>No HONOR
Damn right, that looks like some sort of nonsense a Ferengi would hawk. You think you could take down a Romulan with that piece of garbage? Its shape isn't even right, it's a fricking insult to Khaless.
Are you daft? Wtf is the steel grade on that POS, do you even have any clue? This looks like some literal chink leftover scrapmetal tacticool mall ninja shit you’d see in a boomer garage sale or gun show with a 10x markup like this anon suggests
Get a bowie, a kukri, or some other respectable knife and frick off. >also underage b&
I remember my friend was showing me his mall ass ninja knife he paid 350$ for
The thing literally weighed eight fricking pounds, it was damn near an inch thick steel billet, probably not even fricking hardened
What's even the point
Everyone born in 2005 is now 18, and some of them are even 19.
The passage of time never stops old man. Zoomers have small söyboy homosexual hands, you should know this by now you old dusty fart.
If you are posting flea market blades post the autistic cleavers blacksmiths make. It is a subtle American tradition with variation from the Southeast through the Midwest and I imagine elsewhere.
NTA, but I bought a HF machete years ago, I used it when setting up hunting blinds and for yard work. The blade was fine, it obviously wasn't anything special given the price but it wasn't garbage. The handle was shit though. It was some kind of semi-hard rubber material and it peeled away in layers over a period of 3-4 years.
Its basically because its what you get on hand and in the rural parts the police will not bother you if you go around with one, but they are horrendous weapons than make very "alarming" looking wounds but than barely will incapacitate your enemy or even break a bone, they are very thin in general and sharp, but have not destroying power so to speak. A fight with machetes tends to end with both full of slices and bleeding a lot but no one ends death unless they can get in an hospital.
harbor freights are fricking shit
good machetes are in the 10-25 buck range
the steel in harborfreight is fine fut the handles are hollow plastic shit that will break after use then your wasting at least 5 bucks worth of effort making a real handle out of random plywood or something.
Go for it, but its an over priced wall hanger, they are usually made of cheap steel and are quite thing, have an horrendous geometry to cut or cleave and this one in particular will not be useful for any work (it has a forward blade than in the wide part is too short to slice or cut, and without the right form to be used like an axe).
I really gotta get my tub of late 90s early 2000s flea market blades and throwing stars. Shit was so fricking cool kids these days will never understand buying cool ass swords and anime bootlegs at the same place
No.
I wouldn't buy that shit for 5 bucks.
My first blade resembled this specimen...
It brings back memories...
No HONOR
>No HONOR
Damn right, that looks like some sort of nonsense a Ferengi would hawk. You think you could take down a Romulan with that piece of garbage? Its shape isn't even right, it's a fricking insult to Khaless.
All fricking Klingons must fricking hang.
Are you daft? Wtf is the steel grade on that POS, do you even have any clue? This looks like some literal chink leftover scrapmetal tacticool mall ninja shit you’d see in a boomer garage sale or gun show with a 10x markup like this anon suggests
Get a bowie, a kukri, or some other respectable knife and frick off.
>also underage b&
I love how it's dull right at the belly of the blade, the exact place you would naturally aim to hit
moron
DO IT, Chom'hak-nar
infomercial_katana_injury.mp4
Looks like mallninja bullshit that isn't even worth $5.
I remember my friend was showing me his mall ass ninja knife he paid 350$ for
The thing literally weighed eight fricking pounds, it was damn near an inch thick steel billet, probably not even fricking hardened
What's even the point
morons and money.
Dixieland mall hits different
50 sounds like a great deal OP!
I like how there's a hollow part near the hilt for no reason, possibly compromising the durability.
that's for tactical shock absorption when engaging armored cyborgs
It's actually a carrying handle for when you're on those long range patrols
>tactical zombie killing gear
>that hand
You need to be 18 to post here
Everyone born in 2005 is now 18, and some of them are even 19.
The passage of time never stops old man. Zoomers have small söyboy homosexual hands, you should know this by now you old dusty fart.
You can get one on Amazon for $19 or $7 on aliexpress
If you are posting flea market blades post the autistic cleavers blacksmiths make. It is a subtle American tradition with variation from the Southeast through the Midwest and I imagine elsewhere.
>*sits in a closet for years collecting dust*
Based
I bought a katana and cut the flowering heads of roses off.
That fun alone is worth the price of admission.
oh look, it's a machete, but useless and moronic.
Daily reminder machetes are garden tools and are priced accordingly.
>harbor freight
>stainless steel
That doesn't instill much confidence but at least it's cheap.
NTA, but I bought a HF machete years ago, I used it when setting up hunting blinds and for yard work. The blade was fine, it obviously wasn't anything special given the price but it wasn't garbage. The handle was shit though. It was some kind of semi-hard rubber material and it peeled away in layers over a period of 3-4 years.
also the first choice for self defense in the global south
Its basically because its what you get on hand and in the rural parts the police will not bother you if you go around with one, but they are horrendous weapons than make very "alarming" looking wounds but than barely will incapacitate your enemy or even break a bone, they are very thin in general and sharp, but have not destroying power so to speak. A fight with machetes tends to end with both full of slices and bleeding a lot but no one ends death unless they can get in an hospital.
Holy shit the hospitals are murdering people now?!
Hey, those transplant organs gotta come from somewhere.
I bought that exact machete to cut brush and it got a slight bend near the handle after the first awkward chop at a small tree.
harbor freights are fricking shit
good machetes are in the 10-25 buck range
the steel in harborfreight is fine fut the handles are hollow plastic shit that will break after use then your wasting at least 5 bucks worth of effort making a real handle out of random plywood or something.
Just get a cold steel something or other if you want mallninja shit. At least their goofy machetes will hold up longer.
Looks cool. Can be used to cut grass.
Go for it, but its an over priced wall hanger, they are usually made of cheap steel and are quite thing, have an horrendous geometry to cut or cleave and this one in particular will not be useful for any work (it has a forward blade than in the wide part is too short to slice or cut, and without the right form to be used like an axe).
talk you out of it?
Ok, well, it's $50, so if you buy it you're a fricking moron plus you're short $50
you can get a cold steel black bear bowie for like 30 bucks and its full tang
I really gotta get my tub of late 90s early 2000s flea market blades and throwing stars. Shit was so fricking cool kids these days will never understand buying cool ass swords and anime bootlegs at the same place
I feel like this thread is subtly shitting on britbong serfs who aren't allowed to own kitchen cutlery without a license, and I like it.
Do bongs live rent free in your head or what?
Youd probably get better steel and a sharper edge from a 10 dollar yardwork machete at Home Depot
Looks larpy dont buy
https://www.amazon.com/Wartech-K1020-66-BL-Stainless-Hunting-Machete/dp/B00T89P7IO/
Most Wartech shit is 440 Steel. Just spend $20 on a OKC Machete with the handguard and use the rest of your $30 to buy 30 handjobs from your mom.