are feds here trying to get us to not talk about 3d printing guns and upgrades of guns, by saying we'll 'glow'?
isn't "skipping their halfassed intel systems commercial sales controls" sort of contextually the opposite of glowing?
are feds here trying to get us to not talk about 3d printing guns and upgrades of guns, by saying we'll 'glow'?
>NOOO YOU CAN'T MAKE THINGS FOR YOURSELF
you tell me. literally any form of product control stems from bureaucrats' ear
glow harder Black person
actually speaking of, OP here, check out odysee.com, it has all the cool printable guns (pic related, AWCY Ark), and try to guess which is mine.
Hi homosexual, maybe you haven't seen the shit about people not only printing 37mm grenade launchers, but the ammo for it too? BESIDES all the reliable printable gun designs that are out there already- there are so many glock magazine ar15 parted straight blowback 9mm carbines that you should never buy one again.
Arguing to stay stupid, keeps you stupid.
tell them they're homosexuals and keep fricking single mothers.
Damn this is cringe just cringe you dumb troony.
>tell them they're homosexuals and keep fricking single mothers.
*their single mothers
Fixed.
please call the 37mm stuff "flare launchers"
>Thinks his shitty 9mm carbines with printed mags are better than factory made guns
Underage detected
people shoot matches with menedez mags. go demoralize elsewhere.
People shoot matches with all sorts of crazy shit, go be underage elsewhere.
ok ossifer.
>underage
>underage
>underage
gb2r with your homosexual ass
Seethe more child with your nonreinforced plastic mags you think are justasgood. Its one thing to say printing gun parts is cool, but the prints aren't as good as modern manufacturing. Being delusional about your shitty hobbyist printer results is the mark of a child who can't buy actual pistol mags or a felon/moron.
you have like 3 people calling you a homosexual and you think it's just one person moron
I don't care you're all poor or underage because you think fricking shitty 3D prints are as good as injection molded metal reinforced mags. I don't care if you invite your whole fricking discord server, I'm right.
I'm just not reading your moronic posts. I just wish you'd put a name on so I could filter you like that other homosexual.
Seethe underage, why don't you post some of your shitty prints so we can laugh at you.
nah he's right, you think you're being backed up by other people but he's actually right and you're just a fricking moron
this is funny to watch
mrcrummy paws fricks dogz
Not that there's anything wrong with that.
You need jebus anon
if you cant understand why open source and unbannable gun designs are good then you dont deserve to be on here
no shit 3D printed guns arent as good as actual metal, factory made ones
but not everyone can get them and the files being open source means anyone can improve upon the design and make it fit whatever spare parts they have laying around
Lathe sperg? Is that you?
homosexual can't-make-a-sten-gun-gay
You are a failure and everyone else has no problem succeeding where you have failed.
You are alone.
>maybe you haven't seen the shit about people not only printing 37mm grenade launchers
you mean that thing that i could throw further than it shot?
thump and grind?
i could literally throw a fricking rock further than that piece of shit can shoot
show me a true high low system and then i'll be impressed
you've done nothing but pick a chinese mortar tube off the ground and put a grip on it
you're so fricking gay dude shut up lmao have a nice day with a flare launcher homosexual
now that's what i call asspain
Trip gay, opinion discarded.
>tripgay
Film yourself throwing a rock 400 yards, I'll wait.
I'm assuming you've seen one shoot a single very low powered shot on some occasion, and that's what you base your shitty opinion off of.
They'll hold the legal limit of powder no problem, that means pushing 150 to 400 yards depending on your choice of marker and load.
Frick yes I've seen Thump 'n' Grinds and GU-37 launchers pushing chalk markers past the quarter mile mark.
I'd wager you don't know what the frick you're talking about, because if you'd actually built one, loaded ammo for it, and shot it, you wouldn't be spewing shit from your facial sphincter.
literally watch the fricking video AWCY put out of it functioning moron
it's not a high-low system, it's a fricking mortar tube with a trigger on it
High-low systems in grenade launchers are purely based on the ammo you fricktard.
I'm not sure you know what a high-low system is.
My Thump 'n' Grind pushes well past 1000ft with ease, if yours doesn't (because it doesn't exist) that's your problem.
Stop crying because you don't own anything fun or interesting and are too stupid to make something yourself. Buy a can-cannon and piss off back to Youtube kiddo.
I'll be popping chalk rounds while you cry about something you clearly know nothing about.
>High-low systems in grenade launchers are purely based on the ammo you fricktard.
show me your high-low shells
Nobody is arguing that it is a High-Low system, you're just b***hing because what, the rounds in the default pack aren't high-lows? You're b***hing because people don't want to frick with tax stamps and would rather print chalk rounds and fireworks.
I don't know of a homemade high-low cartridge for 37mm launchers, don't know why you're so fricking interested in them.
that was a major goal post move
god damn lol
you just backed the frick down quick
go ahead and post your 1000ft rounds, let's see em
Why was that ever a goal post though? You're still the only one screaming about it. I thought it was weird that you were asserting the launcher wasn't high-low, when launchers aren't high-low, rounds for grenade launchers can be.
Brass rounds like these, both sleeved and "solid" options, are very popular, and they can absolutely toss the shit out of a heavy load.
Maybe look at more than one video, I don't record myself shooting because I'm not doing it for the 'gram.
Again, you don't know what you're talking about, you're just spouting shit because your dog needs a break between dick-downs.
>reddit shit
you're a fricking joke lol
go back dude, just fricking leave this place
go back and flex your bullshit of likes over there, there are no likes here
holy frick i just saw the "HOW CAN RITTENHOUSE BE INNOCENT" on that
FRICKING KEK
you god damn troony homosexual leftist scumbags disgust me
this is why people are waking up to printgays and how fricking awful they are, you're destroying your own cause
Sorry kiddo, I have fun with my guns and you apparently don't. Yeah, it's an image I found on reddit, was a good pic of some brass rounds.
Sorry you have it so bad, no dick, no dog, no guns, no life.
you're garbage, go back to red.dit where you belong
>look at my gun
>uhh actually that isn't mine
go ahead and post your grenade launcher, post the shells that shoot 1000ft too
im waiting
Never said it was mine homosexual, not taking pictures for your dumb ass. Hope you have fun jacking off with dog shit while I shoot things.
>i-i have it okay
>i just don't feel like taking pics
>i'll keep replying to you for the next 6 hours though
Holy shit still crying? No, I don't have brass rounds lying around, I might have a few one-piece ramset rounds still. I'm having fun picking what color to make my next piece of shit Taurus.
You make it pretty clear you don't know shit about firearms and just troll folks who like guns, I'm assuming you suck your own limp wiener when your dog is busy.
>I actually don't have the 1000ft rounds ok
>but I swear I have the gun
>you'll just have to take my word for it
Every goalpost moved, every lie exposed
People are noticing how full of shit you homosexuals are
I love opening these threads and seeing other anons shitting on you homosexuals, makes my day
>other anons
>tripgay
so people can identify the dog fricker
anon be proud of that b***h bussy.
Never taken pics of my shit before, not starting for you.
You put up imaginary goalposts screaming about something you have zero knowledge of, your dog probably gave you worms kid, tell your mom.
You have nothing kek
Where is a tripgay?
Show us something you've designed and made. Nobody knows your name homosexual non-anon.
I've posted my cetme jigs and my AR milling and hole jigs plenty of times
I made all those from scratch
Yet here you are refusing to post proof of literally anything you claim to own
I see no trip anywhere
>took the code off and kept the name
>iT's tOTalLy diFFerEnt
Frick off newbie.
I'm willing to bet you weren't born yet when /k/ started Black person breasts.
I've been here since 2008
Been on the internet since like 1997
I used to post on TOTSE and roguesci kek
You probably don't even know what those are
You've been here since you got laughed off PrepHole and you needed something else to pretend you know shit about.
>I know a lot about stuff and i own stuff
>I won't post any sort of pictures or proof of any kind and I refuse to back up a single one of my claims though
Excellent, I am swayed
Can't call out random anons non-anon, you don't know who you're yelling at.
Except me, I'm you, because gays.
I love calling kettles black.
Did you touch my fricking beard?
No, I was in my lab.
So almost 5 years late. You made my point thinking fricking totse is old lawlgay, I bet you were so inspired by the article on how to jerk off hamsters.
Go back to working in metal, boomer.
>left my name on to try and own me
Bro I have you losing your shit right now and everyone is watching
>I'm the real BigC
Frick off SmallC
>I have the grenade launcher ok
>I just don't feel like taking a pic
>but I will keep replying until this thread 404s
I can't wait to see your next thread where you jump down anyone's throat who says you're a moron thinking they're me without a name
Those always make me feel so validated
>totally happens every day
>kek i'm internet badass and /k/ loves me
Good luck with that
It happens every day, yes
You reddithomosexuals come here to try and get your dicks stroked and when people tell it how it is you lash out
You're used to the constant hug box of reddit and don't know how to act here
Yes, not having any knowledge about subjects you speak of is just everyone else's fault.
>has cum on paws
>still smarter than BigC
I'm smarter then everyone.
You can tell because I keep talking about all the shit that I only have surface level opinions about.
>rage, self pleasure, rage
What the frick is this guy doing here? You must seriously hate guns, frick off you liberal troony homosexual.
>I can't believe Rittenhouse was innocent
>THIS IS NOT FRICKING COOL
>y-youre a heckin liberal!!!!!!!!!
This is so painful to even interact with
You need to work on your shit bro lol, you're not fitting in at all
Yeah dude lmao, they just can't beat us c.2018 oldgays.
I WAS ON TOTSE WHEN I WAS IN DIAPERS, RESPECT ME
Why the frick are you talking about Rittenhouse now?
Holy shit have your mom tuck you in buddy, you're way past your bed time.
There is at least one other person doing it, sorry buddy, no helping it now. It's neat that you think you're internet famous on PrepHole.
>Doesn't know how guns work
>Doesn't have a 3D printer
>74% Body Fat
checks out
I have a 3d printer
I have and use solid works to make my own shit
I am 130lbs and 510
You don't know who I am and it shows how new you are here
>If you don't know me you must be new
BigShit thinks he's special, how cute.
Put your name on something you've designed and published or frick off.
How about you post a pic of your 1000ft grenade launcher
Lol
Naw I'm not an attention prostitute tripgay, don't need senpai to recognize me.
You're citing a video that everyone jokes about because it was such a weak demo of the system.
There are fricking shitload of rounds you can make for 37mm launchers. It's just a 37mm launcher. You put 37mm rounds in it. That is all. It's not intended for antipersonnel rounds, as that would make it a destructive device.
I like the net rounds a few people have designed, I've successfully caught plenty of rogue soda cans out of the air.
What exactly are you crying about? Can't hear you with your dog's dick in your mouth.
post yours firing 1000ft, show me your high-low shells
show me literally anything lol
>high-low shells
>37mm
Ignorant Black person.
Go back to PrepHole and learn how to drive.
>are feds here trying to get us to not talk about 3d printing guns and upgrades of guns, by saying we'll 'glow'?
No
No, we tell you to buy a reputable gun and stock ammo and mags.
no zoomer , 3d printed guns just suck
this
How many printed guns do you have? How bad are they? None, I assume.
3D Printed guns are fricking awesome, inexpensive, and hugely entertaining.
If you only own guns for personal defense and think shooting anything that doesn't have a pulse is a waste of time, you can frick right off. Do you give shit to people who practice on paper targets too? God forbid, plinking?
Tell me what sucks about a 3D printed gun, and back it up.
All of mine have been reliable, massive amounts of fun, great conversation starters, and give me no issues. However, they do save me tons of money, so there's that I guess. Do you hate money?
Frick off prick, some people like guns and don't strictly own them to compensate for a limp dick and a sore sphincter. You're the guy who gets kicked out of the range for loudly and dangerously expressing his small-minded opinions while others try and have a good time.
t. guy who fricked up in the slicer and can't even print a benchy
He's the guy who isn't allowed back in to the public library because he tried using their machine to print a girlfriend.
You upset because you don't actually know how your gun works? Afraid to take out a single pin because you can't put it back together? Scared you'll blow your hand off if you so much as remove the slide once?
Suck a dick homosexual, enjoy your little McDonalds McGlock while I grill my own steaks.
It's so tiresome
Can't discuss anything without schizos butting in with nonsense. Post a 3d printed lower and everytime some autist comes out of the woodwork saying it isn't a true 3d printed gun because not all of the components were printed.
And glocks aren't real guns because they use injection molded plastic parts!
>he 3d prints his guns
>he doesn't 3d print his ammunition
yare yare, ngmi
Yes.
3d printed and self machined firearms are awesome.
Flux hasn't restocked the SBR raider I'm tempted to just make it myself at this point
I'm still baffled that there are people own 3d printers and don't use them for guns.
They make tacky dollar store shit, but not custom gun furniture. This world is so soi.
Yeah it almost discouraged me from purchasing one when I saw how much gay shit was printed like spiderman figures, but since I'm familiar with mainstream commercial cad software it's great to print regular appliance parts as well as the frame I'm currently making
Only thing that I wasn't expecting, because of my lack of research, was the amount of time it takes to produce something decent
thats what they're going to not mention when time comes to screech about 3d printers. you can't just buy one, plug it in, press go, and have an untraceable ghost gun undetectable by xray. it's a tool and you have a lot to learn if you want anything good out of it. GL anon.
As someone who has never 3D printed anything, can you elaborate? I thought you did literally just plug in the files and then the printer made it.
3D printers, even pretty expensive ones, have at least a couple calibration processes that need user interaction before they will work reliably. If you can't do those processes correctly, you'll get a big pile of shit instead of good parts.
basically this
and over time the things start to unlevel themselves requiring that calibration process again as well as issues with feeding filament or heating or whatever may go wrong needing user troubleshooting and repair on top of testing temperatures and settings for different materials. they're impressive machines but they still require maintenance and foresight. and once it's all said and done you still have to work with metal and purchased parts.
Most likely the best way forward for the super-DIY side of gun making is to take a page from from the global village construction set.
>https://en.wikipedia.org/wiki/Open_Source_Ecology
Figure out which machines beyond a 3D printer + hand tools you need to make a really good gun, then develop instructions to make a "good enough" version of those machines with your starting tools.
I'm still baffled morons like you think all 3D printers are capable of producing firearms. Your lack of knowledge on 3D printing techniques and materials is abysmal.
for example?
Fancy coming by this thread. Just got done with my first print. Having some bed leveling issues and idk what else.
Truly amazing how many gun parts and accessories are available right now. I have a sick feeling that will not always be the case.
Im going to start with a Glock bench block and some mag couplers, maybe move onto some Glock mags and shot shell holders. Reddit spacing.
Hopefully it doesn't stop. Regardless of that though, it is interesting how gun stuff actually manages to become harder and harder to stop from being produced. Eventually, it'll just turn into metal printing when the price lowers enough and it will well and truly be dead then.
>Eventually, it'll just turn into metal printing when the price lowers enough and it will well and truly be dead then.
Doesn't seem likely with current technology.
https://twitter.com/NaviGoBoom/status/1539325073248616448
>Eventually, it'll just turn into metal printing when the price lowers enough
It's not just a matter of price.
lmao me too.
decent result, but can be a lot better. I'm working with a resin printer, and even though detail is really nice, shit's messy af.
Thinking about printing molds for forged carbon fiber parts. I'm living in scandinavia, so I have to be a bit careful about not printing anything illegal though
Buy decent PLA as a start, the Creality material is fricking garbage, i bought one to learn and recently started using Esun, never buying Creality ever again, the print quality difference is night and day.
Also suggest you get a BLTouch and do the Jyers mod for your printer, since i bet you got an ender 3 v2 like most people do, i probably might get a second one soon.
I could not print that god damn cat until i stopped using the mysterious white filament that came with the printer.
Tighten your Z screw Black person I swear the chinks make it loose on purpose.
The coupler between the motor shaft and Z axis have two grub nuts. Tighten one on the flat of the motor, and the other into the shallow part of the acme thread.
That's why you get those weird layers. For 5-10 layers it doesn't lift enough and smears the layer under it, then it raises up enough and prints "normally"
3d printing firearms for the engineering fun of it is one thing, but some poorgay meth head 3d printing some downloaded cad files is another matter entirely.
How the frick is a meth head gonna be patient enough to 3d print anything or even afford a 3d printer when all money will be spent on meth?
you can all but 3d print the meth too, dumbass, and having the sort of drug that makes you stay up all night looking for more of it means they're taking the sort of drug that will force them to notice.
Here's a primer for buttholes here a decade late:https://www.engadget.com/2012-04-18-university-of-glasgow-scientists-print-drugs-in-3d-pave-the-way.html
You've never even been around a meth head shut the frick up. Surburban homosexuals like you are always doing this shit.
>better watch out for those meth heads
>better watch out for those inner city Black folk
>better watch out for those skinwalkers
As if you've experienced any of those things.
I've experienced all of them at the same time, i was walking around inner city Pittsburgh and got robbed by a meth addicted Black personwalker.
Meth heads are entitled to the second amendment too!
I am serious
even if you dont plan on printing any guns, download the files anyway. they could literally be removed overnight. the more people that have the files, the better.
>https://thegatalog.com/
can't recommend this enough. I downloaded Hoffman's milspec FRT and I don't think its up on any websites anymore.
I've seen it float around, but it is nice to have a copy of it.
>Hoffman's milspec FRT
What is this?
Printable AR15 receivers I have printed and tested, ranked:
1. Hoffman (sturdiest)
2. Hoffman Ubolt (sturdy and aesthetic, prints in one piece, but have to file down U bolts)
3. Anderson Hellfire (100% printable but breaks more easily)
4. Firebolt (too many parts for my taste)
Anyone else here experimented with these?
Senate is banning homemade firearms as well as private sales. 3d print guns are held back only by the best materials the printer can print.
Also you could build an AR-15 lower receiver entirely out of wood. Upper needs some metal or a very hard wood for the barrel mounting.
Hi there, OP here
you missed the glaringly obvious point about all of this, in that "you don't necessarily print the parts the gun is made of, you print the tools that make those parts out of proper materials".
Anybody got a 3D print for a AKS-74u? I'd much rather machine it from the data.
guns designed for metal parts dont work with plastic but only the once
Homemade guns are very illegal.
Totally false.
So fricking legal there is an industry built around it.
100% legal provided its not for resale
One way or another they're getting pretty slick and making casual gunsmithing a more accessible hobby is bound to lead to some interesting innovations
>see this
Now I realise the reason why I hate this.
All of these are just PCCs and PDWs that are clunky and bad in general
I'm pretty sure an intermediate cartridge FGC is in the works, though I won't make excuses for its action
There is a project called FMGC-02
STL for mag?
this isn't going to work.
>plastic boltface
>plastic which melts at 140 degrees touching the outside of the barrel
how does it even lock?
PLA to get em hooked, Nylon for when it matters.
Tilted bolt similar to the sks an FN FAL
Frick machine gun control?
Yes
Its a select fire Diy Rifle in 556 you should Check the FMGC-01 (a select fire Version of the FGC-9)
https://odysee.com/@FMGC.project:a
Seeing this makes me really think that we need to start taking more of a consideration of heat in these guns. I pondered and am still pondering on if we can have square tubing incorporated in these designs to start helping keep these guns cooler.
If you want to know more about the go to u/Subject_Ad_9188 on reddit he is responsible for the FMGC-02 project
Thanks, I have really been trying to talk about people overhauling this system so that we can have more than PCC with the FGC platform and graduate into proper rifle territory so that we don't even need to rely on AR parts.
Holy shit this is damn near exactly the sort of thing we're in need of. Frick, this is great to see.
So a bit like this ?
Check the ar upper. Using nylon makes then heat resistent enough. Ivanthe troll did 2 mags before it started melting of course the gun was PLA+.
Biden's Bane mag dumping all day baby
Yeah, but I'd rather just keep printing in PLA+ and use cheap metal to my benefit instead.
If only you knew how fun things really are.
Holy frick that's tidy
Does a design exist to convert a glock 19 into a PCC? I asked my friend who has made several guns and he said no, but that seems very unlikely.
convert how? fit inside of like the roni? or something else?
Sure. the Roni is kinda big, but adding something on (like a stock), dropping it into a chasey, or putting the slide onto something like in OP.
oh if you're that flexible you just need to have a look in the right place. your friend is talking out of his ass. fosscad used to be hot but all the places except odysee nowadays are pretty shit. gl.
there is also the possibility your friend thinks you're moronic and shouldn't be trusted with this information or he's trying to save you from doing something illegal by withholding the existence of that information from you.
Nah, he's not worried about the law, he's just legitimately on the asl so he probably just thought since there wasn't anything he thought was interesting there wasn't anything he should suggest.
*als
there are many MANY micro-roni (that's the brand name) knock-offs that you can print, and besides proper gun type prints, many of the versions designed for airsoft also could work with minimal corrective modification.
stop spying on people's porn habbits homosexual, nobody cares about porn and you can't use it as leverage nearly as well anymore. Also troony porn is less gay if you watch it with women.
Weaponizing cringe is nearly as cringey as weaponizing pedophilia and then getting caught with the federal dealer also freelancing, or mass public drug trials as wargames to take a census of obedience.
Haven't posted here in a while because jannies really let /k/ go to shit during the war. Wanted to give an update on the 3d printed slide gun I'm working on
There are still a crazy amount of issues in the design. From rough edges of plastic cutting the rubber bands to tolerance issues everywhere
For the most part it's going well though and it's incredibly compact for a 3d gun
Planning to post of video of it either firing or exploding in my hand on the 4th of July
print out a stand and fire using a string first
I love how you/you guys keep posting the development of your project. It might suck, but it is a well revived little "life update" when browsing /k/. keep it up.
That is really cool.
Awesome, looking real cyberpunk.
Is that like a vertical auto actuating harmonica gun that uses cartridges in a block with zig zags on the outside to drop and align the chambers? Like a webly-fosbery revolver but theoretically absurdly high limit on mag size?
Cool.
No just buy an 80% lower dumbass , your 3d printer doesn't use the same polymers as firearms manufacturers do for their frames and I shouldn't actually need to spell that out to you, frick
Fibreglass filled nylon filaments exist, which basically is what manufacturers use with some proprietary enhancements. Basically DuPont zytel.
Not sure if you are just a moronic newbie election tourist or a fed that was poorly trained in subversive communication.
feds mad feds mad feds mad
wtf am I looking at here ?
A 1911 heavily modified with a pistol brace, and an added sight and light.
it's called a "3011", it's essentially an ar15 lower that takes 1911 mags and has inserts that a 1911 slide runs on, on the top of it, and also a spot for an optical sight. It's fun for the 3d print guys because, the 1911 blueprints are among the earliest of all sets of blueprints for a full working firearm to be floating freely around the internet.
Wait, does it run off of AR parts?
the fire control group is lifted right from an AR
Art.
That's fricking stupid looking
your fathers dog dick looked stupid in your mother's cow c**t too, nobody needs to mention how stupid anybody or anything looks, it's only a matter of whether it works or not anyway, unless you're a genuine homosexual.
Don't have a heart attack like J Stark, Ivan
Beautiful 3011 I love the safety orange, basically a force field and no one can shoot you.
I would like to get into printing, if just to make weird shit like this.
Ramset-powered 3d-printed crossbow? Hmmm...
The Gatlatl is a fricking beast! I thought it'd be a fun toy over and above the G22 alone, but it's really impressed me. I'd gladly hunt with it.
anyone have a file for a 22lr handgun? or how about a website that has gun prints (other than gatalog/DD)?
pretty sure the buckmarque is up on the gatalog.
Just say it's to help the hohols in Ukraine and you don't have to worry about shit.
Rent free
i printed a g19 but i cant rack the slide while the trigger is forward, anyone have an idea what this is? cant get this thing to run correctlty.
sounds like you gave a bent trigger bar or something.
when i look through the gap between the slide and frame that surface 1 seems to be whats in the way
fmda dd19.2 and used a psa dagger slide, the trippy stipple one
when the trigger is forward or reset it only moves like 3-5mm back, if i use all my force i can force it to rack, it seems to clear something blocking it and then proceeds.
i bought a g19 gen3 kit with locking block like the guide says
there is nothing i can manipulate for it to rack easier, gonna check those area you showed
OK I ACTUALLY GOT IT TO WORK
changed trigger bar to a spare i had off of
recommednation and now it slides no issues
Fantastic, go nuts with the snap caps and cycling and running the shit out of that thing before you go shooting it. Little mistakes, big consequences, nobody wants to be the c**t who lost a finger or an eye to a homemade plastic Glock OOB.
this is my first build:
https://odysee.com/@delta_mongoose:0/3D_22:0
Nice.
nice upload dude.
A thread of homosexual intent
well thanks for showing up and turning it into one.
It's not gay to give your friend a lil peck on the cheek when saying good night.
yes, you and crumbs are truly fricking homosexuals
Aren't they banning 3d printing now?
Are they?
I know there's some state level stuff, but I don't think there's any federal level regulation. At least not at the moment.
Not really. Also with the recent bruen decision, unlikely it'll hit the US ever even if other places go after it.
Pakistan had a ban on them, and some eurocuck countries seem to do it too, but that probably will end up just asking you to have a license as usual.
Will be too hard to enforce in western countries, though Canada and yhe UK will probably try.
Some weird choices were made in this "carbine" design. Why did you choose to move the pistol grip behind the magazine? It just adds unnecessary length. Was the idea to use AR15 FCG parts and pistol grip with a 1911 slide? Fricking weird.
if you're so smart go and design it. maybe you'll learn something.
I know more than you.
no you dont
If you did you wouldn't be asking such dumb questions.
It's a 3011, go look it up if you want to know why it is the way that it is, because it's neat.
More detail.
What frame did you print? Be specific, there are a frickload.
You can't rack it, is it totally locked up won't move a millimeter, or is it making it back a little? 5mm? 1/2 inch? 80% of the way?
Check your locking block. You bought a locking block right? Make god damned sure it's the right one for your frame, read the readme, use the one the readme says to use.
Can you rack it while manipulating the takedown lever?
Make sure your takedown lever is seated fully and correctly. What gen takedown spring/lever? The top of that spring should be below the face of the rail block. Make sure your shit is cleaned up and you've got no leftover support material fricking with you. If your settings aren't on point and the slot is too tight, it may not seat, and that can prevent the slide from moving.
Try pushing down on the barrel lug while racking, if that works then your locking block probably isn't seated right. (Or it's the wrong one entirely.)
Check that your trigger bar isn't fouling horribly on anything, look for where it might be fricking things up. It's unlikely for it to be so bent that it causes this, but it can happen. If it's a little bent to begin with, it's not that hard to accidently full send it into a twisted useless piece of shit.
slightly related but did those guys making the printable AUG receiver publish their stuff?
bump
?
bump
bump
bump
bump
Not yet, I reckon it'll be a while as I doubt many people are involved in the beta given the upfront costs involved in actually working on a receiver compared to other works.
Why would the receiver be that expensive? You'd think the bigger issue would be getting uppers.
lookup the price of bolts, barrels and FCGs for the AUG and compare them to the works people have been posting on Oddysee, few people are interested in 3d printing a receiver for a platform that's got that high of an entry price tag unfortunately. Not to mention that gives them all the more reason to be extra careful in trying to get their shit down pat the first try as to not disappoint those who dropped a good chunk of change in order to participate or be on the ground floor when the file drops. These people have reputations in the community and a standard to uphold and with something like the Steyr AUG they can't exactly release something like a smooth shitty glock 19 frame that at least works but feels like shit and has to be improved by other members because there's just not enough players in the game so to speak for that to be viable. Let them take their time and in the meantime grab parts while you can before the storm of scalpers come to ruin your dreams.
got links to the dudes who are working on it?
i find it kind of hilarious people put these 'braces' on their guns, as if feds couldn't frick them for an sbr because there's a little strap on their stock. If they just put a regular stock on there's a very slim chance anything would change
Yeah that is not a brace.
That is a whole gun.
It's an alternative frame for the 1911. It's not a chassis, not an addon, that is the firearm you're looking at.
what's the point of making your gun longer and worse in basically every way
you're too moronic to even begin understanding.
I saw a guy playing with one of the glock frames last time I was at the range and I couldn't figure it out then either
then what's with the strap, other then trying to make it legally defensible as a 'pistol brace'? I don't know the story behind that gun, maybe he did the SBR paperwork
Totally misunderstood at first, yeah the pistol brace shit is fricking stupid. Braces are just stocks by another name so folks can avoid tax stamps.
I don't mind, I'll gladly save the money and have a skinny stock over a real one. It's not like it's for helping someone handle the recoil of their 9mm, it's just for stability. It genuinely is satisfying to shoot these "PDW" style pistols.
My 8.5" AR-9 is a delight, and the brace makes it more fun to shoot, because I use it as a stock, like everyone does.
I think it's bigger than ever because of folks trying to save money. You slap together a parts kit 3D printed Glonk&Wesson for $80, you really want to drop cash on a tax stamp to legally stick it in a chassis? Frick naw, you're building a discount Scorpion Evo, not fricking around with no ATF or paperwork, not voluntarily meeting the local sheriff who's arrested them numerous times before, they just want cheap and easy and anything that goes against that is worth fighting.
Yeah I have no problem with braces as a loophole. Its just that under actual legal scrutiny I don't think any of these home-made 'braces' would actually hold up. They don't even resemble designs approved by the ATF, its just that nobody's actually going to be charged for an SBR because their home isn't going to be searched, and as much as people would have you believe, feds don't bust people for posting some random image of an illegal gun on PrepHole. However, if they were arrested for something else, and the cops found their 'totally just a pistol guise :D', it is absolutely feasible they'd get the book thrown at them.
>PISTOL IT'S A PISTOL JUST LOOK AT THE PISTOL YOU CAN'T EVEN SHOULDER THAT PISTOL IT'S SO PISTOL
I will shoulder anons massive girth
Nice
Any fgc9 makers can give me a link on where to get the steel rods? The manuals aren't very specific on which one to get, only says "carbon steel, not stainless". Does anyone know the "right grade" or SAE it should have?
For links, hopefully from chinkexpress as a first option, but ebay or amazon are also ok.
any help with these? i keep browsing but i can't fricking find any, just stainless tool steel garbage as usual.
Amazon
Be more specific, I know I can find them, which "wordphrase" should I use?
I don't recall off the top of my head.
Still frickin around with this ho. Bed leveling got easier once I cured my down syndrome. Printed a mag coupler that is ngl kinda shitty.
What should I print?
unless there's some frickup that you hid that print looks perfectly fine. level and layers lookin good.
oh Im a fricking autist. disregard.
Yeah just the fit is shitty. How staggered are the mags supposed to be? When fricking with the thing it seems like the other mag gets in the way of the mag release/ ejection port.
Honestly the print itself I'm digging for day 2.
Biden's Bane Upper, Mono-Poly Lower, HT-FRT
Let's say for example that you had a low functioning autistic brother with real alcohol issues.
How would you explain that string of words to him knowing that the results would be posted on here while he was fricking shit faced?
Also does anyone know if PLA is safe to put up your ass? Asking for a friend. Reddit spacing
I wouldn't put PLA up my ass, anything that off-gasses is generally bad
also sharp edges bad
Anon, you used the 3d print you printed to create a mold that you cast with body safe silicine, the result can go up your ass without any issues
Silicone*
Just put a condom on it and it's fine, it's pretty hard though
Let's work backwards. PLA is not body safe or food safe. Commercially, virgin PLA can actually be used to create dissolving stiches, it's not dangerous to expose yourself to it in small amounts. However, the stuff used for 3D printing has plenty of carcinogenic shit in it.
This fella is right, 3D printed PLA will continue to let off nastiness almost indefinitely. Even when it's totally stable, it's a hard plastic and will wear like other hard materials, leaving dust and fine particles.
Don't ever put PLA inside your body. You can use it for casting though.
This is correct. Seriously, design whatever, print a mold or print a positive and cast a mold, either way. You want very, very soft silicone for sex toys. Female toys you can push further, but the silicone used is softer than some folks realize. Male sex toys, you want to stick your dick in it, even softer, some of the softest silicone that exists is used for pocket-pussies, we're talking 10D-15D, that's soft as frick.
There already exists PLA that is safe for medical use, so the same could be used for food.
Also you still have a ton of beverages on BPA plastics anyways, so you are basically using PLA related materials.
The filament that comes out of your home 3D printer is not medical grade, doesn't matter what filament you buy, you're not a medical facility and you don't have precision extrusion control like a commercial injection molding operation.
Also, you shouldn't shove plastic drink bottles up your butthole either.
Clearly only (You) are the one doing that since you keep mentioning to shove things up someone's ass, and its obviously your own, you collosal homosexual.
Medical PLA exists, but since you like to shove things up your ass so much, you clearly fricked your brain with toxins and cant even do basic research.
>Also does anyone know if PLA is safe to put up your ass?
It is literally the question he asked.
If you think you can stick medical grade PLA into your Ender 3 and get a medical grade product out the other side, you're a fricking moron, and the medical community will laugh your septic ass out the ER.
Just get something food grade and it is fine. is not like you are going to permanently instal a dildo on you ass. And if you are going to the pain of making something custom made make a mold and cast it in whatever shape and foodsafe material that you want.
Why don't you show us this medical PLA?
Go ahead, link to a roll of it, I'll wait.
Mitsubishi, the world leader in medical 3D printing materials for FFF/FDM printers, doesn't sell any PLA for medical purposes, weird.
Surely DSM Arnitel has a PLA offering then! Nope, no they don't.
You don't know what you're talking about homosexual. Go back to scrolling hackaday in the back row of your 6th grade classroom.
Waiting for a link to antibacterial stuff and the claim that it's "medical" even though the manufacturers say it's not suitable for prolonged contact with the skin, and shouldn't be used where it may contact sensitive areas.
Funny right? How the only PLA filament you'll find that claims to be for the medical industry specifically tells you not to touch your balls with it.
Let's break it down!
>Biden's Bane Upper, Mono-Poly Lower, HT-FRT
The Biden's Bane Upper is a full-sized carbine or rifle upper for the AR-15 platform. It's quite new. It's currently the only proven and tested design for a rifle-caliber AR upper receiver. There are numerous other receivers that you can print, but they're almost entirely for rimfire and pistol calibers. The Biden's Bane will happily accept mag-dumps of 77gr all day assuming you build it right.
The Mono-Poly is a lower receiver for the AR-15. There are many lower receiver designs available, plenty that will handle even large rifle calibers, folks print AR-10 lowers without concern. The UBAR and Hoffman's Super Lower are popular choices right now. The Mono-poly is a fantastic design, it more closely resembles the functionality and design of an early M16. It's mostly an aesthetic thing, but it is a very good lower design. If you have a large format printer (CR-10 or great), you can print it as a monolithic lower receiver, hence the name Mono-poly, monolithic polymer receiver.
The HT-FRT is one of many "Forced Reset Trigger" designs, currently riding in a very rough gray area of the law, they allow for semi-automatic fire at rates similar to full-auto. They're legal by technicality, and likely won't be forever, expect them to go the way of bump stocks. That said, they're currently available! Off the shelf units are fricking overpriced as hell. The "Rare-Breed FRT-15" is likely the most notable commercial example, they ask $380 for a sub-par trigger with the bonus of full-auto-like firing. Well frick that, print one. There are plenty of options. There are even ones that are meant to be combined with a mil-spec trigger group.
The HT-FRT is just a "notable" one, it's really not the best, but it did earn them a cease-and-desist from Rare-Breed those cucks.
Get on the israelitetube and search for "Forced Reset Trigger" if you want to see the effect.
Basically I'm recommending you build a <$250 AR-15.
Thanks Fren!!!
I wouldn't mind talking about 3d printing in a weapons context. Started with nerfshit just for fun with friends then made a UBAR that currently sits as a trophy on my dresser. If I ever get around to it I'll build a rifle onto it instead of swapping my regular lower for it when I'm feeling a little extra 'tism, it's survived ~100 rounds already
Fun places for RSS Readers:
https://odysee.com/$/rss/@blacklotuscoalition:3
https://odysee.com/$/rss/@DigitalNimbusLabs:b
https://odysee.com/$/rss/@AG_Off_Grid:6
https://odysee.com/$/rss/@MiddletonMade:1
https://odysee.com/$/rss/@PlasticBlasters:6
https://odysee.com/$/rss/@BooliganCustomGunworks:f [Parts]
https://odysee.com/$/rss/@awcy_arms:a [Videos]
https://odysee.com/$/rss/@AreWeCoolYet:7 [Parts]
https://odysee.com/$/rss/@v2:d [Glock art]
https://odysee.com/$/rss/@Harvey.Knoll.Industries:5 [Simple untested launcher]
https://odysee.com/$/rss/@TheRustyMosin:c [Star Wars =TheRustE11]
# Glowies
https://publicintelligence.net/feed/
https://publicintelligence.net/dhs-fbi-nctc-privately-made-firearms/ "First Responder Awareness of Privately Made Firearms..."
https://odysee.com/$/rss/@OceanJuice:5
https://odysee.com/$/rss/@sofareader:9 [If glock = P90]
https://odysee.com/$/rss/@INMC:d [Airguns and how they sound 🙂 ]
Atlas Arms (DIY Ammo)
https://odysee.com/$/rss/@chairmanwon:a
https://odysee.com/$/rss/@FMGC.project:a [IMPORTANT]
https://odysee.com/$/rss/@Suburban:1 [Grips]
https://odysee.com/$/rss/@p80ralph:0
The Gatelog not shown as website has it all.
Weird
Fun places for RSS Readers:
https://odysee.com/$/rss/@blacklotuscoalition:3
https://odysee.com/$/rss/@DigitalNimbusLabs:b
https://odysee.com/$/rss/@AG_Off_Grid:6
https://odysee.com/$/rss/@MiddletonMade:1
https://odysee.com/$/rss/@PlasticBlasters:6
https://odysee.com/$/rss/@BooliganCustomGunworks:f [Parts]
https://odysee.com/$/rss/@awcy_arms:a [Videos]
https://odysee.com/$/rss/@AreWeCoolYet:7 [Parts]
https://odysee.com/$/rss/@v2:d [Glock art]
https://odysee.com/$/rss/@Harvey.Knoll.Industries:5 [Simple untested launcher]
https://odysee.com/$/rss/@TheRustyMosin:c [Star Wars =TheRustE11]
https://odysee.com/$/rss/@OceanJuice:5
https://odysee.com/$/rss/@sofareader:9 [If glock = P90]
https://odysee.com/$/rss/@INMC:d [Airguns and how they sound 🙂 ]
Atlas Arms (DIY Ammo)
https://odysee.com/$/rss/@chairmanwon:a
https://odysee.com/$/rss/@FMGC.project:a [IMPORTANT]
https://odysee.com/$/rss/@Suburban:1 [Grips]
https://odysee.com/$/rss/@p80ralph:0
The Gatelog not shown as website has it all.
# Glowies
https://publicintelligence.net/feed/
https://publicintelligence.net/dhs-fbi-nctc-privately-made-firearms/ "First Responder Awareness of Privately Made Firearms..."
# Note
Formatting error so reposted in proper form.
Oh that's fun, I feel like there are a few more worth looking at while we're at it.
Odysee.com:
>1pew2pew
>3D_Arms (3DARMS)
>3D_Arms (3D Arms Files)
>3DFreedom
>3DPrint
>3DPrintFreedom
>AEGlocks_BETA
>AltivoloEngineering
>AreWeCoolYet
>Bigblockdoug
>BIGBUTTERSCHOTCH3855
>blacklotuscoalition
>BONKPEWPEWS
>BooliganCustomGunworks
>Br0letariat
>BrewPewPew
>BrokenBullets
>browner_77
>c0ld_d8rk_h8nd
>catboii69
>chairmanwon
>CheapAsFawkArmory
>CivilizedDefense
>coinstar
>CTRLPew
>DaikonDefense
>Det_disp_Accesories
>Deterrence-Dispensed
>Deterence-Dispensed-Archive
>Deterrence-Dispensed-Media
>Dianexis
>DigitalNimbusLabs
>dootdefense
>DrunkRebel
>EbenezerMudgett
>Edgan_remixes
>FecalDisco
>FFFTech
>foobadoo
>freeman1337-GunCAD-Mirror
>GunJeevus
>gunsister
>GuS
>hoffmantactical
>hotsauce
>INMC
>internetpizza
>iprintshit
>Ivan's_CAD_Streams
Now the other half:
>IvanPrintsGuns
>kaapa_the_restless
>killo
>Klaviermeister
>LibertyMinded
>MacnayArms
>MaxRet
>Methematics
>MiddletonMade
>Mprtech2
>Mr_Snow_Files
>mr.snow.makes
>mrdurden655321
>MrJMeZZ
>nameisnight
>nate
>NegativeION
>NotThatTimmyHicks
>p80ralph
>Plasti_Pews
>PolymerToad
>Print2A
>PrintGunz
>printshootrepeat
>PunkJuggle
>Pushin_P.L.A.
>ReigningBrass
>renegadeguns
>RKSpookware
>SangreDeTruchas
>scul
>Sloth2adesigns
>spaceboundtactical
>Stubbs
>swolebro
>Tavelkyosoba
>TheGatalog-Accessories
>TheGatalog-Guides_Tutorials
>TheGatalog-HybridDesigns
>TheGatalog-PrintableFramesReceivers
>TheGatalog-PrintableMagazines
>TheGatalog-ReferenceModels
>TheGatalog-Suppressors
>thekingisbackboys
>TheRustyMosin
>TriptychGunWork
>voidarmory3d
>WFGCIVideos
>WTF-9
thanks
that site/application makes it annoying as frick to find what you're looking for.
I'm trying to get a torrent up for everything
ABSOLUTELY BASED
Made a 3d printed 41mm firework launcher. Would anyone be interested in the files if I figured out how to upload them?
Can use a grip or be slid onto an underbarrel pic rail.
Uses only 4 non-3d-printed parts
Nice.
What exactly are those parts, and that sounds just fine if it works.
Upload the STL and Step files to Odysee.
Those Step files are important, gonna need to modify it for 37mm rounds.
3d printing is cool, but the community is full of homosexuals and groomers
So's /k/, what's your point?
Bump
bump
can 3D printers print magazines that are durable and long lasting? for lets say an ak 74?
currently we are limited by imagination
I dont think ive seen one actually. There is an ar mag called . . . the waffle mag or someshit like that I think.
Depends on your definition of durable and long lasting, but the short answer is yes.
Yes, waffle mags are a thing and are seemingly very reliable.
Yes on all counts.
A good printed mag can be shockingly durable, depending on the mag, spring, filament, your print settings, local weather . . . They can be good, truly, but they can be shit too.
The AR waffle mags are pretty damn good, not perfect, but they do work. Ivan's is good too. (they are not the same, don't know why some people think they are)
The Everytown .22lr mags are really fricking impressive given what a b***h rimfire mags can be.
Practically every popular 9mm mag can be printed. Glock mags, most S&W, Taurus, Sig Sauer, Sten, Uzi, Grease Gun, the list goes on. Glock mags get the attention.
Menendez mags are good, newer DMB mags are better, they're stronger and closer to OEM mags. Get 'em anywhere from 7rds up to 100rd stacks if your printer can fit 'em.
They're very cost-effective. I have stacks of 25rd Glonk mags, they cost <$1 to print, so I keep extras. If I drop and break one, frick it so long as the spring doesn't frick off.
They're good for thousands of rounds no problemo, but they won't take a fall if they're loaded. I print in cheap bottom-tier PLA+.
Springs are cheap, really damn good ones are $3/ea. Used to be tons of Chinese ones starting at less than $1, but they're harder to find anymore. You can make your own, there are printable jigs and tools to help. If you're buying music wire on the cheap, you can wrap springs for <$1.
DMB drum mags available, you can have a bad ass versatile drum that'll fit a shitload of different platforms, run you <$10USD ea if you're building 2 or 3 at a time. $30 for 3 9mm drums is a pretty good fricking deal.
There are AK mags, 2 old designs floating around. They suck. It's an AK thing. They murder magazines, they do, it's their nature. It's not a problem with steel mags, it's not a problem with really fricking good polymer mags, but printed AK mags just do not hold up. They've been around for awhile, but you won't see them much, you'll be lucky to get through 10rds twice with PLA+.
You should know that AKs also murder aluminum mags as well, even though fiber glass reinforced plastics hold up fine (looking at you, AC unity)
Where do I find all these magazine designs? I've never heard of almost all of them.
search via names
All of this shit get released in the same place, Odysee.
Finding anything on Odysee is a joke, so that means finding and following developers.
DEFCAD is a homosexual honeypot that exists to pay the legal fees of a pedophile, and nothing on there is of any interest. If it's there, it's either a) Free Elsewhere, b) Untested Hot Garbage, or c) Stolen.
DEFCAD is a useless joke, as evidenced by all of their biggest and most prominent developers all leaving and releasing their shit on Odysee, because you can't spread the signal if you put it behind a paywall.
Only place you'll find a big pile of developers other than chatrooms is on Reddit, fosscad.
ModeratorGage made a decent list at one point, SangreDeTruchas stuck it here https://pastebin.com/r6ySCiKk
It's a good starting point, but it's far from everything out there.
Search for that shit on Odysee, follow the person, enjoy your giant stream of gun parts.
There is a shit load.
If you just want to be pointed to mags, you'll find an absolute pile across these channels:
https://odysee.com/@TheGatalog-PrintableMagazines
https://odysee.com/@Tavelkyosoba
https://odysee.com/@SangreDeTruchas
https://odysee.com/@AreWeCoolYet
printed an ak mag, will have to order springs or take some out of other mag before testing though
probably won't last as long as a regular mag, wear resistance would probably depend the most of on printer settings itself
Feed lips are an almost universal problem for everything not originally designed with a plastic or thick magazine (Glock for example) but besides that if printed correctly (print lines vertically not horizontally) they are very reliable.
found the fed
wtf is that cursed contraption
3011
ITT:
>wahh you can't say my shit is ugly or you're noguns
>shilling for 3d guns like it's their job
>homosexuals talking shit about 3d but not knowing what they're talking about
also I forgot
>me looking for huge wieners to swallow
bump
bump
Nice
i have an ender 3 with a glass bed. ever since i switch to the glass bed, my print adhesion is insanely high. prints are just cemented to the glass and nothing short of sticking it in the freezer for an hour will help. what am i doing wrong? too high of a bed temp? im using pla at 80 degrees F.
i switched to a painters tape base (which has worked so far) but i woke up to a 14 hour print lifting from the bed this morning.
Reduce bed temp to below the glass transition temp of PLA (45-50 degrees C). If that fails, use hair spray.
i meant to say C not F*
thank you for the reply. this is only my third print with the glass bed and im still figuring it out. anyway, attempt #2 is on the way
when they get too sticky, i preheat the bed on "ABS" material, which is around 70C, after 2 mins reaching that temp, i take it off with gloves and put on fridge for 5 mins, then it comes out most of the time with no issue.
Now if you wanna skip all this, you could get those "fleximats" that go over the bed to remove the prints easier, but you have to replace em after some time, but they arent expensive
Well shit
What's the cheapest, reliable 9mm pistol I could make that would be effective for CC and not look autistic
Everytime I look up parts kits, they're even more costly than just purchasing the gun I'm looking to print
S&W Bodyguard or M&P if you can find them.
This is a fricking perfect answer.
If that's not *cough* Cost-Effective enough for you, the G2C and G3C are good cheap.
The FOSS-Cannon is probably more resilient than the OEM frames, and it's definitely better looking.
The trigger is horrid, pseudo-double-action-safety-airline-miles not for women and children, blech.
Put it together right, it's an extremely reliable and entertaining piece, more so than I'm willing to credit Taurus with.
Parts kits are cheap, you can get away for under $150 if you've got any patience, just watch out for the rusty ones Jamal stored in the jenkem tank between drive-bys.
Bigger, if you're into Barely Concealed Carry, the S&W SD9/SD40 is top-tier good cheap, reliable trash, Glonk&Wesson best anime crossover, buy spring kit on eBay for price of latte to take the wet noodle out the the thousand-yard trigger and enjoy your $120 Not-A-Glock 19.
Hey everyone, don't print Hi-Points, they're bad cheap. Tons of problems with the Hi-Point models, the original Hi-Point design is barely vaguely safe, once you 3D print it you can kiss that tiny margin goodbye. They like to fire if you touch the fricking slide. Saw a reddit post recently of a motherfricker who ND'd his 3D printer with a printed Hi-Point. Tons of reports of issues with these frickers, both the 9mm and the bigger JHP/JCPenny/whatever the bigger ones are, frick.
>Hey everyone, don't print Hi-Points
FUK U IM PRINTN ONE RN
SD9/40 with Glonk/Menendez Mag is basically perfect, just get a good SD trigger and you probably get the best 3d print handgun atm.
So true it hurts.
Do MDX build kits work with FMDA printed lowers?
>year 2060 the burger wars begin
>anon fires his plastic happy meal gun at me
>misses wildly and runs for cover
>panting like crazy he sees a twinkie nearby
>grabs it and falls into a spiked pit
>walk by and collect his ammo while he screams
>BOOBY TRAPS ARE A CRIME I'M CALLING THE FEDS ON YOU
Some of you homosexuals probably need this.
I use your revised mags. thanks.
Not mine, I just save everything remotely useful. That same homie is doing a 702 plinkster and I'm pissing myself, I have 3 and I want to remake them in plastic because FRICK REALITY
That thing, it's that thing. I want it, I want a pile of them, I want to stack them like lincoln logs and sleep on top of the pile.
WHATS IN THE BOX!?
I want more of this, cheap fricking shit 22 rifles.
Kids need an option for a $50 .22 to frick squirrels with.
Gets my dick hard
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
pause for a second gotta get my salad tossed by a lab
Can we all be BigC now? I don't have a dog to frick currently, fricked the last one to death.
Any designs based off these cmmg kits? They seem perfect for a printed reciever.
Yeah, check out the Tubee-22.
I adore Booligan's SpaceGat 22.
Look at this fricking thing.
ouch my balls
Cummypaws with the constant drama creation eh. Thanks for the bumps though.