Upcoming bullpup lower conversion for the BRN-180 and the PSA JAKL
https://aandk.llc/akb-23-brn180/
$700, $785 with the SA-80 handguard.
I want.
Upcoming bullpup lower conversion for the BRN-180 and the PSA JAKL
https://aandk.llc/akb-23-brn180/
$700, $785 with the SA-80 handguard.
I want.
tbh it would look great as a pseudo l85a3 slap some fde with green furniture on it, it would look great id even pay extra for hk 416 iron sights to put them on this
What do you think of the BRN-180? I thought about getting one.
>We have an L85 at home.
Yeah and it's AWESOME. Apparently they're leading full into the SA-80-alike angle and are making a comma-shaped charging handle to go on the BRN-180.
LMAAAAO AT LEFTIES HORTHEY GONNA COPE
Charging handle looks like it's ready to eat an ear.
Seriously. If they're going to clone it, at least go the way of Tommybuilt and make it as close to 1:1 as possible. Anything else is a cope.
They’re not cloning it, they’re making something vaguely of the same shape but better
No one wants a real fricking L85.
Why not? It's the best service rifle currently in service.
So good the royal marines don’t use it and use an AR
Special forces never use service rifles.
Unless it's an american service rifle, or a german made copy of an american one
Royal Marines aren't special forces...
You're both moronic. RM uses L85s and always has done. They're being replaced piecemeal because they're wearing out and nobody is going to make more of them.
>both
We are three different anons.
You're all moronic then.
They can buy C8s through existing procurement channels. It would cost more to get PSAs.
>They're being replaced piecemeal because they're wearing out and nobody is going to make more of them.
They should buy PSA's lol
I do, not that I think it's a good rifle I just like owning and shooting as many guns as possible.
>Option that costs no less than $4k each
>or the one that costs less than $1.5k
>inb4 hurr you're poor
If you resort to the poor argument, post your most expensive gun so I can shit on you with mine
this, it looks repulsive. the only reason why it would have any significance is to be a clone of the L85, if it fails at that it fails at the only reason why it exists,
cope
Shut up gay no one cares, we get to spend like $750 - $1250 for a gun that was previously unobtainable. And if you don’t like it you just slap the upper back on a regular lower and go about your day.
>spending 750 on a shit rifle pretending to be a shittier rifle
yeah and this turd doesn't come close to what it's larping as, so it's still unobtainable. stay mad and seethe more
Right sorry, nothing can be good or fun except a Daniel Defense AR (TM) with a matching $2000 donation to Israel
lmao thats some hard core projection there. literally the only reason why this turd was posted was because ZOMG ITZ A L85 AAAAAAAA, there are plenty of other bullpups on the market, but the only reason why this caught your eye was because of the L85 look, which it fails at. no matter how you justify it it's shit
Yeah it looks like a gun that I would never buy if I had the chance. But i like collecting standard infantry rifles of countries. So I’ll buy one. And I’ll enjoy myself. And there’s nothing you can do about it
>But i like collecting standard infantry rifles of countries
then why the frick does this one tick the box? it's not an L85 and no it doesn't come close. you sound like a guy dating a troony and justifying because it kinda looks like a woman
It’s close enough for me to have fun. And I’ll have fun
don't forget he needs to dilate before use annon
It’s more of a L85 then any British person will ever own
that's not the high bar or much of the flex you think it is
I’m just trying to guess what this shitter is. b***hing and moaning what other people do, sounds like a archetypical British loser and exactly the type we fricking shot
or it's a guy that doesn't get what so special about a pretend L85
>It’s more of a L85 then any person will ever own
FTFY
You literally can not buy one.
There's a handful of L98A1 Cadet GP rifles in private hands in Britain, plus a very small number of the commerical production L85A1s held by some Section 5 certificate holders. As the L98A1 is essentially a RSAF Enfield built L85 without a gas system and given a straight pull mechanism, I'd say it counts more.
That said, basically as a fun project, sure I can see the point. But you'd be better off doing a replica. Sure, as a rifle, this is better but people don't want these sort of guns because of their performance, they want to own rifles that they can't normally own.
>people don't want these sort of guns because of their performance
Do you have a single fact to back that up?
There's already plenty of good bullpup rifles available on the American market, and even if you explicitly want an AR-18 action bullpup, there's several that already exist. No body who wants a rifle purely for function or target or sport or such would want explictly this or an L85 replica when there's already rifles out there that do the exact same thing. This is for aesthetic and collectors.
Also I'm not saying it's a bad thing to have a rifle that appeals to that market, but if you are appealing to it, why not go all in?
The same reason the MOD is doing piecemeal replacements with AR pattern rifles as L85s get clapped out and NATO farts around with deciding to ditch 5.56, it's really fricking expensive to make these things unless you go all in with a big production run.
>other guns exist
>therefore nobody will want this one unless it's an L85 clone
yeah
This “shit rifle” then just becomes a bullpup that isn’t a Keltec, made by israelites, or made by the people who would then discontinue the rifle several years later (desert tech). Or made by people who donated for gun grabbers (Springfield)
While using a system that’s proven to be excellent so far. It’ll be funny if PSA accidentally invents one of the best bullpups. The cherry on top will be if the .308 JAKL will get the same treatment and mog the desert tech. 5.56 bullpups are neat and all but .308 is the far wider usage of the platform. Either way, sooner or later all will have to submit to Total Palmetto Victory
Just to make it clear this is not the PSA bullpup, its am independent development and seemingly primarily for the BRN 180 but will work with the JAKL
Palmetto has their own bullpup jakl project, it was a no brainer if they had a working buffer less AR upper, doesn’t look at cool or fleshed out
Sucks ass that I’m in a AWB state that bans bullpups for just being a bullpup
I’m going to rape you to death you fricking homosexual
Cope for what? Not having the shittiest service rifle ever designed? Cope for not wanting parts commonality with already commercially available platforms (BRN/JAKL)? Cope with not dropping 3 grand + on some Tommy built bullshit
Clone these nuts
YWNBAL85
And I’m glad
we both know the only reason why you are gay for this thing is because its larping as a L85, frick off you are not fooling anyone
L85 looks cool, nothing else about it is, plus you don’t even need it to be L85 clone as the Jakl version looks like a bullpup scar and you don’t need to use the faux L85 handguards at all, it’ll be a free float mlok rail.
Frick it, make it look like a Halo AR or the BR
Halo BR skin would be very cool
These cope clones are getting really embarrassing.
I know UGH not enough gucci'd up AR's
I'm trans btw, not sure if that matters
Can you people go one day without mentioning trannies out of nowhere
everyone laugh at this idiot.
he does not understand.
no I do not understand you morons' obsession with shoehorning trannies into every discussion, which is ironically what the trannoids themselves do all the time.
>no I do not understand you morons' obsession with shoehorning homosexuals into every discussion, which is ironically what the homos themselves do all the time.
>"i-if you just stop acknowledging them and their behavior, they'll just go away!"
>t. anon circa 1995
How does constantly bringing them up in totally unrelated threads help? What can you say that hasn't been said by a million other anons? This is literally the only website where it's impossible to go a day without some kind of mention of trannies, it's deranged obsessive behavior
If you could refer to
it'll save us both some time lol
Except it’ll be better than the real one since it’s a AR lower and BRN or Jakl upper
>everything has to be a cloooone
>if it's not a clooooone it's worthless
>if it's not a epic hypebeast gbrs forward observation superior defense noveske AR chambered in .300blk with a WHISPER PICKLE it's heckin useless
>aaaaahhhhhh I'm cloooooning
shut up you absolute Black person
fun guns can exist, it having l85 parts on it is just to look vaguely like it
>l85a4
Does it work with the upcoming .308 jakl?
No, wrong lower size. If this works out I don’t see why they can’t just make a AR10 version
I have a BRN180 and I would be concerned about that reciprocating charging handled moved back so close to the face.
Just don't be wrong handed
honestly I do not care if it's garbage
it needs to be done
Yugo make me bust
Pretty neat looking for the price, that’s a big billet receiver.
They say some parts are nylon printed, like the magwell. I presume this isnt shit they're making on their Ender 3. Anyone have experience with parts made this way?
looks like HP MJF, very close to injection molded quality and durable but high per part cost.
Cool, thanks.
All they've got to do is get a mock SA80 carry handle and front sight and we're set.
>have to choose between owning a Scar At Home or an L85 At Home
They ain't making this easy.
how is an yet another AR-18 clone a SCAR at Home?
308 Jakl scratches off enough boxes.
This isn't the PSA bullpup, that one is actually way uglier.
A&K representative here if you have any questions.
how long have you been gay?
4 u
Shooting for batch in March
Hair heavier then milspec AR, good break and reset, leagues better then most bullpups. Have a light 3ish lb 2 stage as option.
Rounded l85 “inspired” triggerguard and charging handle.
Bizon when?
Is he the same guy that's trying to reverse engineer the Bizon? I haven't seen an update in such a long time that I don't even recall his Instagram alias anymore.
No not chitin.
It’s neat I like the guide rod system, after 50rd break-in no issues with any I’ve used.
is that your preferred charging handle with this setup?
any plans for something lefty friendly? this looks very cool ;_;
It would have to be a left ejecting JAKL or BRN180, which dont exist. Maybe theres some other bufferless upper that has a left ejecting version? Sorry, anon ;_;
If you get a minute you know what would be nice?
Checked
When's it being released
How's the trigger? Does it attach to the uppers handguard in any way? Plans for future SA-80 parts? (I saw an early tester say the comma charging handle is planned)
be honest did you make the thread?
Nope I'm just awestruck by the thing and really liked the GB faction in Project Reality
>I'm just awestruck - that I made this thread.
No actually, was pointed to it by a friend.
Glad you’re interested
Can you tell us who tongues your anus?
Zasta?
Will it work with an FM-15 upper?
couldn't you make the bottom of the lower a straight line from the stock to the grip with a printed piece or something? it's more or less the thing that sticks out the most on it
My god, it’s so fricking stupid
I’ll take two
>american hillbillies design a better L85 in like three years than England could in 30
> I would like something vaguely similar to the L85 look but use a off the shelf bufferless AR-15 style upper
> NOOOOO you must buy some overpriced boutique bullshit that 1. Doesn’t exist 2. Clones a piece of shit
>l85 is just a AR-180 in a bullpup chassis
>faux l85 is just an AR-180 in a bullpup chassis
I honestly don’t hate it
it is an inevitably. like everything turning to crabs. someone has to do it but the ar 180 will always bullpup.
What's the OAL? I want to see 16" with an 8.5" barrel.
I think it looks better than original L85
Those mloc rails behind the handguard are perfect for little charms.
Letting homosexuals into the firearms community was a mistake
It's not the firearms community anymore, it's 95% cod customisation homosexuals
Yeah, I'm sure kids' obsession with guntubers doesn't help either. Lots of tards who think they're experts because a talking head told them what to think about a gun
Then why did you come?
I don't like how the trigger guard looks for some reason tbh
L85 A1-3 was always aesthetic, this is cum worthy if I can actually buy one.
Ugly
reddit spacing also bullpoops are gay hope your shit fails
Post guns
Neat
That is certainly one of the guns of all time.
>KAK makes this in the meantime
Yeah but that'll blow the bayonet off.
God I want that stupid bayonet
It's not stupid if it works, and those things work.
Hell I'm not even sold on the rifle but I want a few of those flash hiders so I can slap a bayonet on any free-float 5.56.
True, I had one of those years ago
A perfect clone would be amazing but it’s not going to happen endless you dump a ton of capital in.
King
It’s custom, but I’m totally on board with making a clone 1913 rail that fits down the line.
It's simultaneously too close and not close enough to satisfy my autism. I have to keep faith for the "real" one that someone is supposedly working on.
I’ll buy one. I have always loved the appearance of the L85, and if this is what I have to resort to get one, so be it.
Even if it's not too close, it plain just looks good, better than most other conversions for sure. The handguard bridges the gap between the lower and upper and other versions without it look much worse.
This is the only BRN-180 or derivative I’ve ever paid any attention to at all, but it does look very good on its own.
What’s the handguard pattern? Any chance of being able to slap an L85A3 rail on there?