What gun would you like to see reproduced or "cloned"

I would love to get a FG42 clone or repro that doesn't have a 4+ wait time and costing 9k.

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 4 weeks ago
    Anonymous

    FAMAS

    • 4 weeks ago
      Anonymous

      Springfield hellion already did that

      • 4 weeks ago
        Anonymous

        Doesn't count, only the VHS-1 externally resembled the FAMAS and the the VHS rifles have a completely different mode of operation. They also don't suck balls like the FAMAS, and part of the appeal of repros is getting an authentic experience
        >t. CETME L owner

        https://i.imgur.com/rf9lrCp.jpeg

        Shut up moron
        [...]
        FNC or HK-33. I realize Pindad has an FNC that is allegedly going to be imported but it's vaporware until it can be ordered. There are no more C93s being made and j don't think the most recent batch of kits have been built and resold as completed rifles. Again, we're allegedly getting these imported from Turkey some time in the future but I doubt it. CETME Ls are close but not the same thing.

        I'm in WA so it doesn't matter either way. Enjoy them for me bros.

        https://i.imgur.com/rf9lrCp.jpeg

        Shut up moron
        [...]
        FNC or HK-33. I realize Pindad has an FNC that is allegedly going to be imported but it's vaporware until it can be ordered. There are no more C93s being made and j don't think the most recent batch of kits have been built and resold as completed rifles. Again, we're allegedly getting these imported from Turkey some time in the future but I doubt it. CETME Ls are close but not the same thing.

        I'm in WA so it doesn't matter either way. Enjoy them for me bros.

        >There are no more C93s being made and j don't think the most recent batch of kits have been built and resold as completed rifles. Again, we're allegedly getting these imported from Turkey some time in the future but I doubt it.
        Yeah, I was gonna say MKE would be your best hope though they'd have to go for decently low prices to justify buying them over what scarce few C93s do pop up.
        If PTR wasn't moronic they would have made HK33s or a G41 lookalike instead of the abomination that is the PTR 63.

    • 4 weeks ago
      Anonymous

      Yeah. And its the only bullpup I'd buy.

    • 4 weeks ago
      Anonymous

      frf2 is the most French option
      if you want a good bullpup you have a VHS 1

  2. 4 weeks ago
    Anonymous

    Daily reminder that repro threads are just poorgay cope

    If you weren't poor you wouldn't need to clamour for a cheap repro

    • 4 weeks ago
      Anonymous

      Shut up moron

      https://i.imgur.com/JmJodKU.jpeg

      I would love to get a FG42 clone or repro that doesn't have a 4+ wait time and costing 9k.

      FNC or HK-33. I realize Pindad has an FNC that is allegedly going to be imported but it's vaporware until it can be ordered. There are no more C93s being made and j don't think the most recent batch of kits have been built and resold as completed rifles. Again, we're allegedly getting these imported from Turkey some time in the future but I doubt it. CETME Ls are close but not the same thing.

      I'm in WA so it doesn't matter either way. Enjoy them for me bros.

      • 4 weeks ago
        Anonymous

        Doesn't count, only the VHS-1 externally resembled the FAMAS and the the VHS rifles have a completely different mode of operation. They also don't suck balls like the FAMAS, and part of the appeal of repros is getting an authentic experience
        >t. CETME L owner
        [...]
        [...]
        >There are no more C93s being made and j don't think the most recent batch of kits have been built and resold as completed rifles. Again, we're allegedly getting these imported from Turkey some time in the future but I doubt it.
        Yeah, I was gonna say MKE would be your best hope though they'd have to go for decently low prices to justify buying them over what scarce few C93s do pop up.
        If PTR wasn't moronic they would have made HK33s or a G41 lookalike instead of the abomination that is the PTR 63.

        C93 are nice. There was so much arfcom and HK elitism on them they would sit on shelves for $600 all the way up to 2019. All had to do was check trunnion was welded correctly and barrel wasn't in at a cant. Can just eyeball those. Century contracted out to two builders where they were trash talking each other that fed into arfcom and HK fear on the builds where they'd candy pick the worst of the worse.

        Thumb grooves were Malaysian kits. Added bonus if the kit had the thumb grooves on the bolt and under 90k serial for the parts, they were German parts with German markings assembled my German engineers in Malaysia until Malaysia could get going. If they didn't have thumb grooves they were Thai.

        Remember two is one. One is none. Get two.

        • 4 weeks ago
          Anonymous

          thumb groove?

          • 4 weeks ago
            Anonymous

            This thing.

            https://i.imgur.com/lrXNaqK.jpeg

            >have you even ordered through the CMP or are you just talking shit like 99% of people?

            Yeah homosexual I have.

            Iron your flag. It looks disgusting like some sort of col... Nevermind.

            • 4 weeks ago
              Anonymous

              Ah neat, mine has that.

              • 3 weeks ago
                Anonymous

                Check serial on bolt and carrier. If it's under 90k should be able to find german proofing marks .

              • 3 weeks ago
                Anonymous

                Alright I'll check it in a bit. I assume the serial is completely different than the one on the receiver.

              • 3 weeks ago
                Anonymous

                Yeah. That'll be the serial of the original firearm before it was cut up. The receiver is the US made part and unrelated to the original parts.

              • 3 weeks ago
                Anonymous

                Alright I checked it. The bolt and carrier have different numbers. Both are well below 90k. The bolt is 14k range and the carrier is 3k range. That seems really low but it has two preceding zeros so it isn't shortened like some numbers on my mauser.

              • 3 weeks ago
                Anonymous

                Should be faint German proof markings on both of those. Top of bolt should have date code and proof mark And the top lip on the back of bolt that rides in the carrier

              • 3 weeks ago
                Anonymous

                man, now you're gonna make me go downstairs and pull it out of the safe again!

              • 3 weeks ago
                Anonymous

                Top of the bolt head is stamped BU. Inside it has the number 8 stamped.

        • 4 weeks ago
          Anonymous

          Ok but I just wanted to say that PTR is a bunch of mongloid low iq Black folk that can't make their G3s in the correct black finish instead of that godawful grey.

      • 4 weeks ago
        Anonymous

        Century has MKE 5.56 roller gun SKUs for awhile in their distributor list. Sounds like they're stuck in approval limbo though, along with the HK91 clones from MKE

    • 4 weeks ago
      Anonymous

      >If you don't want to take out a mortgage to own a real FG-42 or STG-44, you're poor.

      C'mon man.

    • 4 weeks ago
      Anonymous

      Anons say this then refuse to post their transferable $40k stg44 kwab

    • 4 weeks ago
      Anonymous

      Well made repros like the SMG made FG42s, Lugerman Lugers, or one of the SSD STG44s really aren't that expensive in the grand scheme of things if someone absolutely, positively HAS to have some weird obsolete German gun for their collection. Shit like those hideous STG cope clones PSA is supposedly making have absolutely no market. They're still too expensive for the morons demanding a cheap clone and they cut too many corners for someone who wants an actual reproduction.

    • 4 weeks ago
      Anonymous

      I just like old things, new things, and new old things.

    • 4 weeks ago
      Anonymous

      >poorgay cope
      Post bread on a strap of $100s

  3. 4 weeks ago
    Anonymous

    Luger. Please god, Lugers

    • 4 weeks ago
      Anonymous

      Lugerman makes them. You do have $5000 for an antiquated 9mm handgun, right?

  4. 4 weeks ago
    Anonymous

    there is only one answer

    • 4 weeks ago
      Anonymous

      I think PSA will do it one day.

    • 3 weeks ago
      Anonymous

      Actual good answer. I do not have $10k for a gun that not even fricking Battlefield Vegas can find parts for (they have an NDM and stopped renting it because of that).

      I think PSA will do it one day.

      I'll make fun of PSA for saying they'll do all these things they never end up doing but they did make a Chinese spiker-like AK with a good wood finish and new bayonets and their lower has been bretty good too, though mine is an H&R so it's not their cheapest option. Hopefully they actually go through with it. Also I've realized they own a lot more than just the Garand TDP after buying H&R. H&R did some survival rifles and stuff I didn't know about that I'd love to own. One of those survival rifles, which, believe it or not, Mike of NDS made a repro stock set that you could stick on a much more common Savage in .22lr IIRC. And now he runs H&R under PSA...I wonder if they considered that when buying H&R; might see some neat stuff if that's the case. If they really do make a Dragunov then I'll wait a couple months before considering it to see how it goes. I think the optics would be the biggest pain but I guess a rail adapter with a painted Leupold wouldn't be too heretical...

  5. 4 weeks ago
    Anonymous

    Pic related in not dead calibers would be sick

    • 4 weeks ago
      Anonymous

      yep,

    • 4 weeks ago
      Anonymous

      I want this in .350Legend

      • 4 weeks ago
        Anonymous

        that'd be fricking sick.

    • 4 weeks ago
      Anonymous

      It already exists.

      I can see it being popular in ban states.

    • 3 weeks ago
      Anonymous

      Hard to make a choice but knowing me, probably some autistic old .22 rifle like this HK 270 in .22LR.

      https://i.imgur.com/RARAUI4.jpeg

      yep,

      Also good answer. I would love to hunt coyotes with one. Considered one but every time I find one the stock and tang are buttfricked and it's like $800.

      https://i.imgur.com/S80IA2b.jpeg

      Krag-Jorgensen for me.
      I'd love to see it in a modern cartridge.

      I think it'd be neat to make a .22LR version. I dunno whether to scale the magazine to be itty bitty and short front to back or keep it full size.

      Jeff Cooper tried to get this off the ground back in the 90s but no manufacturer was interested. Even the Euro companies and smaller American semi-custom shops said there was just no market for it.

      Based, never knew that about him.

  6. 4 weeks ago
    Anonymous

    Em-2, famas, valmet/sako rk rifles, reproduction tokarev from tisas to be imported.

  7. 4 weeks ago
    Anonymous

    Mauser C96, I just want one to shoot and not feel guilty about putting wear on an antique

    • 4 weeks ago
      Anonymous

      Basically same. Some of these guns just need the 1911 or type 56 treatment of shitty repos in the proper caliber.

    • 4 weeks ago
      Anonymous

      Came here to say this. Either in 10mm or 5.7x28.

      • 4 weeks ago
        Anonymous

        .221 fireball or .300 blackout would be better. It's silly to build a pistol with the magazine outside of the handgrip and then use a cartridge that would fit inside a handgrip.

        • 3 weeks ago
          Anonymous

          >and then use a cartridge that would fit inside a handgrip.
          Every cartridge can fit inside a handgrip, silly anon.
          You're not a handlet, are you?

  8. 4 weeks ago
    Anonymous

    I just want a Uberti to make the 1849 with 5 and 6 inch barrels.

  9. 4 weeks ago
    Anonymous

    M1 Garand.
    Bonus points for an option that doesn't involve an oprod alongside it.

    • 4 weeks ago
      Anonymous

      Only morons who can't into the CMP want an M1 Garand repro. You can buy real M1s for significantly cheaper than any repro would ever cost. You just have to wait 3 to 6 months.

      I still regret buying a repro M1 Carbine because of my impatience.

      • 4 weeks ago
        Anonymous

        The CMP has been out of decent rifles for a long time, anon. It's bottom of the barrel now.

        • 4 weeks ago
          Anonymous

          I got mine two or three years ago and it's absolutely immaculate. I only ordered service grade too

          • 4 weeks ago
            Anonymous

            Oh shit, nice anon, and congrats. Have any pics?

            • 4 weeks ago
              Anonymous

              she's a lovely thing

      • 4 weeks ago
        Anonymous

        >wait 3 to 6 months.
        the wait time is like 1-2 weeks at the moment. it only spiked to like 2 months for about a year during covid. have you even ordered through the CMP or are you just talking shit like 99% of people?

        • 4 weeks ago
          Anonymous

          >have you even ordered through the CMP or are you just talking shit like 99% of people?

          Yeah homosexual I have.

          • 4 weeks ago
            Anonymous

            What happened to your toes? Did you get frostbite?

          • 4 weeks ago
            Anonymous

            >carries a taurus

            • 4 weeks ago
              Anonymous

              >carrying an expensive gun just for the police to keep in the evidence locker

              The gun is fine. It doesn't jam, and I've dropped it down a flight of metal steps with the safety off and it didn't go off. It was only $200 and came with a shitty laser sight, so the pigs can have it.

          • 4 weeks ago
            Anonymous

            Why are you black

          • 4 weeks ago
            Anonymous

            Hold still anon

          • 4 weeks ago
            Anonymous

            why are you black

      • 4 weeks ago
        Anonymous

        >wait times
        Lol. If you have current or former military experience and live in Alabama, Tennessee, or Georgia you can make the pilgrimage to talladega and hand pick your rifle the same day

        • 4 weeks ago
          Anonymous

          >live in Alabama, Tennessee, or Georgia

          Wow anon, it's almost like people live in different places. I ordered my M1 during COVID so yeah the wait time was longer. When I got my Enfield, it took about a month.

      • 4 weeks ago
        Anonymous

        How do you actually get into it? How much does it cost

      • 4 weeks ago
        Anonymous

        The CMP is long in the tooth, now it is all just beater rifles and random parts.

      • 4 weeks ago
        Anonymous

        Oh yeah let me go to a club that's three to four hours away from me, pay some shit club fee and then have the chance to choose a rifle that may or may not be aged like milk. Totally worth the effort and.money.

        • 4 weeks ago
          Anonymous

          >didn't just join the GCA
          I don't get why people like you are too fricking dumb to figure this out, it's not that hard and it doesn't require you to join any special in-person shooting club.

          • 4 weeks ago
            Anonymous

            I've never heard of the gca and have never heard anybody in my life talk about them. Please keep talking.

            • 4 weeks ago
              Anonymous

              If you've read up on anything related to the CMP, just about everybody says to join the GCA (Garand Collector's Association).
              It's $35 (used to be $25) and it counts as the club requirement for buying anything from the CMP so you don't have to join some random bullshit club in your area.

              • 4 weeks ago
                Anonymous

                I wouldn't even spoonfeed him (or anyone) about the CMP anymore. If people are too lazy to get some documents notarized and mail a letter, I have no sympathy for them.

          • 4 weeks ago
            Anonymous

            https://i.imgur.com/lrXNaqK.jpeg

            >have you even ordered through the CMP or are you just talking shit like 99% of people?

            Yeah homosexual I have.

            Only morons who can't into the CMP want an M1 Garand repro. You can buy real M1s for significantly cheaper than any repro would ever cost. You just have to wait 3 to 6 months.

            I still regret buying a repro M1 Carbine because of my impatience.

            I love that there's a government-funded program that allows Americans to buy and privately own retired military rifles. The USA might be a collapsing state that worships gay anal sex, but these vestigial remnants our greatness make me smile. I hope that in like 500 years, there's some based country selling refurbished man-portable railguns to its citizens.

            • 3 weeks ago
              Anonymous

              The cmp has not been associated with the u.s. government since the 1960s unfortunately and the government has opted to rather destroy its or sell its surplus to other countries rather than to civilians since the 70s

  10. 4 weeks ago
    Anonymous

    You don't want an actual reproduction. You want a vaguely FG42 shaped gunko pop.

    • 4 weeks ago
      Anonymous

      Time to shut the frick up

  11. 4 weeks ago
    Anonymous
    • 4 weeks ago
      Anonymous

      the ar is what happens when you let noguns make guns

    • 3 weeks ago
      Anonymous

      >saves literally less space than just separating the uppers and the handguards are now 4 pieces cuz lol
      MIIIIIKE. I need one!

      An accurate SPAS-12 bodykit for an actual decent shotgun. Some madlad is actually working on it on a Benelli forum.

      No shit, link? I want a good folder for my 870 and I've even considered doing unspeakable things to an airsoft folding stock but nothing really cropped up yet.

  12. 4 weeks ago
    Anonymous
  13. 4 weeks ago
    Anonymous

    I just want a Model 2 that isnt in .32 Rimfire

    • 4 weeks ago
      Anonymous

      I'd like to see more spur triggered revolvers in general. I guess it's a tough sell to the lawyers and marketing.

  14. 4 weeks ago
    Anonymous

    the H&R999 is due for a reissue. them going for $600+ in decent condition is high enough that for a new one with support people would probably pay $800-1000, which would make it competitive with the GP100 22lr and S&W 617.

  15. 4 weeks ago
    Anonymous

    Early colt and smith double actions

  16. 4 weeks ago
    Anonymous

    In no particular order:
    >HK 770
    >HK P7
    >Webley top-break revolver (any model, just in a modern cartridge)
    >Colt Shooting Master
    >Colt Detective Special (instead we got the 2017 Cobra)
    >Colt Magnum Carry (the King Cobra Carry but without the hideous rollmark)
    I like HKs and revolvers

  17. 4 weeks ago
    Anonymous

    An accurate SPAS-12 bodykit for an actual decent shotgun. Some madlad is actually working on it on a Benelli forum.

  18. 4 weeks ago
    Anonymous

    >What gun would you like to see reproduced or "cloned"
    the Sunngard, just for absolute shits and giggles

  19. 4 weeks ago
    Anonymous

    m1 carbine chambered in 5.7 Johnson

  20. 4 weeks ago
    Anonymous

    italian nuova jager already makes stg44 1:1 repros. sadly they are chambered in the same caliber as the original but at least they are reliable if you can stomach the 0.90cpr

    • 4 weeks ago
      Anonymous

      >sadly they are chambered in the same caliber as the original
      why the frick would you want a repro of any gun if it wasn't chambered in the proper cartridge

      • 4 weeks ago
        Anonymous

        because the price of 8mm kurtz is rising week by week? It's a repro, even if it a 1:1 copy it still holds zero historical value and it's made to shoot. A more common caliber like 7,62x39 or .300 blk would make more sense.

        • 3 weeks ago
          Anonymous

          >It's a repro... it still holds zero historical value
          So why do you want it instead of a modern production gun?

          • 3 weeks ago
            Anonymous

            huh? To enjoy shooting it? A real stg44 costs like 4-5k euros and if a parts break you're shit out of luck, a modern repro costs 1500-2000€ and you can enjoy larping as a nazi at the range while plinking without remorse

            • 3 weeks ago
              Anonymous

              You want a historical gun to shoot because you like the historical aspect, even though it has no historical value by your own admission? You want it in some random modern caliber because the original is too expensive and it has no historical value so it doesn't matter?
              Why not just put an airsoft shell around a 10/22 and call it good?
              >ree that's not historically accurate

    • 4 weeks ago
      Anonymous

      Do they export to the US? I've never seen them before

      • 4 weeks ago
        Anonymous

        No, but they couldn't export it anyway in the original configuration due to US import laws. And due to what happened in the last few years the american market is unappealing for anyone who isn't beretta in Italy.

        • 3 weeks ago
          Anonymous

          It'll only be a matter of time before they become a subsidiary of Beretta. Somebody needs to @ one of the Beretta heirs on social to buy them out to all to the Beretta cheddar.

          • 3 weeks ago
            Anonymous

            >It'll only be a matter of time before they become a subsidiary of Beretta
            It wouldn't make sense for beretta to buy them. They import milsurp and make basic b***h ARs, sometime for some small SOF groups meanwhile Beretta is a main supplier for both rifles and DHU systems for both the army and local police.
            Beretta usually looks to eat bigger fishes that can complement their lineup, look at when they bought Sako when they were on the verge of destruction due to meddling of the finnish govt.

  21. 4 weeks ago
    Anonymous

    The reproduction guns I’m interested in are the girls from upotte.

  22. 4 weeks ago
    Anonymous

    Volcanic Pistol in .45 acp
    hell, I'll take 9mm
    I just want a volcanic Pistol I can actually shoot

  23. 4 weeks ago
    Anonymous

    Stoner 63

  24. 4 weeks ago
    Anonymous

    Krag-Jorgensen for me.
    I'd love to see it in a modern cartridge.

    • 4 weeks ago
      Anonymous

      Jeff Cooper tried to get this off the ground back in the 90s but no manufacturer was interested. Even the Euro companies and smaller American semi-custom shops said there was just no market for it.

    • 4 weeks ago
      Anonymous

      8.6blk Krag carbine with wood stock, red dot, and suppressor. Absolute deer& hog slayer

  25. 4 weeks ago
    Anonymous

    HK33

    • 4 weeks ago
      Anonymous

      I want a HK33K. I love the aesthetic.

  26. 4 weeks ago
    Anonymous
  27. 4 weeks ago
    Anonymous

    A stamped AR-180, Leader T2 Mk.5, or SAR 80.

  28. 4 weeks ago
    Anonymous

    Lmao this thread is a great example of why this shit almost never fricking works out.
    >I want a reproduction of <old gun>!
    >But in a completely different chambering than what it was engineered around!
    >And it has to take Glock/AR magazines!
    >And be setup for optics!
    >And it has to cost less than a bargain basement PSA!

    • 4 weeks ago
      Anonymous

      I've wanked over the Steyr M1912 for so long, one of the few actually clip fed pistols that I can use to temporarily trigger autistic gun owners. Thankfully German versions in 9mm Para exist so ammo isn't a concern, but I'd sure as hell get one in 9mm Steyr too. Also I want the Dryse/Chasspot needle rifles for the ultimate non-metallic cartridge experience that you can't get from anything else.

      It's exactly like how old/niche franchises are "modernized/reimagined/corpo sterilized into unrecognizable sludge" for modern normies. Repro guns are a niche of a niche of a niche and anyone with sufficient autism to actually buy one will be the type to not accept any compromises, with the possible exception of invisibly tweaking the design so that the little quirks and oddities meant to compensate for older manufacturing techniques are removed for usability's sake. Larper/Reenactor autism is as strong as historical autism gets and they're sure as hell not gonna waste their money on an STG-44 chambered in 7.62*39 or fricking .22LR, not when they could get one in the original 8mm kurz. They won't shoot it much but when they do you better believe they're gonna make it an event.
      Modernizing a late 19th/20th century gun just makes it into a shittier version of a modern gun. Historical guns should be enjoyed as they were and as they are, even at the cost of practicality and easy accessibility. Dumbing down Dwarf Fortress doesn't result in Rimworld, it just gets you a shitty version of Dwarf Fortress.

    • 4 weeks ago
      Anonymous

      This exact argument seems to appear in every single thread where historical repro guns are even so much as mentioned what an extraordinary coincidence

    • 3 weeks ago
      Anonymous

      I just wanted tisas tokarevs to be imported because we don't get the 9mm and 7.62 reproduction we get zero reproductions and I don't like wearing my toks to much on hard berdan primer ammo.

      A stamped AR-180, Leader T2 Mk.5, or SAR 80.

      Ar18/180 in retro upper and a 180 stamped lower are all I want for rifle repos but Brownells denied us this.

      • 3 weeks ago
        Anonymous

        The very least, I'd be content with a retro handguard, a front sight gas block, and a rear sight to match with it. Maybe PSA could collaborate with Serbu to get the Diablous going, but that's wishful thinking.

  29. 4 weeks ago
    Anonymous

    modernized luger and mauser c96

    • 3 weeks ago
      Anonymous

      Why bother modernizing those at all honestly?

      • 3 weeks ago
        Anonymous

        because it would be cool
        and because so many 2011s exist

  30. 3 weeks ago
    Anonymous

    >What gun would you like to see reproduced or "cloned"

    Modernized LeMat chambered for 38 SPL/357 Mag and either 410 or 20 gauge for the center shotgun barrel.

  31. 3 weeks ago
    Anonymous

    PSA needs to release a modernized Renault tank and parts kits with composite armour and a built in 50bmg rifle that closely resembles the original main cannon to skirt around certain explosives laws.

  32. 3 weeks ago
    Anonymous

    I'd enjoy a repro Gewehr 43 because the gas system on the original was designed to be slightly better than a pile of hot garbage.

Your email address will not be published. Required fields are marked *