Until 3D printing ammo becomes viable 3D printed guns are just a fun gimmick.

Until 3D printing ammo becomes viable 3D printed guns are just a fun gimmick. The average Joe can't just source ammunition in a noguns country.

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 4 weeks ago
    Anonymous

    ummm.
    I can just buy ammo at the store, but also you are wrong.

    • 3 weeks ago
      Anonymous

      Black powder and smokeless are regulated in most of yurop and in all third world countries

  2. 4 weeks ago
    Anonymous

    yeah

  3. 4 weeks ago
    Anonymous

    largely true
    3d printed gun development has largely been a massive circlejerk. it's all just lowers for collector's kits rn

    as for ammo, there are workarounds like ramset power loads, and reloading, but in places i totally do not live like australia, it's a ridiculously large investment to get reloading equipment. and almost certainly monitored.

    shotgun cartridges are probably the most viable in terms of conventional ammunition but i'm guessing people are going to have to get more creative with pneumatic stuff if we want anything more precise

    • 4 weeks ago
      Anonymous

      >largely
      >largely
      >large
      i'm a few beers deep gentlemen forgive my abuse of the lovely english language

    • 3 weeks ago
      Anonymous

      You can make 3d printed guns that can fire black powder ignited by a wire. No premade ammo required.

      Black powder and smokeless are regulated in most of yurop and in all third world countries

      Anyone who can piss can make black powder.

      • 3 weeks ago
        Anonymous

        wow that sounds really useful
        i'm sure that's feasible in a conflict scenario

        • 3 weeks ago
          Anonymous

          I dunno, OP's pic has actually been used in conflicts in its intended role, even under extreme import controls.

          • 3 weeks ago
            Anonymous

            OP's pic is also not a "3d printed gun that fires black powder ignited by a wire"

            https://i.imgur.com/C2C4hkP.jpg

            Anon the former head of state of one of the world's most gun restricted and wealthy countries was shot to death in broad daylight by a fricking electric blunderbuss.

            Assassinations are not war and you are very silly for attempting to equate them.

            it was feasible in 11th century china and that was before they had invented the wheel

            We are not in 11th century China. I am not fighting another moron with a firework stick. I am fighting Minimis.

            • 3 weeks ago
              Anonymous

              you aren't making a strong argument that ammo is actually impossible to get, just inconvenient or possibly illegal, which is kind of irrelevant when you are talking about making guns where it's illegal.

              • 3 weeks ago
                Anonymous

                Then you can apply that argument to guns. And so I might as well just illegally buy or steal a gun, and you might as well just steal an automatic weapon. It's stupid and defeatist.

                I cannot walk into a shop and buy a gun without a licence. I cannot buy ammunition without a licence. The risks of LE intervention should I attempt to purchase an actually useful firearm/ammo outside of the law are so ridiculously high I cannot consider them. Therefore, I must think of other ways of procurement. Hence, manufacture with deniable materials.

              • 3 weeks ago
                Anonymous

                do you live somewhere nitric acid isn't controlled
                where you wouldn't get arrested for printing a gun?
                where you wouldn't get arrested for having firearm manufacturing files?
                where making a barrel is illegal?
                etc.
                the soi-whinging about 3d printing is nonsense because at some point you start breaking the law and all the tools are illegal as is the intent.
                >nooooo I can't break this particular law!!1!1!
                you are making a gun to kill people, I would posit that breaking the law is on the table.

              • 3 weeks ago
                Anonymous

                You seem to think my issue is with any particular law and not the fact that different activities have different levels of risk. It's not black and white. Use your brain.

              • 3 weeks ago
                Anonymous

                why did you have to undermine your argument by giving a bunch of DOGSHIT examples?
                >where you wouldn't get arrested for printing a gun?
                how do the cops know you've printed a gun?
                >where you wouldn't get arrested for having firearm manufacturing files?
                how do the cops know you have certain files on your computer?
                >where making a barrel is illegal?
                how do the cops know you just made a barrel?

              • 3 weeks ago
                Anonymous

                yeah, you definitely don't have to worry about what you download online.
                goddamn you noguns are stupid..

        • 3 weeks ago
          Anonymous

          Anon the former head of state of one of the world's most gun restricted and wealthy countries was shot to death in broad daylight by a fricking electric blunderbuss.

        • 3 weeks ago
          Anonymous

          it was feasible in 11th century china and that was before they had invented the wheel

  4. 4 weeks ago
    Anonymous

    but Myanmar

  5. 4 weeks ago
    Anonymous

    however Im just looking for fun. and why do you care so much about other people making guns out of USA ?

  6. 3 weeks ago
    Anonymous

    suckboy tony is doing some interesting stuff with fully 3d printed cases, blackpowder and electric ignition. hopefully it becomes somewhat viable eventually.
    https://odysee.com/@SuckboyTony:2/plasma-pump-cad-breakdown:c
    https://odysee.com/@SuckboyTony:2/7-rounds-out-of-an-electrically-ignited:d

  7. 3 weeks ago
    Anonymous

    Bruh it's being done already.
    https://twitter.com/SuckBoyTony1
    Ignore the odd name
    And
    https://odysee.com/@elwildo14:1?view=content

  8. 3 weeks ago
    Anonymous

    I think the real limiting factor is going to be making stable nitrocellulose propellants at home. Primers can be replaced with electric ignition and we already have polymer cases so that part will probably be taken care of soon enough. Until we have a way to make consistent and reliable smokeless powder 3d printed guns are only going to be useful in places where it's already easy to get ammo

  9. 3 weeks ago
    Anonymous

    Are .22 blanks for Hitli guns regulated in Yuropooristan? Would it be possible to modify specific types of dummy cartridges?

  10. 3 weeks ago
    Anonymous

    I have an older ender3 my buddy gave to me when he upgraded.
    Its cool but i hate messing around with it and relevling the bed and troubleshooting in general.
    How close can i get to making this plug and play? Is it a fools errand and instead should just save up for like a bambu or something else?

Your email address will not be published. Required fields are marked *