If I ask nicely, do you think they would make a bullpup rifle in .375 H&H Magnum with an underbarrel p50 mechanism built upside down (so that the magazine attaches to the bottom, but the grip is also still on the bottom)?
I'll never forget putting satchel charges on random enemies and watching as they endlessly run around wailing and flailing their arms while my thumb hovers over that button. good times...also that mega rocket launcher kicked ass.
1975? I thought Steyr largely had the final design done by that time. 2 years seems like a very short time to go from that horrid looking thing to the final product.
It's garbage. The gun is flat and the clip draw places the grip below the belt line. It's basically unusable.
I got an NAA black widow with a ulti clip holster for that type of carry. Much, much easier to draw.
not that anon, but I have one on my LCPII and I love it. It obviously has its drawbacks, but it has alot of benefits too. I can carry it in any outfit effortlessly, it never prints so you dont have to worry about bringing it into non-permissive environments, and I can switch it from appendix, to lowerback, to pocket for comfort easily if I want.
It's a CC that you can and will carry with you everyday, so for me that makes it great.
oh hey i got one of those too! well its the only thing i have actually. Its a good deal of fun to shoot. cheap too. Did you get the speed loader for yours? i was thinking about getting one
I found i needed higher pressure stuff and even then i get a few jams now and then, i have a feeling thats the price for rimfire. Maybe try keeping yours more moist as mine is fairly dry when i think of it.
oh i should mention that before hand most of my issues were Fails to feed with the round getting like 40% into the chamber. There isn't a forward assist but whacking the back of the thing would knock it into battery. Most of my current fails are failure to eject with a casing not quite making it out all the way
I also have one, speedloader is a must, loading the mags by hand is a fricking pain. Also got the 50 round mag extensions and a brace to complete the burger MP7 LARP.
wait did you try painting yours? You know you're going to need a primer for that polymer lower right that's the only reason i can think of that thing being so chalky
considering i paint models in my free time i probably should have known better. That and my airbrush kept clogging so i just said frick it an wiped it all off
i bought a speed loader because people say its a 'must have' and its fricking pointless, it's much easier to just do it by hand. the biggest barrier to loading the magazines is not the spring tension from the follower its the fact that its 30 rounds
there's some kel-tec forum and people keep cracking magazines and i have a feeling it has something to do with them being boomers and wrenching a speedloader for every round
[...]
[...]
I'm waffling between one of these and some bog standard .22 revolver. If any of you are still around do you have strong feelings about the CP33? Would you buy it again?
it's a pretty cool pdw but it's not a pistol. its a cheap flimsy gun but kel tec will fix anything that breaks. due to being a quad stack rimfire magazine with a feed ramp built into the magazine, it is extremely fickle with what ammo feeds reliably. i bought mine before they dropped in price and its definitely worth it at $450 as long as you understand it's a toy mp7
oh hey i got one of those too! well its the only thing i have actually. Its a good deal of fun to shoot. cheap too. Did you get the speed loader for yours? i was thinking about getting one
https://i.imgur.com/94dW9Im.jpg
I'm waffling between one of these and some bog standard .22 revolver. If any of you are still around do you have strong feelings about the CP33? Would you buy it again?
i kinda got jipped on mine because it went on sale the week after i got it fro 100 less. But yeah i'd buy it again. Hell the money ive saved buying .22lr has made it worth it for me. I can buy a box of 500 for like 35 bucks and that'll last me a good two hours and i'll normally have some left over because my ears need a break from the muffs at that point
A man who can comprehend a keltec and the reason it was made the way it was has done too much cocaine to be able to check no on question 11.e. of his 4473
You know how Grendel was a thing before Kel-Tec? They also made flashlights in addition to guns. Bizarre thing that looks like a hand grenade and uses 8 AA cells. I have two. The coke must have been flowing freely in the '80s.
There are things that keltec could improve on but one thing I will say for their defense: They are not afraid to experiment.
And because of that fact, they will, logically, arrive at a truly excellent gun in time.
The best keltec
Obligatory.
Roll
Rolling for pump action .50bmg
bump
Rolling for burgess style .357 sig
>this post and every reply has ended in a 2 or a 3
Kel Tec must really need more pistols.
>Needs more pistols
>Makes a DI PDW
How very Kel-Tec, and I want it.
Rolling.
Guys I'm scared.
>478
>493
rollan
Rolling for dubs
ROLLER DELAYED .50 BMG CARBINE AND I GOT EXCEPTIONAL NUMBERS. BLESSED BY THE COCAINE GODS
>roller delayed 50 cal pdw
This some serious German autism
don't post rolls butthole, but since we are here
Yuh
Rollin
r0ll
>takedown 9mm bullpup with waffle furniture
So a bullpup Sub2000? Could be worse
Well fricked that up (I’m
) but it looks like I’ve got basically the same thing anyway the second time round
Rawlin
Cum on Cocaine
Also obligatory
Rollan
Here we go please make me good
Damn I'm good thx for the coke
roll an
Maybe I'm just stupid, but doesn't having your scope that far up your rifle super frick with the aim?
holy shit im screaming what the frick is this
A FAMAS, clearly
it's famas gore sir
what?
Is that a FAMAS?
I actually did something similar not too long ago.
God will never forgive you
I call it a fauxmas.
Is that kit someone makes? Or did you just chop up an airsoft FAMAS?
Airsoft parts as a proof of concept. The guy who made the other RDB famas did the same.
I mean it looks great, if someone were even to do a small batch of well made ones, I’d buy one and an RBD immediately.
Any one got a p15 yet?
Rollin
Lets see what I get.
Rolling
>Break action .308 PDW....
Quite literally my least favorite kind of weapon. Goddamn it.
Roll 2
I'm out frick you guys
Blowback 50bmg pistol
pls
Rolling
break action .22lr time
Electronic trigger activated barrel stacked bullet metalstorm style .22 break action triple barrel with integrated cantilever 1-30x LPVO thermal scope and removable stock integrated speedloader
The weapon of tomorrow
keep ROLLING ROLLING ROLLIN ROLLI ROLL
Roll
Please be takedown 10mm bullpup.
Roll-er delayed roll action
Rollan, give me something good
Rollin rollin
not bad
Oh yeah baby. Its Gamer time.
Also whatever I get will be vehicle mounted.
rollin
bump
Roll for rolls
again
Roll
Rolling and I will be blessed by keltec gods
giv gun pls and thx
Rolling for fun
Cmon baby 6-4-1
Rollin, cuz why not?
rollan
If I ask nicely, do you think they would make a bullpup rifle in .375 H&H Magnum with an underbarrel p50 mechanism built upside down (so that the magazine attaches to the bottom, but the grip is also still on the bottom)?
roll
rwalin
rawlin
roll
rholl
Roll em
roland.
Rowl
Rolling
roll
Roll
Roll
rollin
Time to see what I'm rocking in MW3 remake
Roll
HIIIIIIIIIIIGH ROLLLLLLLLLINGGGGG
Daddy wants something spicy
rolleiung
love it
Roll
Clickity clickity clack da da needs a new pair o boots
>snifffff
>WOOO
>snifffffff
rrollig
second roll for the shits.
roll
Rolling for Alyssa
roll
roll
kinda boring ngl lets try again
I'll never forget putting satchel charges on random enemies and watching as they endlessly run around wailing and flailing their arms while my thumb hovers over that button. good times...also that mega rocket launcher kicked ass.
1975? I thought Steyr largely had the final design done by that time. 2 years seems like a very short time to go from that horrid looking thing to the final product.
swipe me a line, chief
so a sawn off, lever action, takedown action, 12 gauge shotgun?
neat!
roland
Black person
rolling
Frick it. Roll. What's the worst that could happen?
>roller delayed .357 magnum carbine
What did i make?
ROLL CREDITS
Frick that, reroll
what will the coke addicts be building today? Roll big money
Why not
Flywheel delayed .357 Sig pistol.
Wouldn't be the nuttiest thing a Kel Tec engineer came up with.
God i hope for a high capacity shotty.
I'm a lefty and if this isn't Ambi I'm beyond fricked. Still sounds like a fun thing to hear for the last time.
Alas, a 50 round bullpen chambered in .357 Sig.
Might be kind of wild.
roll
Rollin
Rolling
>20 gauge break action bullpup
I await your design document soon anon
frick it im in
Hey
I want more cocaine so bad.
rollen
why not
rolling again
half a second off from a mountain of cocaine, that sucks
Roll’s
Rollies
I roll and I troll.
Ohh
Rollan
ROLLAN
>direct blowback 308 long gun
rip in shit and piss frickers
Florida swamp guns for shooting gators and haters
can I get a he'll yeah brother
How is carrying it with that clip thing? I’m a big drawstring shorts kind of guy.
It's garbage. The gun is flat and the clip draw places the grip below the belt line. It's basically unusable.
I got an NAA black widow with a ulti clip holster for that type of carry. Much, much easier to draw.
not that anon, but I have one on my LCPII and I love it. It obviously has its drawbacks, but it has alot of benefits too. I can carry it in any outfit effortlessly, it never prints so you dont have to worry about bringing it into non-permissive environments, and I can switch it from appendix, to lowerback, to pocket for comfort easily if I want.
It's a CC that you can and will carry with you everyday, so for me that makes it great.
Why is there an 'and' between Polymer cocaine, this is Keltec right?
my stupid CP33 is my go-to cyberpunk larp pistol
oh hey i got one of those too! well its the only thing i have actually. Its a good deal of fun to shoot. cheap too. Did you get the speed loader for yours? i was thinking about getting one
NTA, but does yours jam a lot mine has trouble feeding sometimes
not that anon, and i haven't shot mine in forever, but IIRC higher grain stuff feeds perfectly fine, it's the lower grain cheap stuff that sucks ass
i read 36 grain doesnt do too well, Im shooting 40 grain tho. hopefully its a break in period or something
It’s all about how you load the mags. You have to be careful to do it correctly.
this, you have to be sure the rim of the previous round is behind the rim of the one on top of it
i got one of those speed loaders which definitely helps, still have some issues than i used to tho
I found i needed higher pressure stuff and even then i get a few jams now and then, i have a feeling thats the price for rimfire. Maybe try keeping yours more moist as mine is fairly dry when i think of it.
oh i should mention that before hand most of my issues were Fails to feed with the round getting like 40% into the chamber. There isn't a forward assist but whacking the back of the thing would knock it into battery. Most of my current fails are failure to eject with a casing not quite making it out all the way
theres this improved magazine release thats supposed to help. I might try that, it's just a touchy gun in general it seems
I also have one, speedloader is a must, loading the mags by hand is a fricking pain. Also got the 50 round mag extensions and a brace to complete the burger MP7 LARP.
wait did you try painting yours? You know you're going to need a primer for that polymer lower right that's the only reason i can think of that thing being so chalky
considering i paint models in my free time i probably should have known better. That and my airbrush kept clogging so i just said frick it an wiped it all off
i bought a speed loader because people say its a 'must have' and its fricking pointless, it's much easier to just do it by hand. the biggest barrier to loading the magazines is not the spring tension from the follower its the fact that its 30 rounds
there's some kel-tec forum and people keep cracking magazines and i have a feeling it has something to do with them being boomers and wrenching a speedloader for every round
it's a pretty cool pdw but it's not a pistol. its a cheap flimsy gun but kel tec will fix anything that breaks. due to being a quad stack rimfire magazine with a feed ramp built into the magazine, it is extremely fickle with what ammo feeds reliably. i bought mine before they dropped in price and its definitely worth it at $450 as long as you understand it's a toy mp7
I'm waffling between one of these and some bog standard .22 revolver. If any of you are still around do you have strong feelings about the CP33? Would you buy it again?
id probably buy it new, I got mine used for like 2/3 the price of new and it has some major feeding issues
i kinda got jipped on mine because it went on sale the week after i got it fro 100 less. But yeah i'd buy it again. Hell the money ive saved buying .22lr has made it worth it for me. I can buy a box of 500 for like 35 bucks and that'll last me a good two hours and i'll normally have some left over because my ears need a break from the muffs at that point
>kel tec
>manmade horrors beyond your comprehension
skill issue
A man who can comprehend a keltec and the reason it was made the way it was has done too much cocaine to be able to check no on question 11.e. of his 4473
I'm trying to post my RDB with the raptor rail, but my POS phone can't handle the memory requirements of a sub 4Mb image.
500 rds through and no malfunction, pleased with it so far. Far more accurate than i expected.
Doubtful of hard use longevity but as a 4lb truck/backpack gun/range toy, its a hell of a package
nice douk douk
I would trade human lives to see a Kel-Tec weapon adopted as a nation's service rifle.
so... are these actually good?
RFB is better.
>doesn't use SR25/M110 pattern mags
Trash
>M110
First went into service the same year the RFB hit the market you homosexual.
It's KelTec so it's the budget option, but it'll do the trick.
Budget? Aren’t Rdbs $1200 have you been poor before? Cause that does not sound like budget
i saw RDBs for as low as like 750 on gunbroker and some places before 2020
1200 is pretty budget compared to 1700 and 1900 dollar AUGs and Tavors
its the cheapest bullpup by like 1k i bought mine for like 850
If Kel-Tec could stop using fricking wood screws to hold their shit together maybe they'd have a chance
kino
Is... this real? Is it for sale somewhere?
Yea homie it’s been out for years. CP33.
>CP33
>Cries in Canadian
Theres a p15 on gunbroker now.
You know how Grendel was a thing before Kel-Tec? They also made flashlights in addition to guns. Bizarre thing that looks like a hand grenade and uses 8 AA cells. I have two. The coke must have been flowing freely in the '80s.
Anyone mess with the SU-16? I'm looking for something to carry around farmland
>Plastic receiver rails
>5.56
Yeah I’d go at least RDB so when it explodes, it’s at least contained by metal instead of polymer.
i always found it kinda neat that there are a few 3d printed parts in keltec guns. Like the little buffer in the CP33
Rare
does that even work?
Rail gun
me likey
rolla
anons with RDBs would you recommend them? I've been thinking about either getting it or the hellion it is half the cost, but well keltec.
Sex
I love waffle furniture, I want an AR kel-tec furniture parts kit
Honestly I wish they had a better logo
Pcc
Does anyone have a P50? They got cheap as frick, thinking about getting one.
It's fun but unpleasant. I really want an RDB.
There are things that keltec could improve on but one thing I will say for their defense: They are not afraid to experiment.
And because of that fact, they will, logically, arrive at a truly excellent gun in time.