very problematic, hope the ATF arrests this terrorist supporter before mass school shooters conceal one in their pants into a nursery and cause a massacre
>Bargain basement ar barrels and bolts totaling $600 >$100 Chinese printer >Cordless drill from Walmart for $50 >$750 untraceable minimum >It's dumb I hate it
Why are you like this
>$5400 a minute to fire, assuming a cost per cartridge of 50c and a 1800 rpm drill
I don't know why anyone considers a minigun any more practical than an M2 browning.
Neither is practical for shooting trash in the woods anon.
Not everything has to be immediately useful.
I don't build flamboyant red anodized ARs to shoot tracers at tannerite in a holler on the weekend because I NEED to, I do it because I WANT to, because it's fun.
And guess what? In another week or two I'll probably be doing it with a plastic minigun I cobbled together out of spares I keep in an old trash can in the garage and five dollars worth of plastic.
Don't try to explain fun to fudds, they're vehemently against the concept of fun. Guns are tools, you should own one handgun and take it to the range weekly where you shoot exactly 2 mags through it before comparing your performance with the week prior. Only men who've served in the United States Military may own a rifle. If you enjoy shooting guns, then you're a criminal. Guns can only be black or stainless steel, wood is acceptable for hunting rifles. Plinking, straight to jail. Cerakote graphics, sweet-heart grips, and anodized parts, jail. Bullets other than 45ACP and 22LR, you're going to jail. If you smile in the presence of a gun, believe it or not, jail.
That anon was clearly a neofudd, so take everything you said and replace .45 with 9mm, and owning a rifle is mandatory but it better not have a barrel longer than 12".
3 months ago
Anonymous
>If you get more than 2600fps from your legally-mandated .223 rifle, jail. >.223 Wylde chamber, jail. >Lower must have dimple for third hole, and you must carry a full-auto FCG in your range bag, thereby allowing you to demonstrate to other shooters that you could drill the third hole and go full auto if you felt like it. Failure to display your full-auto FCG to other shooters upon request - straight to jail.
.17 would probably allow for a 1/3rd or even 1/4th downscale of size, with a power drill (and proper ATF forms of course) it would be legitimately man portable.
>barrels and bots
Buy in cash from LGS >cordless drill
Buy in cash from Walmart >3D printer and filament
Buy in cash from microcenter >files
Download via Tor/VPN bought with cash/etc.
Everything can be bought without a paper trail, but the printer and drill and hardware are innocuous enough. Most people are just printing figurines or or dumb stuff so it's not worth wasting time watching these people for wrong-think.
>tfw I live in the timeline where it is possible, legal, but unreasonable, to build a minigun gunpod for my car
I never expected to have to deal with a dilemma of this magnitude.
>Using 16in mid-length barrels
Why wouldn't you use smaller barrels to cut on weight, around 12". It doesn't have a stock or something, or would putting it on a Mount make it an SBR with barrels below 16"?
Yeah
neat. just the instructions:
https://files.catbox.moe/l5n44g.pdf
very problematic, hope the ATF arrests this terrorist supporter before mass school shooters conceal one in their pants into a nursery and cause a massacre
>3D printer
>all functional parts are commercially produced metal
>3D printed shrouds and handles
Many such cases.
how to prove you didn't read the article before commenting in one easy step
>Bargain basement ar barrels and bolts totaling $600
>$100 Chinese printer
>Cordless drill from Walmart for $50
>$750 untraceable minimum
>It's dumb I hate it
Why are you like this
>$5400 a minute to fire, assuming a cost per cartridge of 50c and a 1800 rpm drill
I don't know why anyone considers a minigun any more practical than an M2 browning.
Neither is practical for shooting trash in the woods anon.
Not everything has to be immediately useful.
I don't build flamboyant red anodized ARs to shoot tracers at tannerite in a holler on the weekend because I NEED to, I do it because I WANT to, because it's fun.
And guess what? In another week or two I'll probably be doing it with a plastic minigun I cobbled together out of spares I keep in an old trash can in the garage and five dollars worth of plastic.
Don't try to explain fun to fudds, they're vehemently against the concept of fun. Guns are tools, you should own one handgun and take it to the range weekly where you shoot exactly 2 mags through it before comparing your performance with the week prior. Only men who've served in the United States Military may own a rifle. If you enjoy shooting guns, then you're a criminal. Guns can only be black or stainless steel, wood is acceptable for hunting rifles. Plinking, straight to jail. Cerakote graphics, sweet-heart grips, and anodized parts, jail. Bullets other than 45ACP and 22LR, you're going to jail. If you smile in the presence of a gun, believe it or not, jail.
Owning a commie gun?
Oh you better believe that's a paddlin'.
>Beretta
Eye tallion? Jail.
>Springfield
Welcome to the wolf pack brother, there's coffee and donuts inside.
That anon was clearly a neofudd, so take everything you said and replace .45 with 9mm, and owning a rifle is mandatory but it better not have a barrel longer than 12".
>If you get more than 2600fps from your legally-mandated .223 rifle, jail.
>.223 Wylde chamber, jail.
>Lower must have dimple for third hole, and you must carry a full-auto FCG in your range bag, thereby allowing you to demonstrate to other shooters that you could drill the third hole and go full auto if you felt like it. Failure to display your full-auto FCG to other shooters upon request - straight to jail.
>your barrel is too short? believe it or not jail
Post the AR.
Wonder how easy it would be to downsize to .17hmr or even .17 M2.
.17 would probably allow for a 1/3rd or even 1/4th downscale of size, with a power drill (and proper ATF forms of course) it would be legitimately man portable.
>don't fire continuously for a minute
>homosexuals hate this one trick
Then why build a gatling gun? Are you stupid?
>untraceable
Should we tell him guys
It's too late, the feds are omniscient and live in your walls.
>barrels and bots
Buy in cash from LGS
>cordless drill
Buy in cash from Walmart
>3D printer and filament
Buy in cash from microcenter
>files
Download via Tor/VPN bought with cash/etc.
Everything can be bought without a paper trail, but the printer and drill and hardware are innocuous enough. Most people are just printing figurines or or dumb stuff so it's not worth wasting time watching these people for wrong-think.
>tfw I live in the timeline where it is possible, legal, but unreasonable, to build a minigun gunpod for my car
I never expected to have to deal with a dilemma of this magnitude.
For $39 you could even crank it from inside your car lol
Alright /k/, how much printer do I need to make one of these?
Ender 3 is minimum. Says so in the instructions.
Do the barrels need a gas port? If not
https://www.peacegeek.net/product-p/z-0383.htm
>Using 16in mid-length barrels
Why wouldn't you use smaller barrels to cut on weight, around 12". It doesn't have a stock or something, or would putting it on a Mount make it an SBR with barrels below 16"?