Uni DIY Projects

Hello I recently began University and became a supervisor over student workers. We have a list of task we must complete and follow up on. One such task is covering up this hole in the wall. How would we go about closing this up? I appreciate any help given.

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 1 year ago
    Anonymous

    Cardboard, duct tape, plaster, paint. Make the cardboard structurally sound.
    You need a brush and a scraper too. A sponge to texture paint if necessary.

  2. 1 year ago
    Anonymous

    Put a cupboard door. A door is absolutely essential. If you close that hole with plaster/whatever, you're a Black person because you haven't assessed the situation. Why is their a hole in the first place ? Because obviously a Black person thought it was ok to put that surely essential valve/junction/thing behind a solid wall then some dign human bloke figured out where that valve was and broke the wall to access it. You don't want to be the Black person the next dign human bloke needing to access the valve will curse upon breaking that damn wall for a second time. Because you're better than that anon.

    • 1 year ago
      Eddie

      Bet we spoke and agreed the cupboard idea would be the best solution. Seeing how the wall is setup though would the hinge

      Just cut a piece of matching plywood and slap it on with a piano hinge

      work best or would I have to make a addon to it?

      Be college city slicker.
      >ask county bumpkins how to fix stuff even though it is YOUR task
      The absolute state of "education"

      I am also a country bumpkin I was just given the opportunity to go back to school and I'm trying to make the most of it.

  3. 1 year ago
    Anonymous

    Just cut a piece of matching plywood and slap it on with a piano hinge

  4. 1 year ago
    Anonymous

    Get this printed on a poster and tape it over the hole

  5. 1 year ago
    Anonymous

    ask a stupid question on diy you get what you deserve.

  6. 1 year ago
    Anonymous

    Be college city slicker.
    >ask county bumpkins how to fix stuff even though it is YOUR task
    The absolute state of "education"

    • 1 year ago
      Anonymous

      Agreed, I'm so tired of these top-hatted capitalists and trust-fund babies coming here from Ebaumsworld and mocking our humble rural ways with their fancy words and velvet breeches. If OP wants to learn DIY, he'll learn the way we all did, by spending 10 years here as an apprenctice, shitposting about shipping containers, imitation crab meat, 500ft deep holes, dock construction/invoicing, and homemade diving bells made from soda cans and JB Weld.

      Then he'll graduate to Journeyman, the CONSOOMER stage, where he'll spend another ten years acquiring a $30,000 Snap-on tool chest full of $10,000 of perfectly matching color-coordinated power tools, pristine and unused, after the Sorting Hat decides whether he belongs to Milwaukee, Makita, or Ryobi House.

      Only then, finally at long last he will achieve the rank of Master after completing his first actual DIY repair, which could be something as simple as spraying WD-40 into a squeaky cabinet hinge, using a piece of cardboard to level a wobbly table, or--if he's REALLY good--assemble an Ikea end-table with one of those wonky little wrenches.

      This is the way.

  7. 1 year ago
    Anonymous

    >cardboard
    >duct tape
    >draw a penis on it with a magic marker
    >spend the rest of your budget on weed and Pez
    College.

  8. 1 year ago
    Anonymous

    This board needs a "Hole in Drywall general" thread. But seriously, Just youtube it, its very easy.

    • 1 year ago
      Anonymous

      its not drywall, if you look closely its plaster and lathe. you uneducated dicknipple

  9. 1 year ago
    Anonymous

    If you're the supervisor then tell the other students to do it

  10. 1 year ago
    Anonymous

    That's a two freshmen job, three depending on how hard you manage to stuff them in with your boot.
    Then just plaster over whilst ignoring their whines for help.

  11. 1 year ago
    Anonymous

    >became a supervisor over student workers
    >doesnt know how to patch a fricking hole in a wall

    the frick kind of shitty U you at that allows morons to supervise students? you are a disgrace.

  12. 1 year ago
    Anonymous

    >How would we go about closing this up?

    • 1 year ago
      Anonymous

      the door is not on right. could you have at least shooped it in the right orientation to the wall? you moron

      • 1 year ago
        Anonymous

        >could you have at least shooped it in the right orientation to the wall?
        could you have at least rotated the image before posting?

        • 1 year ago
          Anonymous

          the hinges are on the bottom. no matter how you rotate the pic the hinges are still facing the floor meaning it would open down instead of to the left like it should according to the knob on the door. you are a fricking moron

        • 1 year ago
          Anonymous

          see

          the hinges are on the bottom. no matter how you rotate the pic the hinges are still facing the floor meaning it would open down instead of to the left like it should according to the knob on the door. you are a fricking moron

          and pic related

  13. 1 year ago
    Anonymous

    "how fix____???"

    tard

  14. 1 year ago
    Anonymous

    screw a piece of plywood over it and paint it.

  15. 1 year ago
    Anonymous

    attach paint stirrer behind dry wall, slam a screw through the drywall and paint stirrer, use wood stirrer as mount point. mud tape mud sand paint.

  16. 1 year ago
    Anonymous

    Ok - Can I ask why this is your task? Do you possess any skills/knowledge in this area?
    (is it tangentally related to your field of study?)

    Wouldn't your insititution have a groundworks/maintaince team?

    If you're lacking in equpiment I'd consider finding a picure frame, that way the hole would be squared up, and you'd have a bit of a lip for fixings

Your email address will not be published. Required fields are marked *