Youtuber finally speaks what is on everyone's mind

  1. 3 weeks ago
    Anonymous

    Finally these retards aren't making cool cheap pistol scarce and are finally giving impulse buying retards shit advice.

  2. 3 weeks ago
    Anonymous

    It's almost as if the AK was never what it was cracked up to be

    • 3 weeks ago
      Anonymous

      It's a fuvking sheet metal rifle from the 40s. That's all. Nobody heralds the hk33 or FNC as a magical alternative to more modern designs with machined, forged, or extruded receivers. But somehow the AK is considered special.

      • 3 weeks ago
        Anonymous

        Ubiquity, that's all

      • 3 weeks ago
        Sieg

        Aks we're originally milled

        • 3 weeks ago
          Anonymous

          No. They were originally sheet metal. Production problems had them switching to milled receivers but that was always a temporary measure. Then they switched back to sheet metal once the kinks were ironed out.

      • 3 weeks ago
        Anonymous

        >Nobody heralds the hk33 or FNC as a magical alternative to more modern designs with machined, forged, or extruded receivers. But somehow the AK is considered special.
        But Anon, even though those obsolescent western alternatives are better in almost every way, the AK is the bad guy gun therefore by contrarian logic it must be the superior rifle.
        Seriously though, I think only the CETME L and L85 are the only adopted western contenders for a worse assault rifle than the AK.

        • 3 weeks ago
          Anonymous

          The AK is at least reliable unlike the L85 and Cetmeme. Only real downside of the AK is its not as modular as the AR.

          • 3 weeks ago
            Anonymous

            >Only real downside of the AK is its not as modular as the AR.
            This. Also heavier, but more durable, and handles fat case and fat rim calibers a lot better.

            • 3 weeks ago
              Anonymous

              Most AKs are lighter than your average retards AR project.

              • 3 weeks ago
                Anonymous

                Yes but
                >https://www.vsevenweaponsystems.com/14-5-556-223-enlightened-smoke-composites-ar-rifle/
                also the WWSD is sub 5 lbs.
                The ar can get a lot lighter than the ak with modern materials and manufacturing techniques. However should the ak benefit from such development it would most likely end up at a similar weight. It's just that no one tried it yet.

              • 3 weeks ago
                Anonymous

                titanium AK would be cool

              • 3 weeks ago
                Anonymous

                Indeed it would. Or maybe a milled aluminium (or lithium-aluminium) receiver with an aluminium rear trunnion and steel front trunnion.

              • 3 weeks ago
                Anonymous

                i worry that using differing materials in the front trunnion and receiver will cause thermal expansion divergence issues

              • 3 weeks ago
                Anonymous

                If both materials have the same thermal properties, it should work well. Considering ar polymer uppers with internal barrel thread stainless steel insert exists, it shouldn't be a problem.

              • 3 weeks ago
                Anonymous

                >If both materials have the same thermal properties
                aluminum, titanium, and steel all expand at different rates
                >AR polymer uppers
                are hot garbage and are hardly used

              • 3 weeks ago
                Anonymous

                >aluminum, titanium, and steel all expand at different rates
                Yes but alloys could match do.
                >polymer uppers are hot garbage and are hardly used
                I have not found anyone on the net who owned them to support this statement.

        • 3 weeks ago
          Anonymous

          The CETME L wasn't that bad.
          Its just what you get for being a cheap ass and then doubling down on your mistaken and threatening soldiers when they try to actually fix issues.

      • 3 weeks ago
        Anonymous

        It just works

        • 3 weeks ago
          Anonymous

          It really doesn't

          • 3 weeks ago
            Anonymous

            Sorry you're poor/stupid and can only afford American made abominations.

      • 3 weeks ago
        Anonymous

        >It's a fuvking sheet metal rifle from the 40s.
        60's.

        • 3 weeks ago
          Anonymous

          what do you think the 47 means?

          • 3 weeks ago
            Anonymous

            >he thinks the AKM is the same thing as the AK 47
            Read a book moron

            • 3 weeks ago
              Anonymous

              If you're going to move the goal posts, can you at least leave them somewhere on the field?

      • 3 weeks ago
        Anonymous

        It's "the people's rifle" for what it is, that being a mass produced stamped sheet metal rifle, it's fantastic, you can give it to a bunch of inexperienced conscripts, or goat farmers, and they can pull trigger and shoot bullet. The AK isn't "the best rifle ever" it's the best mass produced firearm ever. If your poor, stupid, and angry, the AK is your best friend. Also it's fun.

    • 3 weeks ago
      Anonymous

      Maybe you should watch the video before you say something stupid about it.

  3. 3 weeks ago
    Anonymous

    The KS-47 is the best AK ever made

  4. 3 weeks ago
    Anonymous

    >gay guntoober shill thread.
    kys OP.

  5. 3 weeks ago
    Anonymous

    Why do you love to make clickbait/fear mongering videos so much?

  6. 3 weeks ago
    Anonymous

    it's a tedious process meant to force poorfag consumers into buying domestic garbage and cope rifles
    that said, AK manufacturers need to shut the fuck up and start making AK's in other calibers like 30-06 and 6.5 grendel

    • 3 weeks ago
      Anonymous

      >30-06
      Ok, boomer

      • 3 weeks ago
        Anonymous

        Bitch, what did you say about 30-06?

    • 3 weeks ago
      Anonymous

      It's a tedious process meant to prevent importation of scary assault guns.
      The fact that anyone persists and does it anyway is commendable, and it shows that the AK market would be significantly cheaper than they are if not for being forced to do 922r compliance. They'd probably be at PSAK price points.
      All that being said, 922r prevents me from easily getting eurojank so it needs to go.

    • 3 weeks ago
      Anonymous

      >AK's in other calibers like 30-06
      The Valmet Hunter was made in 30-06. You probably won't find a heftier AK bolt

  7. 3 weeks ago
    Anonymous

    I'm not an AK guy at all but God damn 922r is fucking bullshit.

    • 3 weeks ago
      Anonymous
    • 3 weeks ago
      Anonymous

      And the buren case decision would easily do away with that if some one is willing do something

  8. 3 weeks ago
    Anonymous

    Is there any reason to buy a modern production zastava if I can buy an ex fullauto surplus one here in europe? Is the quality comparable?

    • 3 weeks ago
      Anonymous

      yeah

    • 3 weeks ago
      Anonymous

      >Is the quality comparable?
      All the major parts are made on the same lines as the old ones, ex full auto surplus is just cooler.

      • 3 weeks ago
        Anonymous

        Got it, thanks. I'm probably going with a new production then as I don't really care for a full auto notch that I can't even use legally.

  9. 3 weeks ago
    Anonymous

    Could've removed imports

  10. 3 weeks ago
    Anonymous

    Are you fucking kidding me James? You just clickbaited me to a Zastava add you fucking shill? I will NEVER click your bullshit videos if they show up in my feed again, you act like a gay too.

  11. 3 weeks ago
    Anonymous

    AKs suck in general
    They were made for specific political situation and point in time. A gun that's optimized for production in communist sweatshops, with a population that lost all their give-a-fuck and will never maintain the thing. All attempts to modernize the platform just slapped a bandaid on the issue.
    >it was always a shit gun
    >it will always be a shit gun
    >you are either a slaveboo or a contrarian if you like it

    • 3 weeks ago
      Anonymous

      What a shit take

      • 3 weeks ago
        Anonymous

        >"UGH you're like....SO wrong dude!"
        >doesn't elaborate further
        eat shit retard

        • 3 weeks ago
          Anonymous

          stop moaning, your post is essentially fuddlore mixed with a healthy dose of 16 year old's edginess and spending too much time on 4chan. ak is not a shit rifle nor was it made in "communist sweatshops". it's a military rifle made for an army that needed a lot of rifles, fast.

          • 3 weeks ago
            Anonymous

            you still have no argument.

            • 3 weeks ago
              Anonymous

              look shitling, there is no argument to be made as you didn't present any either, while the rest of your post is just plain retardation.

  12. 3 weeks ago
    Anonymous

    AK in general suck regardless of place of manufacture.

  13. 3 weeks ago
    Anonymous

    All this shilling against the AK - do trannies all get up at the same time or something?

    • 3 weeks ago
      Anonymous

      Trantifa loves their AKs.

      • 3 weeks ago
        Anonymous

        I’ve only ever seen them with ARs

        • 3 weeks ago
          Anonymous

          >inb4 tacticool girl(male)friend post
          Most antifag types are chronic poorfags with no ability to research or delay gratification to save money that buy a PSA AR or a fucking VSKA

        • 3 weeks ago
          Anonymous

          Except on their tee shirts

    • 3 weeks ago
      Anonymous

      >brings up trannies for no reason
      So this is4chan brain rot?

    • 3 weeks ago
      Anonymous

      Just poorfag zoomers mad they missed out on 500 dollar Saigas and 5.45 cheaper than .223

    • 3 weeks ago
      Anonymous

      gayr clone owners are made their rifles are worthless while AK's continue to climb in value, they are priced out.

      Not to mention it's been declared obsolete and being phased out of the U.S military.

      • 3 weeks ago
        Anonymous

        The M5 is mediocre at filling the role of a carbine, the best in it's class as a short marksman rifle, and completely retarded as a standard issue assault rifle. 6.8x51 will require a new doctrine. But even if the M5 is very mediocre, since the M250 appears to be a godsend, maybe ammo commonality and MG ubiquity will do the trick to compensate for all of the M5's flaws.

  14. 3 weeks ago
    Anonymous

    ?t=370

    aight fess up who is this i know it's someone in this thread

  15. 3 weeks ago
    Anonymous

    which one of you works at the factory?

    • 3 weeks ago
      Anonymous

      Not me.

  16. 3 weeks ago
    Anonymous

    give me a alternative western gun that can run steel case 762x39

    • 3 weeks ago
      Anonymous

      Ar15

      • 3 weeks ago
        Anonymous

        7.62x39 ar bolts last 900 to 2200 rounds (900 for a low-end one, 2200 for a fucking JP enhanced bolt) and magazines are even less reliable than the first-gen 30 round ar mags from the 70's. Also ars don't run steel cased ammo very well, Lake City developed a steel cased variety of m193 during the Vietnam war to reduce costs, and the project was cancelled.

  17. 3 weeks ago
    Anonymous

    Ranko smrdine, popuši mi kurac. Dosta vas je bilo na moj omiljeni jutub kanal.

  18. 3 weeks ago
    Anonymous

    Would you like AKs if you had like a Krebs Custom one or something of the same quality?

    • 3 weeks ago
      Anonymous

      No, because even with de-horning, I'd still have a rifle with some of the laziest designed notched sights ever produced, short sight radius, unintentional gas mask height over bore for a RDS, mags that do not fall free one handed, no bolt hold open, a stock length designed for hobbits, and a design clearly produced by a man who pleasures himself to the user getting poked, proded, and cut by every sharp edge and corner on the damn thing the moment you have to do any task with the rifle slung.

      I like the action. I like both x39 calibers. But that sheet metal receiver has to go. It's time to move on.

      • 3 weeks ago
        Anonymous

        Some of the Krebs models have a bolt catch built into the safety lever and address some of the other concerns. I agree with a lot of the sentiment though. Many higher quality, more expensive AKs don’t go through any modification or modernization at all until it gets to the user (should the user choose to modify it).

  19. 3 weeks ago
    Anonymous

    I Kate these faggy thumbnails so fucking much.

    Why can't it just be a picture of an AK or something? Instead it's this gay fucking algorithm feed shit.

Your email address will not be published.