Youtuber finally speaks what is on everyone's mind

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 2 years ago
    Anonymous

    Finally these morons aren't making cool cheap pistol scarce and are finally giving impulse buying morons shit advice.

  2. 2 years ago
    Anonymous

    It's almost as if the AK was never what it was cracked up to be

    • 2 years ago
      Anonymous

      It's a fuvking sheet metal rifle from the 40s. That's all. Nobody heralds the hk33 or FNC as a magical alternative to more modern designs with machined, forged, or extruded receivers. But somehow the AK is considered special.

      • 2 years ago
        Anonymous

        Ubiquity, that's all

      • 2 years ago
        Sieg

        Aks we're originally milled

        • 2 years ago
          Anonymous

          No. They were originally sheet metal. Production problems had them switching to milled receivers but that was always a temporary measure. Then they switched back to sheet metal once the kinks were ironed out.

      • 2 years ago
        Anonymous

        >Nobody heralds the hk33 or FNC as a magical alternative to more modern designs with machined, forged, or extruded receivers. But somehow the AK is considered special.
        But Anon, even though those obsolescent western alternatives are better in almost every way, the AK is the bad guy gun therefore by contrarian logic it must be the superior rifle.
        Seriously though, I think only the CETME L and L85 are the only adopted western contenders for a worse assault rifle than the AK.

        • 2 years ago
          Anonymous

          The AK is at least reliable unlike the L85 and Cetmeme. Only real downside of the AK is its not as modular as the AR.

          • 2 years ago
            Anonymous

            >Only real downside of the AK is its not as modular as the AR.
            This. Also heavier, but more durable, and handles fat case and fat rim calibers a lot better.

            • 2 years ago
              Anonymous

              Most AKs are lighter than your average morons AR project.

              • 2 years ago
                Anonymous

                Yes but
                >https://www.vsevenweaponsystems.com/14-5-556-223-enlightened-smoke-composites-ar-rifle/
                also the WWSD is sub 5 lbs.
                The ar can get a lot lighter than the ak with modern materials and manufacturing techniques. However should the ak benefit from such development it would most likely end up at a similar weight. It's just that no one tried it yet.

              • 2 years ago
                Anonymous

                titanium AK would be cool

              • 2 years ago
                Anonymous

                Indeed it would. Or maybe a milled aluminium (or lithium-aluminium) receiver with an aluminium rear trunnion and steel front trunnion.

              • 2 years ago
                Anonymous

                i worry that using differing materials in the front trunnion and receiver will cause thermal expansion divergence issues

              • 2 years ago
                Anonymous

                If both materials have the same thermal properties, it should work well. Considering ar polymer uppers with internal barrel thread stainless steel insert exists, it shouldn't be a problem.

              • 2 years ago
                Anonymous

                >If both materials have the same thermal properties
                aluminum, titanium, and steel all expand at different rates
                >AR polymer uppers
                are hot garbage and are hardly used

              • 2 years ago
                Anonymous

                >aluminum, titanium, and steel all expand at different rates
                Yes but alloys could match do.
                >polymer uppers are hot garbage and are hardly used
                I have not found anyone on the net who owned them to support this statement.

        • 2 years ago
          Anonymous

          The CETME L wasn't that bad.
          Its just what you get for being a cheap ass and then doubling down on your mistaken and threatening soldiers when they try to actually fix issues.

      • 2 years ago
        Anonymous

        It just works

        • 2 years ago
          Anonymous

          It really doesn't

          • 2 years ago
            Anonymous

            Sorry you're poor/stupid and can only afford American made abominations.

      • 2 years ago
        Anonymous

        >It's a fuvking sheet metal rifle from the 40s.
        60's.

        • 2 years ago
          Anonymous

          what do you think the 47 means?

          • 2 years ago
            Anonymous

            >he thinks the AKM is the same thing as the AK 47
            Read a book Black person

            • 2 years ago
              Anonymous

              If you're going to move the goal posts, can you at least leave them somewhere on the field?

      • 2 years ago
        Anonymous

        It's "the people's rifle" for what it is, that being a mass produced stamped sheet metal rifle, it's fantastic, you can give it to a bunch of inexperienced conscripts, or goat farmers, and they can pull trigger and shoot bullet. The AK isn't "the best rifle ever" it's the best mass produced firearm ever. If your poor, stupid, and angry, the AK is your best friend. Also it's fun.

    • 2 years ago
      Anonymous

      Maybe you should watch the video before you say something stupid about it.

  3. 2 years ago
    Anonymous

    The KS-47 is the best AK ever made

  4. 2 years ago
    Anonymous

    >homosexual guntoober shill thread.
    kys OP.

  5. 2 years ago
    Anonymous

    Why do you love to make clickbait/fear mongering videos so much?

  6. 2 years ago
    Anonymous

    it's a tedious process meant to force poorgay consumers into buying domestic garbage and cope rifles
    that said, AK manufacturers need to shut the frick up and start making AK's in other calibers like 30-06 and 6.5 grendel

    • 2 years ago
      Anonymous

      >30-06
      Ok, boomer

      • 2 years ago
        Anonymous

        Bitch, what did you say about 30-06?

    • 2 years ago
      Anonymous

      It's a tedious process meant to prevent importation of scary assault guns.
      The fact that anyone persists and does it anyway is commendable, and it shows that the AK market would be significantly cheaper than they are if not for being forced to do 922r compliance. They'd probably be at PSAK price points.
      All that being said, 922r prevents me from easily getting eurojank so it needs to go.

    • 2 years ago
      Anonymous

      >AK's in other calibers like 30-06
      The Valmet Hunter was made in 30-06. You probably won't find a heftier AK bolt

  7. 2 years ago
    Anonymous

    I'm not an AK guy at all but God damn 922r is fricking bullshit.

    • 2 years ago
      Anonymous
    • 2 years ago
      Anonymous

      And the buren case decision would easily do away with that if some one is willing do something

  8. 2 years ago
    Anonymous

    Is there any reason to buy a modern production zastava if I can buy an ex fullauto surplus one here in europe? Is the quality comparable?

    • 2 years ago
      Anonymous

      yeah

    • 2 years ago
      Anonymous

      >Is the quality comparable?
      All the major parts are made on the same lines as the old ones, ex full auto surplus is just cooler.

      • 2 years ago
        Anonymous

        Got it, thanks. I'm probably going with a new production then as I don't really care for a full auto notch that I can't even use legally.

  9. 2 years ago
    Anonymous

    Could've removed imports

  10. 2 years ago
    Anonymous

    Are you fricking kidding me James? You just clickbaited me to a Zastava add you fricking shill? I will NEVER click your bullshit videos if they show up in my feed again, you act like a homosexual too.

  11. 2 years ago
    Anonymous

    AKs suck in general
    They were made for specific political situation and point in time. A gun that's optimized for production in communist sweatshops, with a population that lost all their give-a-frick and will never maintain the thing. All attempts to modernize the platform just slapped a bandaid on the issue.
    >it was always a shit gun
    >it will always be a shit gun
    >you are either a slaveboo or a contrarian if you like it

    • 2 years ago
      Anonymous

      What a shit take

      • 2 years ago
        Anonymous

        >"UGH you're like....SO wrong dude!"
        >doesn't elaborate further
        eat shit moron

        • 2 years ago
          Anonymous

          stop moaning, your post is essentially fuddlore mixed with a healthy dose of 16 year old's edginess and spending too much time on /misc/. ak is not a shit rifle nor was it made in "communist sweatshops". it's a military rifle made for an army that needed a lot of rifles, fast.

          • 2 years ago
            Anonymous

            you still have no argument.

            • 2 years ago
              Anonymous

              look shitling, there is no argument to be made as you didn't present any either, while the rest of your post is just plain moronation.

  12. 2 years ago
    Anonymous

    AK in general suck regardless of place of manufacture.

  13. 2 years ago
    Anonymous

    All this shilling against the AK - do trannies all get up at the same time or something?

    • 2 years ago
      Anonymous

      Trantifa loves their AKs.

      • 2 years ago
        Anonymous

        I’ve only ever seen them with ARs

        • 2 years ago
          Anonymous

          >inb4 tacticool girl(male)friend post
          Most antigay types are chronic poorgays with no ability to research or delay gratification to save money that buy a PSA AR or a fricking VSKA

        • 2 years ago
          Anonymous

          Except on their tee shirts

    • 2 years ago
      Anonymous

      >brings up trannies for no reason
      So this is/misc/ brain rot?

    • 2 years ago
      Anonymous

      Just poorgay zoomers mad they missed out on 500 dollar Saigas and 5.45 cheaper than .223

    • 2 years ago
      Anonymous

      gayr clone owners are made their rifles are worthless while AK's continue to climb in value, they are priced out.

      Not to mention it's been declared obsolete and being phased out of the U.S military.

      • 2 years ago
        Anonymous

        The M5 is mediocre at filling the role of a carbine, the best in it's class as a short marksman rifle, and completely moronic as a standard issue assault rifle. 6.8x51 will require a new doctrine. But even if the M5 is very mediocre, since the M250 appears to be a godsend, maybe ammo commonality and MG ubiquity will do the trick to compensate for all of the M5's flaws.

  14. 2 years ago
    Anonymous

    ?t=370

    aight fess up who is this i know it's someone in this thread

  15. 2 years ago
    Anonymous

    which one of you works at the factory?

    • 2 years ago
      Anonymous

      Not me.

  16. 2 years ago
    Anonymous

    give me a alternative western gun that can run steel case 762x39

    • 2 years ago
      Anonymous

      Ar15

      • 2 years ago
        Anonymous

        7.62x39 ar bolts last 900 to 2200 rounds (900 for a low-end one, 2200 for a fricking JP enhanced bolt) and magazines are even less reliable than the first-gen 30 round ar mags from the 70's. Also ars don't run steel cased ammo very well, Lake City developed a steel cased variety of m193 during the Vietnam war to reduce costs, and the project was cancelled.

  17. 2 years ago
    Anonymous

    Ranko smrdine, popuši mi kurac. Dosta vas je bilo na moj omiljeni jutub kanal.

  18. 2 years ago
    Anonymous

    Would you like AKs if you had like a Krebs Custom one or something of the same quality?

    • 2 years ago
      Anonymous

      No, because even with de-horning, I'd still have a rifle with some of the laziest designed notched sights ever produced, short sight radius, unintentional gas mask height over bore for a RDS, mags that do not fall free one handed, no bolt hold open, a stock length designed for hobbits, and a design clearly produced by a man who pleasures himself to the user getting poked, proded, and cut by every sharp edge and corner on the damn thing the moment you have to do any task with the rifle slung.

      I like the action. I like both x39 calibers. But that sheet metal receiver has to go. It's time to move on.

      • 2 years ago
        Anonymous

        Some of the Krebs models have a bolt catch built into the safety lever and address some of the other concerns. I agree with a lot of the sentiment though. Many higher quality, more expensive AKs don’t go through any modification or modernization at all until it gets to the user (should the user choose to modify it).

  19. 2 years ago
    Anonymous

    I Kate these homosexual thumbnails so fricking much.

    Why can't it just be a picture of an AK or something? Instead it's this gay fricking algorithm feed shit.

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *