So, I'm looking for a rail system for my ak. I find side rails fugly, but will settle for one if need be.

So, I'm looking for a rail system for my ak. I find side rails fugly, but will settle for one if need be. was looking at something similar to whats in my pic, but
idk if they suck or if they are for tacticool noobs

Any input ?

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 1 year ago
    Anonymous

    These fricking suck and don’t hold zero, just use the side rail.

    • 1 year ago
      Anonymous

      fpbp
      these are fine for airsoft or something but top rail have always been regarded as lowquality either due to fit and wobble since they tend to be generic sized and made by companies like UTG or "literally who"

  2. 1 year ago
    Anonymous

    the only system like that that holds zero is the one by krebs. but if your rifle already has the side rail then just get a side mount, it's much simpler and a good one (rs regulate, master mount) will hold zero like a champ.

  3. 1 year ago
    Anonymous

    PSA sells some of their AKs with them, but I don't know if you can buy them on their own. FAB Defense has one, but I have heard of problems with that one, though it's being used a lot in Ukraine. Midwest has a new one out now, but it's pricey.

  4. 1 year ago
    Anonymous

    Side rail, beryl rail, sureshot chassis, zent shit
    Anything else is a meme

  5. 1 year ago
    Anonymous

    https://akmastermount.com/product/ak-master-mount-side-rail/

  6. 1 year ago
    Anonymous

    Assuming you have a side rail to mount them,
    >best
    RS Regulate (note: these are modular so do a little bit of research before buying so you get the best setup for your use)
    >better
    Midwest Industries
    >okay
    Master Mount
    >great but unobtanium and expensive
    K-Var KV-04S
    Zenitco B-13
    >decent but hard to find and super high height over bore
    BelOMO side rail to weaver mount

  7. 1 year ago
    Anonymous

    Texas Weapon Systems Dog Leg Rail. You're welcome. homosexual.

  8. 1 year ago
    Anonymous

    To echo everyone here, just get a quality side rail, you’ll be glad for something that locks down solid and holds true. If you’re going to put a small dot or something you can get a minimalist rail. Just make sure it has a good locking system. I also don’t like the looks of a side rail but I wanted a sure thing

  9. 1 year ago
    Anonymous

    For any fellow AK autists that this thread might attract, a scope that attaches to an SVD-style side mount will work for and hold zero on a Yugo/Serbian side rail.

  10. 1 year ago
    Anonymous

    if your optic uses a pic or acog mount then
    Master Mount > RS Regulate > Midwest Industries > everything else
    but if you need some specialty mount (burris fastfire, leupold deltapoint, etc) then
    RS Regulate > Master Mount > Midwest Industries > everything else

    • 1 year ago
      Anonymous

      >Master Mount > RS Regulate
      why do you think this? i've had both and think the rs regulate is much less finicky to get tight to the rifle, and the ability to center it over the bore is nice.

      • 1 year ago
        Anonymous

        they tighten the exact same way, the only difference is the master mount has finer increments on the nut. the master mount is superior because it has a better lockup in the center notch of the rail plate, and because it has fewer separate pieces between the rifle and optic, so fewer things to potentially go wrong.
        >ability to center
        it's a useless feature intended to attract the autistic. it really doesn't matter if your optic is 1/8" off center, not even if you're 'shooting at 1000 yds with it regularly. assuming you zero at 100 yds then you'll only have 1.24" of deviation at 1000 yds due to the offset, which will be lost in the noise.

        • 1 year ago
          Anonymous

          glad you like them. i always found the master mounts more of a relative pita to get properly tight

  11. 1 year ago
    Anonymous

    WHY YOU WANT RAIL FOR KALASHNIKOV? IS NOT GOOD ENOUGH AS PROCUREDAND FROM IZHEVSK MECHANICAL WORKS? YOU THINK NEEDS IMPROVEMENT? THEN MAYBE YOU FIND JOB WITH ARMY OF RUSSIA! YOU HAVE DRINKS WITH MIKHAIL KALASHNIKOV, TRADE STORY OF MANY WEAPONS DESIGNED DETAILS OF SCHOOL FOR ENGINEERING!

    OR MAYBE YOU NOT DO THIS. PROBABLY IS BECAUSE YOU NEVER DESIGN WEAPON IN WHOLE LIFE. YOU LOOK AT FINE RUSSIAN RIFLE, THINK IT NEED CRAZY SHIT STICK ON ALL SIDES OF WEAPON. YOU HAVE DISEASE OF AMERICAN CAPITALIST, CHANGE THING THAT IS FINE FOR NO REASON EXCEPT TO LOOK DIFFERENT FROM COMRADE. YOU PUT CHEAP FLASHLIGHT OF CHINESE SLAVE FACTORY ON ONE SIDE, YOU PUT BAD SCOPE OF AMERICAN MIDDLE WEST ON OTHER SIDE, YOU PUT FRONT PISTOL GRIP ON BOTTOM SO YOU ARE LIKE AMERICAN MOVIE GUY JOHN RAMBO. MAYBE YOU PUT SEX DILDO ON TOP TO FRICK YOURSELF IN butthole FOR MAKING SHAMEFUL TRAVESTY OF RIFLE OF MIKHAIL KALASHNIKOV, NO?

    RIFLE IS FINE. YOU FRICK IT, IT ONLY GET HEAVY AND YOU STILL NO HIT LARGEST SIDE OF BARN. GO TO FIRING RANGE, PRACTICE WITH MANY MAGAZINE OF CARTRIDGE. THEN YOU NOT NEED DUMB SHIT PUT ON SIDE OF RIFLE.

    • 1 year ago
      Anonymous

      Oh hey, Ivan came back

  12. 1 year ago
    Anonymous

    My ultimak holds pretty well. Shit does get hot for optics.

  13. 1 year ago
    Anonymous

    Why you want rail for Kalashnikov? Is not good enough as procured from Izhevsk Mechanical Works? You think needs improvement? Then maybe you find job with army of Russia! You have drinks with Mikhail Kalashnikov, trade story of many weapons designed and details of school for engineering!

    Or maybe you not do this. Probably is because you never design weapon in whole life. You look at fine Russian rifle, think it need crazy shit stick on all sides of weapon. You have disease of American capitalist, change thing that is fine for no reason except to look different from comrade. You put cheap flashlight of Chinese slave factory on one side, you put bad scope of American middle west on other side, you put front pistol grip on bottom so you are like American movie guy John Rambo. Maybe you put sex dildo on top to frick yourself in butthole for making shameful travesty of rifle of Mikhail Kalashnikov, no?

    Rifle is fine. You frick it, it only get heavy and you still no hit largest side of barn. Go to firing range, practice with many magazine of cartridge. Then you not need dumb shit put on side of rifle.

    • 1 year ago
      Anonymous

      literally 6 posts up

      • 1 year ago
        Anonymous

        >Why you want rail for Kalashnikov? Is not good enough as procured from Izhevsk Mechanical Works? You think needs improvement? Then maybe you find job with army of Russia! You have drinks with Mikhail Kalashnikov, trade story of many weapons designed and details of school for engineering!
        >Or maybe you not do this. Probably is because you never design weapon in whole life. You look at fine Russian rifle, think it need crazy shit stick on all sides of weapon. You have disease of American capitalist, change thing that is fine for no reason except to look different from comrade. You put cheap flashlight of Chinese slave factory on one side, you put bad scope of American middle west on other side, you put front pistol grip on bottom so you are like American movie guy John Rambo. Maybe you put sex dildo on top to frick yourself in butthole for making shameful travesty of rifle of Mikhail Kalashnikov, no?
        >Rifle is fine. You frick it, it only get heavy and you still no hit largest side of barn. Go to firing range, practice with many magazine of cartridge. Then you not need dumb shit put on side of rifle.

  14. 1 year ago
    Anonymous

    side rails are fugly but that thing isn't?

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *