BG, which is like 3" in actual tissue.
Through armor is literally just a flesh wound.
>not NIJ rated
Nobody here cares about aliexpress chinkshit
You're fricking stupid, no 5.7 ammo available to civilians can penetrate body armor, copper screw bullets in .357 and 10mm can.
A pistol AR in 5.56 will with any ammo
9mm with most solid copper bullets.
No they dont.
Even 115gr copper 357 sig won't
>thinks this test proves anything beyond the video creator not having a basic grasp of mechanics
you aren't testing for penetration when the barrier is allowed to rotate its central axis 270 degrees when hit.
Are you moronic? It doesn't matter if the vest can move or not, that's not how bullets work.
which projectile is more likely to penetrate the barrier, the blue or red?
This will, but you will never get your hands on one.
>What pistol ammo, for any pistol caliber will go through level 2 body armor that you can legally purchase?
9mmP+
44Mag
357
5.7
7.62x25
Think that civil defense liberty ammo can do it. The 10mm 60gr shoots at 2400 fps out of a 5” or 6” barrel.
Get czech surplus 9mm it's iron core and zips through level 3a.
Solid copper 5.7x28 rounds
Liberty civil defense 9x19 50gr schp
Fort scott TUI copper solids (lightwr weight ones)
.357sig 65gr lehigh xd's
9x19 +P+ 65gr lehigh xd's
And thats before you start getting into anything spicy. Stick a section low iron content nickel welding rod (for welding cast iron) in a plastic sabot with a copper disc superglued to the bottom to take the pressure and load it hot and you'll probably have a 50ish gr projectile with the capability to punch 3A even at steep angles. Or cast zamak27 alloy spire point "fmj" projectiles, drill them out like the old THV design and fill the entire case and part of the hollow base with powder to hit 24-2500fps in an alloy harder (slightly) than brass.
any caliber will work if you aim for the head
Lehigh Xtreme Defense or Liberty Civil Defense will blow through lvl 3a even in .380 ACP.