If the load isn’t very wide and it’s thinner than the bottom blade/platform, then struts like this anon said
diagonal strut
If the object is wider than the platform but it’s only going to be on the end of the blade, you could still run a strut like halfway down the platform and get some support.
Move the axle to the middle of the "trailer". Otherwise weight will deload the front bit and try to lift the bike which will suck when you're not sitting on it.
Of course, note axle position. Even a forward facing fatfrick in a chair will have xirs weight over the axle. That's a rather nicely designed trike. Add a good electric conversion kit (there's ample room for batteries mounted to each side of that long steering head or on a rack or saddlebag style mounts behind the seat) and you'd be set.
Being a trike both front wheels could have hub motors making plenty of torque without overloading a single motor. I like it. Thanks for the pic.
diagonal strut
OHHH
THEY LOOOVE TO WATCH HER STRUT
HMM
YYYEAH
Why would you use a hand truck in the most wrong way possible?
I need the load at the end of the platform
explain what you are trying to do in detail
I'm building a cargo bicycle from scrap metal
Why not use bamboo and carbon fibre?
>cargo bicycle
Why do you hate yourself and your own well-being so much?
If the load isn’t very wide and it’s thinner than the bottom blade/platform, then struts like this anon said
If the object is wider than the platform but it’s only going to be on the end of the blade, you could still run a strut like halfway down the platform and get some support.
Depending on what he's trying he could also lash it after mounting the weight?
Oh, dont' worry. See updated picture. Once you move it you do this
Hire Rick Shaw to weld it
sparky sparky five dorrah
me weld you long time
do you understand the principles of leverage?
i dunno man I never went to school in lethbridge
Here bro I made you a diagram how to do it
Put castering wheels at end of platform and next time post details and a photo you moron.
triangulate!
Engineer here. This is how its done.
No, use balloons instead!
Move the axle to the middle of the "trailer". Otherwise weight will deload the front bit and try to lift the bike which will suck when you're not sitting on it.
This is designed for a wheelchair and somehow doesn't tip over
Of course, note axle position. Even a forward facing fatfrick in a chair will have xirs weight over the axle. That's a rather nicely designed trike. Add a good electric conversion kit (there's ample room for batteries mounted to each side of that long steering head or on a rack or saddlebag style mounts behind the seat) and you'd be set.
Being a trike both front wheels could have hub motors making plenty of torque without overloading a single motor. I like it. Thanks for the pic.
Cantilevered counterweignt
suspend everything from a gantry
Good thought, usually takes a crane to get it out.