>Someone has already made a 3d printed pump action which sets off plastic BP cartridges with a bit of copper hooked up to a battery.
link to the documents?
You can literally buy dummy grenades, (re)arm the fuzes, fill with black powder, and put a cap on the bottom to make grenades. The cartels do it that way.
You be sure and let me know when you can 3D print casings, primers, smokeless powder, bolts, and rifled barrels, okay? Because until then 3D printed guns will remain the toys of 3D printing hobbyists (most of whom can already legally own guns in the first place) and will do precisely jack shit in terms of giving firepower to those in authoritarian shitholes
Ironically the only places you'll see these 3d printed guns in any significant numbers are in the hands of criminal organizations who are gonna oppress those poor 3rd worlders even harder with them. You see it with the luty and all the other half baked makeshift gun designs.
I hope so anon tired of this crap government and their crap controls on guns, no government should be able to tell me I can't have guns while simultaneously getting themselves more and more guns, turning the country into a lawless shithole not enforcing laws, becoming more tyranical, oh and warmongering for good measure
>3d printed guns used by schizos to shoot up their local grocery store will liberate the world
it's their natural born god given right to carry and do that.
just know that when they misuse it, or is in the process of threatening to misuse it, they carry their own death warrant in their hands.
They have printed ar uppers and lowers though. The barrel could be bored and rifled with ecm but there outer contours would prolly need machined unless you made a custom barrel bolt carrier design
No, they won't. But they can help you to get actual guns that can liberate you. See picrel.
If you're into 3D printed guns, then you know enough about guns in general to understand that you can't make anything comparable to an AR in your garage. But you don't have to, you just have to make something that can get you one.
develompment of the 3d guns should continue though, the better you can make them the better then chance of downing people to take real ones from.
They're getting better all the time, and eventually they will get to the point where they're on par with ''real'' guns
if you can print the complicated parts tomachine like the recievers than 90% of the job is done. the internal parts are all easy to make with normal lathes and mills
t.makes ARs as a job
Would liberate world yes, but problem is that too many of the people who print 3d guns are too low IQ to keep their mouth shut from public social media or avoid doing other crimes and as result too many of them get caught. Alternatively some Karen reports them cops. The FGC9 MK2 is more reliable than the 1st gen FGC9.
RIP JStark.
i would have assumed most people printing prototype guns have real firearms to base their design on.
but if they dont and they are forbidden from owning and the country has strict bans on weapons and ammo i would still say that its workable, but that situation is only because they cannot in the first place.
those of us in shooter friendly countries should actively help them out with knowledge to DIY cartridges and bullets and energetic materials for resisting bad stuff happening to them in countries that preemptively forbid firearms and ammunition and parts. Better than letting state sponsored genocide to occur unimpeded. Firearms and ammo should be absolutely everywhere, all communities should have as much firearms and ammunition as south central in the mid 80s.
Not if using post processed epoxy coated PLA and small metal insert slides and adequate springs. Or you could even just print in nylon and get just a little lower performance than commercial industrial injection molded nylon polymer frames. Plain PLA by itself when done right is fine for up to 380 acp long term and normal 9mm shorter term. In hybrid usage (countries with already existing prolific civilian firearms and industry), one guy with a good nylon printer can pump out dozens of glock and ar mags (up to and including homemade springs and followers) and long term glock frames.
You be sure and let me know when you can 3D print casings, primers, smokeless powder, bolts, and rifled barrels, okay? Because until then 3D printed guns will remain the toys of 3D printing hobbyists (most of whom can already legally own guns in the first place) and will do precisely jack shit in terms of giving firepower to those in authoritarian shitholes
And not a single part of it was 3D printed you moronic gorilla Black person, he could have made a fricking pipe bomb and potentially had the same effect
>Call me when we have all these things we don't need, THEN it'll matter!!!
gay
3 months ago
Anonymous
I never said that, explain to me how you could possibly print smokeless powder, primers or casings. What's that? You can't and you're a knuckle dragging moron?
if a 3d printed mandrel allows for home rifling with hardened alloys, is the FCG9 still not fully 3d printed so it doesnt count as a 3d printed gun because it has a metal barrel?
Holy shit put the watermelon down and wipe the chicken grease out of your eyes you overly melanated pavement ape. See the very first post in the thread? The one called an OP? Go have your handler read it for you and be amazed at how it doesn't start with 'improvised guns' or 'homemade guns' but '3d printed guns' which is why I DON'T GIVE A FRICK about what some wannabe samurai did to the guy that banned his hentai or whatever. My point, assuming you have the braincells to comprehend it which you clearly don't, was that 3D printed firearms are useless in the hands of any wannabe rebel group unless those guns also have a supply of reliable modern ammo and rifled barrels giving them ballistic performance comparable to a non 3D printed gun. And ammo and barrels just aren't things you can print so good luck finding them in shitholeistan.
>Duhhh, call me wen u can make all this stuff it doesn't need! Until den, it's useless!!!
No amount of your b***hing will change what you said.
3 months ago
Anonymous
Cope, seethe, dilate, then try to get back to me with something other than more inane Black personbabble
3 months ago
Anonymous
>You claiming that 3d printed guns require the following to be relevant
You be sure and let me know when you can 3D print casings, primers, smokeless powder, bolts, and rifled barrels, okay? Because until then 3D printed guns will remain the toys of 3D printing hobbyists (most of whom can already legally own guns in the first place) and will do precisely jack shit in terms of giving firepower to those in authoritarian shitholes
>You be sure and let me know when you can 3D print casings, primers, smokeless powder, bolts, and rifled barrels, okay?
Also you write like a gay.
3 months ago
Anonymous
Oh my god. I am not going to dumb down my points any further when you are clearly incapable of connecting the dots between the OP and my response to the OP. I refer you to my previous post.
>A-also you w-w-write like a f-gay
I call you a Black person like a dozen different ways and that's the best comeback your stunted little brain could come up with? I'm somehow even more disappointed in you than your single mother is. I mean goddamn, at least just call me an butthole or something instead of trying this one liner shit, frick.
3 months ago
Anonymous
>You claiming that 3d printed guns require the following to be relevant
[...] >You be sure and let me know when you can 3D print casings, primers, smokeless powder, bolts, and rifled barrels, okay?
Also you write like a gay.
>You be sure and let me know when you can 3D print casings, primers, smokeless powder, bolts, and rifled barrels, okay?
LOL this means you think you need rifled barrels and smokeless powder to have an effective weapon and absolutely no amount of your weaseling and pilpul will change that fact.
You've been fricking prolapsed, homosexual.
3 months ago
Anonymous
>you think you need rifled barrels and smokeless powder to have an effective weapon
Yes, like every sane man does, you dipshit
3 months ago
Anonymous
>you think you need rifled barrels and smokeless powder to have an effective weapon
Hold up...wait a minute...put your grape drink down...are you seriously insinuating that a smooth bore black powder weapon is 'effective' in the modern day? Is this literally the point you are trying to argue? If someone put a goddamn musket straight from 1776 in your hands and told you to go fight soldiers with AR15s and body armor you would feel confident that you could win? Surely you jest?
3 months ago
Anonymous
>are you seriously insinuating that a smooth bore black powder weapon is 'effective' in the modern day?
The former prime minister of japan was killed with an electrically primed blunderbuss you fricking moron.
>go fight soldiers with AR15s and body armor you would feel confident that you could win?
Soldiers dont use AR15s and civilians don't have to fight armies in an open field like an RTS, you noguns eurogay.
3 months ago
Anonymous
>Try to snipe a group of aoldier 100m away from a bush >Miss completely >Big could of smoke gives away where i am straight away >Volley of gunfire proceed to be unleashed on my general direction
3 months ago
Anonymous
Wow, thank God that's not literally the only kind of combat ever, or else you might have a point.
https://i.imgur.com/jdtNe1k.png
Maybe because shooting water jugs ten feet away isn't impressive by any firearms metric and therefore not even worthy of discussion? Shit, I bet one of Joergsprave's crossbows has more killing potential than that thing.
>My imagination says it doesn't work so it doesn't.
Shinzo Abe was killed with a fricking blunderbuss. You eurogays will never get out from under that fact.
3 months ago
Anonymous
>eurogays
he's another burger idiot.
Us euros are smarted than that.
3 months ago
Anonymous
Good luck making a 100m shot with literally any pistol.
3 months ago
Anonymous
i forgot to write in musket, and yeah that was my entire point
3 months ago
Anonymous
>Poor accuracy
A) Drag stabilized slugs have been known to achieve 4 MOA.
B) Do the electrochemical rifling trick
C) Fire multiple barrels at once for improved hit probability.
D) Make a blackpowder recoiless shot cannon to saturate the target area.
>Smoke cloud gives away user position
A) Make a suppressor for the smoke to condense on to.
B) Fire at night.
C) Fire from indoors out a window through curtains.
D) Setup gun to remotely fire.
3 months ago
Anonymous
Man why the frick do you keep bringing up hentai land even after I've repeatedly told you why I don't care? Now quit being a pedantic frick and answer the damn question so I can know exactly what intensity of laughter I should be directing towards you.
>you noguns eurogay
lol. lmao even. Now post yours or forever out yourself as an impotent noguns.
3 months ago
Anonymous
>Man why the frick do you keep bringing up hentai land even after I've repeatedly told you why I don't care?
I don't give a shit that you don't care, your not caring does not erase the real world example that completely obliterates your point.
>Now quit being a pedantic frick and answer the damn question
The fact that the former prime minister of a major country was assassinated in broad daylight with such a weapon answers your question absolutely and definitively.
>lol. lmao even. Now post yours or forever out yourself as an impotent noguns.
Here's a pic from last night, let me know if you desperately need a fresh timestamp
Bonus points if you can identify the antique by taste.
3 months ago
Anonymous
What is that thing? It's definitely something interesting.
3 months ago
Anonymous
It's an original Dreyse needle rifle that's been repaired and beat up over the last two centuries. Still fires, but the barrel's smooth as polished glass at this point.
3 months ago
Anonymous
That rifle remembers the birth of the grandfather to the founder of Pepperridge Farms
3 months ago
Anonymous
>The former prime minister of japan was killed with an electrically primed blunderbuss you fricking moron.
you could only kill 1-2 ppl max with that "gun". While it is useful for an assassination, it is completely pointless in actual combat.
3 months ago
Anonymous
In a mass civil conflict the sides aren't going to meet in an open field like in a video game. The "actual combat" is someone waiting in an alleyway covered in garbage until an enemy walks by. It would be nothing but ambushes and surprise raids and assassinations.
Also you need to check your math again if you think that taking out 1-2 enemies with one man, when you vastly outnumber your enemy, is a losing proposition.
And so, on February 11th 2024 A.D., a copypasta was created...
3 months ago
Anonymous
Shame it's so fricking gay and wrong.
3 months ago
Anonymous
>Thankfully it's so fricking based and correct
FTFY
3 months ago
Anonymous
It's just five year out of date eurotrash noguns "It's impossible" takes said loudly.
%3D%3D
3 months ago
Anonymous
Funny everyone goes dead quiet when Suckboytony's fully plastic build is posted, then they just wait a little while and go back to excuseposting about how making guns is impossible.
3 months ago
Anonymous
Maybe because shooting water jugs ten feet away isn't impressive by any firearms metric and therefore not even worthy of discussion? Shit, I bet one of Joergsprave's crossbows has more killing potential than that thing.
>You can't print ammo and barrels
There's printing mold negatives and then sand casting bronze, like old cannons.
There's making otherwise 3D printed guns with steel barrels, which can be electrochemically rifled with a 3D printed mandrel, and using straight tubes can be reinforced with collars to avoid machining.
But what about the ammo?
I think there may be some room to 3D print ammo. FDM printed PEEK test samples come out about 11,600 psi tensile strength. C260 cartridge brass in H04 temper is 71,000 psi minimum tensile. That suggests you could run a 3D printed PEEK case at 16% the pressure of a brass equivalent, and that's without making the case web thicker or adding a little cut of metal pipe for extra pressure capacity.
So, a 3D-printed 50 bmg cartridge would go from 18,000Joules to 2900 Joules. Sabots show us that nylon can be used to engage rifling, so PEEK bullets should work too. If you made an aerodynamic hollow PEEK bullet and put a 3/8" x 1" dowel pin up the back, that should give you about 240 grains at 2000 fps, with G1 BC 0.22. That would get 200 yards in 0.37 sec and still have 1350 J on target.
3 months ago
Anonymous
>I think there may be some room to 3D print ammo. FDM printed PEEK test samples come out about 11,600 psi
you fundamentally misunderstand the function of a cartridge case. the cartridge only has to survive firing enough to be extractable and obturate the chamber effectively. thinking about the wall strength as a simple function of the material properly is totally misguided as the cartridge does not resist the pressure of the propellant gasses. if the chamber is fully supported the load is transfered almost completely to the chamber walls.
577 zoomer was loaded to warshot levels of BP and the cartridges achieved obturation and extraction with TPU.
3 months ago
Anonymous
Any tests of this on a fun target we can look at?
Every new ammunition should be tested on the Paul Harrell meat target.
3 months ago
Anonymous
sorry, it's a 480 grain dead soft lead conical at ~1000fps. it would be catastrophic, and prone to flattening. I haven't shot anything for ballistic testing.
3 months ago
Anonymous
What's the material property that keeps pressure from blowing through the case webbing?
Why does 45 super have a thicker case web than 45 acp?
Why did the US military reject aluminum cartridges after a long development program in the 60's?
How come no one runs aluminum ammo over 40,000 psi?
Why does the Sig furry use a steel case head for it's 80,000 psi cartridge?
Do you get off to seeing that half the catalog is your own threads, or what man? Why do you do necro these worthless threads where people aren't even bothering to argue with you?
You be sure and let me know when you can 3D print casings, primers, smokeless powder, bolts, and rifled barrels, okay? Because until then 3D printed guns will remain the toys of 3D printing hobbyists (most of whom can already legally own guns in the first place) and will do precisely jack shit in terms of giving firepower to those in authoritarian shitholes
Swerve, wienergays
%3D
That is a 100% 3d printed firearm with electrical ignition and plastic cases.
I wonder if you could get enough power for ignition out of piezo electrics. If so, you could ignite a cartridge like this without an external power source
with piezoelectrics you could theoretically just put a piezo crystal onto your bolt and have a normal ass FCG to strike it with a hammer to generate the spark for ignition. Just dont know if there would be enough energy
As someone who owns one, I agree. They are cool and have their place, but many people get way to basedfaced and try to force it into applications where it's just subobtimal (often combined with designs that show a distinct lack of mechanical design experience)
>still need barrel ammo and bcg that are regulated outside of the US
Lmao, 3d printed guns are a meme for american manchildrens who like to fantasize about being le ebin subverter
Improvised weapons are useful for acquiring factory made weapons. Guerrillas use them to carry out ambushes and salvage factory made weapons from the enemy.
A 3D printed gun may not be as versatile as a factory made rifle, but it can be used to ambush people with factory made rifles and trade up.
3d printing is shit. throw your plastic 3d printer in the garbage and but a desktop cnc machine. you can make actually good servicable firearms that will not shoot themselves apart
yeah, we know, anything else about defeating/frustrating access regulation you want to talk about?
You own a perfectly serviceable kimber and it hasn't liberated you from shit.
i am liberated from 10 round bans
if you cant get ammo or reloading components it doesnt mean shit but 3d grenades loaded with blackpowder now that has potential
you can diy all of that.
Diy cases smart man.
This homie's never heard of a pipe bomb.
>This homie's never heard of a pipe bomb.
https://twitter.com/ModeratorGage/status/1700969150632321407?t=KHTOxPNU1REjGDlcKavVdQ&s=19
https://twitter.com/MrDeep_ammoguy/status/1736161638024204608?t=KHTOxPNU1REjGDlcKavVdQ&s=19
https://twitter.com/MrDeep_ammoguy/status/1736160623698825500?t=KHTOxPNU1REjGDlcKavVdQ&s=19
https://twitter.com/MrDeep_ammoguy/status/1685747487858995200?t=KHTOxPNU1REjGDlcKavVdQ&s=19
Someone has already made a 3d printed pump action which sets off plastic BP cartridges with a bit of copper hooked up to a battery.
It literally cannot get easier than that.
>Someone has already made a 3d printed pump action which sets off plastic BP cartridges with a bit of copper hooked up to a battery.
link to the documents?
message suckboi tony on the dd rocket.chat
You mean like a pipe bomb?
>pipe bonnb
more like poopbomb
You can literally buy dummy grenades, (re)arm the fuzes, fill with black powder, and put a cap on the bottom to make grenades. The cartels do it that way.
Ironically the only places you'll see these 3d printed guns in any significant numbers are in the hands of criminal organizations who are gonna oppress those poor 3rd worlders even harder with them. You see it with the luty and all the other half baked makeshift gun designs.
Who's fighting the government with tools meant for liberation?
It's little nasty proto-governments (gangs).
Most pistol calibers can be reloaded with black powder.
I hope so anon tired of this crap government and their crap controls on guns, no government should be able to tell me I can't have guns while simultaneously getting themselves more and more guns, turning the country into a lawless shithole not enforcing laws, becoming more tyranical, oh and warmongering for good measure
>3d printed guns used by schizos to shoot up their local grocery store will liberate the world
They'll just buy a gun from a store. 3d printing weapons is for high IQ law abiding citizens.
I feel like 3D printed UAVs and UGVs are more powerful.
>3d printed guns used by schizos to shoot up their local grocery store will liberate the world
it's their natural born god given right to carry and do that.
just know that when they misuse it, or is in the process of threatening to misuse it, they carry their own death warrant in their hands.
Too little too late though. Natural rights can be taken away just as regular rights can, though not without excuse
Has there been any movement towards the intermediate cartridge rifle version of the FGC-9?
Wouldn’t work fcg 9 is direct blowback
They have printed ar uppers and lowers though. The barrel could be bored and rifled with ecm but there outer contours would prolly need machined unless you made a custom barrel bolt carrier design
No, they won't. But they can help you to get actual guns that can liberate you. See picrel.
If you're into 3D printed guns, then you know enough about guns in general to understand that you can't make anything comparable to an AR in your garage. But you don't have to, you just have to make something that can get you one.
>Here you go, bro. Kill the armed soldiers.
you jest, but there is actually a well known myth of a confirmed kill for a ranger using an MRE spoon.
meals ready to RIP AND TEAR (your anus)
you think he went the back door? i was thinking he breeched in the front on the neck with the pointy end of the spoon.
develompment of the 3d guns should continue though, the better you can make them the better then chance of downing people to take real ones from.
They're getting better all the time, and eventually they will get to the point where they're on par with ''real'' guns
if you can print the complicated parts tomachine like the recievers than 90% of the job is done. the internal parts are all easy to make with normal lathes and mills
t.makes ARs as a job
Not really, no.
Would liberate world yes, but problem is that too many of the people who print 3d guns are too low IQ to keep their mouth shut from public social media or avoid doing other crimes and as result too many of them get caught. Alternatively some Karen reports them cops. The FGC9 MK2 is more reliable than the 1st gen FGC9.
RIP JStark.
I think they need better than pistol caliber though, IIIA only weighs 1lb/ft^2.
There should be more recoilless cannon designs, or novel ways to get ~2000 fps with direct blowback.
The ammo will be the problem. Have real guns and the option to 3d-print something in the same caliver.
i would have assumed most people printing prototype guns have real firearms to base their design on.
but if they dont and they are forbidden from owning and the country has strict bans on weapons and ammo i would still say that its workable, but that situation is only because they cannot in the first place.
those of us in shooter friendly countries should actively help them out with knowledge to DIY cartridges and bullets and energetic materials for resisting bad stuff happening to them in countries that preemptively forbid firearms and ammunition and parts. Better than letting state sponsored genocide to occur unimpeded. Firearms and ammo should be absolutely everywhere, all communities should have as much firearms and ammunition as south central in the mid 80s.
Sure, but first they will liberate you from your fingers
Not if using post processed epoxy coated PLA and small metal insert slides and adequate springs. Or you could even just print in nylon and get just a little lower performance than commercial industrial injection molded nylon polymer frames. Plain PLA by itself when done right is fine for up to 380 acp long term and normal 9mm shorter term. In hybrid usage (countries with already existing prolific civilian firearms and industry), one guy with a good nylon printer can pump out dozens of glock and ar mags (up to and including homemade springs and followers) and long term glock frames.
You be sure and let me know when you can 3D print casings, primers, smokeless powder, bolts, and rifled barrels, okay? Because until then 3D printed guns will remain the toys of 3D printing hobbyists (most of whom can already legally own guns in the first place) and will do precisely jack shit in terms of giving firepower to those in authoritarian shitholes
You massive Black personhomosexual the former prime minister of Japan was assassinated with a black powder pipe gun with copper wire for ignition.
And not a single part of it was 3D printed you moronic gorilla Black person, he could have made a fricking pipe bomb and potentially had the same effect
It showed you don't need casings, primers, smokeless powder, or rifling you FRICKING moron.
which means it isn't a 3D printed gun you fricking clown
>Call me when we have all these things we don't need, THEN it'll matter!!!
gay
I never said that, explain to me how you could possibly print smokeless powder, primers or casings. What's that? You can't and you're a knuckle dragging moron?
if a 3d printed mandrel allows for home rifling with hardened alloys, is the FCG9 still not fully 3d printed so it doesnt count as a 3d printed gun because it has a metal barrel?
Holy shit put the watermelon down and wipe the chicken grease out of your eyes you overly melanated pavement ape. See the very first post in the thread? The one called an OP? Go have your handler read it for you and be amazed at how it doesn't start with 'improvised guns' or 'homemade guns' but '3d printed guns' which is why I DON'T GIVE A FRICK about what some wannabe samurai did to the guy that banned his hentai or whatever. My point, assuming you have the braincells to comprehend it which you clearly don't, was that 3D printed firearms are useless in the hands of any wannabe rebel group unless those guns also have a supply of reliable modern ammo and rifled barrels giving them ballistic performance comparable to a non 3D printed gun. And ammo and barrels just aren't things you can print so good luck finding them in shitholeistan.
>Duhhh, call me wen u can make all this stuff it doesn't need! Until den, it's useless!!!
No amount of your b***hing will change what you said.
Cope, seethe, dilate, then try to get back to me with something other than more inane Black personbabble
>You claiming that 3d printed guns require the following to be relevant
>You be sure and let me know when you can 3D print casings, primers, smokeless powder, bolts, and rifled barrels, okay?
Also you write like a gay.
Oh my god. I am not going to dumb down my points any further when you are clearly incapable of connecting the dots between the OP and my response to the OP. I refer you to my previous post.
>A-also you w-w-write like a f-gay
I call you a Black person like a dozen different ways and that's the best comeback your stunted little brain could come up with? I'm somehow even more disappointed in you than your single mother is. I mean goddamn, at least just call me an butthole or something instead of trying this one liner shit, frick.
>You be sure and let me know when you can 3D print casings, primers, smokeless powder, bolts, and rifled barrels, okay?
LOL this means you think you need rifled barrels and smokeless powder to have an effective weapon and absolutely no amount of your weaseling and pilpul will change that fact.
You've been fricking prolapsed, homosexual.
>you think you need rifled barrels and smokeless powder to have an effective weapon
Yes, like every sane man does, you dipshit
>you think you need rifled barrels and smokeless powder to have an effective weapon
Hold up...wait a minute...put your grape drink down...are you seriously insinuating that a smooth bore black powder weapon is 'effective' in the modern day? Is this literally the point you are trying to argue? If someone put a goddamn musket straight from 1776 in your hands and told you to go fight soldiers with AR15s and body armor you would feel confident that you could win? Surely you jest?
>are you seriously insinuating that a smooth bore black powder weapon is 'effective' in the modern day?
The former prime minister of japan was killed with an electrically primed blunderbuss you fricking moron.
>go fight soldiers with AR15s and body armor you would feel confident that you could win?
Soldiers dont use AR15s and civilians don't have to fight armies in an open field like an RTS, you noguns eurogay.
>Try to snipe a group of aoldier 100m away from a bush
>Miss completely
>Big could of smoke gives away where i am straight away
>Volley of gunfire proceed to be unleashed on my general direction
Wow, thank God that's not literally the only kind of combat ever, or else you might have a point.
>My imagination says it doesn't work so it doesn't.
Shinzo Abe was killed with a fricking blunderbuss. You eurogays will never get out from under that fact.
>eurogays
he's another burger idiot.
Us euros are smarted than that.
Good luck making a 100m shot with literally any pistol.
i forgot to write in musket, and yeah that was my entire point
>Poor accuracy
A) Drag stabilized slugs have been known to achieve 4 MOA.
B) Do the electrochemical rifling trick
C) Fire multiple barrels at once for improved hit probability.
D) Make a blackpowder recoiless shot cannon to saturate the target area.
>Smoke cloud gives away user position
A) Make a suppressor for the smoke to condense on to.
B) Fire at night.
C) Fire from indoors out a window through curtains.
D) Setup gun to remotely fire.
Man why the frick do you keep bringing up hentai land even after I've repeatedly told you why I don't care? Now quit being a pedantic frick and answer the damn question so I can know exactly what intensity of laughter I should be directing towards you.
>you noguns eurogay
lol. lmao even. Now post yours or forever out yourself as an impotent noguns.
>Man why the frick do you keep bringing up hentai land even after I've repeatedly told you why I don't care?
I don't give a shit that you don't care, your not caring does not erase the real world example that completely obliterates your point.
>Now quit being a pedantic frick and answer the damn question
The fact that the former prime minister of a major country was assassinated in broad daylight with such a weapon answers your question absolutely and definitively.
>lol. lmao even. Now post yours or forever out yourself as an impotent noguns.
Here's a pic from last night, let me know if you desperately need a fresh timestamp
Bonus points if you can identify the antique by taste.
What is that thing? It's definitely something interesting.
It's an original Dreyse needle rifle that's been repaired and beat up over the last two centuries. Still fires, but the barrel's smooth as polished glass at this point.
That rifle remembers the birth of the grandfather to the founder of Pepperridge Farms
>The former prime minister of japan was killed with an electrically primed blunderbuss you fricking moron.
you could only kill 1-2 ppl max with that "gun". While it is useful for an assassination, it is completely pointless in actual combat.
In a mass civil conflict the sides aren't going to meet in an open field like in a video game. The "actual combat" is someone waiting in an alleyway covered in garbage until an enemy walks by. It would be nothing but ambushes and surprise raids and assassinations.
Also you need to check your math again if you think that taking out 1-2 enemies with one man, when you vastly outnumber your enemy, is a losing proposition.
And so, on February 11th 2024 A.D., a copypasta was created...
Shame it's so fricking gay and wrong.
>Thankfully it's so fricking based and correct
FTFY
It's just five year out of date eurotrash noguns "It's impossible" takes said loudly.
%3D%3D
Funny everyone goes dead quiet when Suckboytony's fully plastic build is posted, then they just wait a little while and go back to excuseposting about how making guns is impossible.
Maybe because shooting water jugs ten feet away isn't impressive by any firearms metric and therefore not even worthy of discussion? Shit, I bet one of Joergsprave's crossbows has more killing potential than that thing.
>You can't print ammo and barrels
There's printing mold negatives and then sand casting bronze, like old cannons.
There's making otherwise 3D printed guns with steel barrels, which can be electrochemically rifled with a 3D printed mandrel, and using straight tubes can be reinforced with collars to avoid machining.
But what about the ammo?
I think there may be some room to 3D print ammo. FDM printed PEEK test samples come out about 11,600 psi tensile strength. C260 cartridge brass in H04 temper is 71,000 psi minimum tensile. That suggests you could run a 3D printed PEEK case at 16% the pressure of a brass equivalent, and that's without making the case web thicker or adding a little cut of metal pipe for extra pressure capacity.
So, a 3D-printed 50 bmg cartridge would go from 18,000Joules to 2900 Joules. Sabots show us that nylon can be used to engage rifling, so PEEK bullets should work too. If you made an aerodynamic hollow PEEK bullet and put a 3/8" x 1" dowel pin up the back, that should give you about 240 grains at 2000 fps, with G1 BC 0.22. That would get 200 yards in 0.37 sec and still have 1350 J on target.
>I think there may be some room to 3D print ammo. FDM printed PEEK test samples come out about 11,600 psi
you fundamentally misunderstand the function of a cartridge case. the cartridge only has to survive firing enough to be extractable and obturate the chamber effectively. thinking about the wall strength as a simple function of the material properly is totally misguided as the cartridge does not resist the pressure of the propellant gasses. if the chamber is fully supported the load is transfered almost completely to the chamber walls.
577 zoomer was loaded to warshot levels of BP and the cartridges achieved obturation and extraction with TPU.
Any tests of this on a fun target we can look at?
Every new ammunition should be tested on the Paul Harrell meat target.
sorry, it's a 480 grain dead soft lead conical at ~1000fps. it would be catastrophic, and prone to flattening. I haven't shot anything for ballistic testing.
What's the material property that keeps pressure from blowing through the case webbing?
Why does 45 super have a thicker case web than 45 acp?
Why did the US military reject aluminum cartridges after a long development program in the 60's?
How come no one runs aluminum ammo over 40,000 psi?
Why does the Sig furry use a steel case head for it's 80,000 psi cartridge?
seems to be starting it's tests in Myanmar IIRC, with liberators using them against the junta.
3D printed anthrax would
bump
Do you get off to seeing that half the catalog is your own threads, or what man? Why do you do necro these worthless threads where people aren't even bothering to argue with you?
"No"
Pardon me, that was rude. I meant to say
>No
They're fun and all and they work fine, but ammo remains an insane bottleneck for the concept.
Swerve, wienergays
%3D
That is a 100% 3d printed firearm with electrical ignition and plastic cases.
Every noguns naysayer got real quiet when the plastic cyberpunk musket got posted.
Still wondering why pic related never got popular. It just makes me realize how unpopular 3D printed guns really are.
Everyone knows deep down they could make a shitty ghetto blaster out of metal if they wanted to. Noguns just like to *pretend* it's impossible.
The sad truth is everyone who wants a gun has one, most euros really are just that homosexual, they're just pretending it's been forced on them.
Get back to me when you can 3d-print functional bullets. Weapons are shit easy to get but the gov over here has a squeeze on the leaden jellybeans.
Hey homosexual see here
I wonder if you could get enough power for ignition out of piezo electrics. If so, you could ignite a cartridge like this without an external power source
You could always have a wind up dynamo.
with piezoelectrics you could theoretically just put a piezo crystal onto your bolt and have a normal ass FCG to strike it with a hammer to generate the spark for ignition. Just dont know if there would be enough energy
Pizoelectric lighters literally do this. Gas grills often have a built in pizo sparker.
A crossbow would have been more effective by that point.
%3D%3D
Sure but I think we're drifting pretty far into the assumption that our prospective musketeer wont have access to any kind of battery.
I'm gonna say it.
3D printgays are the mall ninjas of modern times.
As someone who owns one, I agree. They are cool and have their place, but many people get way to basedfaced and try to force it into applications where it's just subobtimal (often combined with designs that show a distinct lack of mechanical design experience)
If they're mallninjas then who's their version of Gecko45?
>still need barrel ammo and bcg that are regulated outside of the US
Lmao, 3d printed guns are a meme for american manchildrens who like to fantasize about being le ebin subverter
3d printed ar15 lowers are neat
Improvised weapons are useful for acquiring factory made weapons. Guerrillas use them to carry out ambushes and salvage factory made weapons from the enemy.
A 3D printed gun may not be as versatile as a factory made rifle, but it can be used to ambush people with factory made rifles and trade up.
this.
3d printed guns are garbage and there is no need for them when cnc machines are available to the average poor if he can save a few sheckles
why would a slam fire have a trigger?
I think it was some kind of safety
Can't remember what kind
Likely imaginary
3d printing is shit. throw your plastic 3d printer in the garbage and but a desktop cnc machine. you can make actually good servicable firearms that will not shoot themselves apart
oh cool, what desktop CNC do you use?
makera carvera. its expensive and i would not buy it again instead opting for a more basic cheaper 3 axis with a stronger spindle
I don't think they'll liberate the world, but they might help. I just do it for fun.
pic related.
8===D
this isn't a troll post. Is anyone else afraid of the microplastics, don't you think we should stop with this plastic shit b4 we all die?