Revolvers apparently don't do well with bottleneck cartridges, but it's been done with .223.
they need some special work done with the barrel face / cylinder gap because high velocities are pretty tough on that area specifically, and there's no silver bullet >smaller gap
higher velocity and pressure gases mixed with a little residue or unburnt powder squeezed through the barrel gap sandblasts the shit out of the barrel face >larger gap
you lose a lot of velocity which defeats the purpose of using a high velocity cartridge
6.8 Rem short stroke piston semi-auto bullpup rifle.
It'll use aluminum and polymer for a lighter weight, and polygonal rifling.
Then ummmm >Snort
A short rail on the bottom and a longer one on top, and it'll take M16 bayonets.
6.8 Rem short stroke piston semi-auto bullpup rifle.
It'll use aluminum and polymer for a lighter weight, and polygonal rifling.
Then ummmm >Snort
A short rail on the bottom and a longer one on top, and it'll take M16 bayonets.
*SNOOORRRTTTTTTT*
Alright uhh....
STG 57
but in uhhh 350 legend
WITH
*coughs blood*
pump-action actuated by the pistol grip, like that
*gets a child custody subpoena over text*
Like the kvk 62
... and with a hello keltec anime keychain off the pistol grip UwU
*has stroke*
*Cuts a line with credit card
Alright, hear me out, guys.
A bullpup with a longstroke piston, chambered in 10mm, 5.7,mm, 6.8 spc, 7.62x31mm, or 5.56 NATO
The whole thing will have kits that let's you just buy one receiver and >snorts
swap out the barrel and use a kit that let's you change the magazine size.
WHOO!
And we're gonna put an integral optic on a carry-handle, thread the barrels for suppressors or muzzle devices.
you FOOL
That is TOO CONVIENENT
... unless we'll use the same springs for that ar-18 bullpupp that we use on the sub-2000 that wear out after 2500 rounds
... then GENIUS!!!!
A polymer striker fired handgun
HERETIC
ONLY if it is break open like the beretta cheetah but SINGLE SHOT BLACK POWDER
>bubblebubblebubblebubblebubble >....exhales....COUGH hack COUGH.. >Damn...
Ok, so hear me out brothers and sisters, what if we like made guns out of, like...wood and steel? Yeah, I know its far out but catch my groove man...take the wood, right? It's like, a renewable resource. Positive vibes man. And the steel, that stuff's recycled all the time man.
break-action polymer revolver chambered in 5.7 with swappable cylinders
How about it chambers 5.7 and .22 magnum, like the medusa? One firing pin for centerfire, another for rimfire
i can dig it
honestly 5.7 as a revolver cartridge has always interested me as a concept
Revolvers apparently don't do well with bottleneck cartridges, but it's been done with .223.
they need some special work done with the barrel face / cylinder gap because high velocities are pretty tough on that area specifically, and there's no silver bullet
>smaller gap
higher velocity and pressure gases mixed with a little residue or unburnt powder squeezed through the barrel gap sandblasts the shit out of the barrel face
>larger gap
you lose a lot of velocity which defeats the purpose of using a high velocity cartridge
I don't get this meme. None of their guns come in wild cartridges and even their less orthodox designs have practicality in mind
It's just a joke noguns do so they can feel involved. You'll see this kind of surface level BS in any hobby that has some sort of barrier to entry
But I'm not a nogunz.
I just think it's fun.
>Snorts a line
How about a polymer frame 16 gauge lever gun?
We'll put a rail on the top, people fucking love rails.
Okay hear me out
>sniff
We put rails ON THE LEVER
Belt fed SBR chambered in 9mm
>SNIFFFF
Submachine gun chambered in 357/38 that has 2 barrels and uses helical magazines and you use a lever to switch the barrels
I want this.
I also want this.
6.8 Rem short stroke piston semi-auto bullpup rifle.
It'll use aluminum and polymer for a lighter weight, and polygonal rifling.
Then ummmm
>Snort
A short rail on the bottom and a longer one on top, and it'll take M16 bayonets.
Integrally suppressed nagant revolver that fires cased telescoped centerfire 22 long rifle
A .277 Cal semi auto sporting rifle, with an underslung "flare gun" that just happens to be able to chamber and fire a 3" Magnum shotshell.
A lever action but with a revolver cylinder in 45-70 with an integral suppressor.
A double-barreled 12 Guage revolver shotgun.
twist-action collapsible hunting rifle with an under barrel lever action bull-pup
Slamfire 50 bmg
>17rd .22 pistol 200 bux
>50rd 5.7 pistol
>folding 9mm suppressed carbine
>dual-tube ambi shotgun
keltec is absurdly based
>dual-tube ambi bullpup shotgun
FTFY
thanks anon
its like the only based bullpup in my opinion
t.lefty
*SNOOORRRTTTTTTT*
Alright uhh....
STG 57
but in uhhh 350 legend
WITH
*coughs blood*
pump-action actuated by the pistol grip, like that
*gets a child custody subpoena over text*
Like the kvk 62
... and with a hello keltec anime keychain off the pistol grip UwU
*has stroke*
*Cuts a line with credit card
Alright, hear me out, guys.
A bullpup with a longstroke piston, chambered in 10mm, 5.7,mm, 6.8 spc, 7.62x31mm, or 5.56 NATO
The whole thing will have kits that let's you just buy one receiver and
>snorts
swap out the barrel and use a kit that let's you change the magazine size.
WHOO!
And we're gonna put an integral optic on a carry-handle, thread the barrels for suppressors or muzzle devices.
you FOOL
That is TOO CONVIENENT
... unless we'll use the same springs for that ar-18 bullpupp that we use on the sub-2000 that wear out after 2500 rounds
... then GENIUS!!!!
HERETIC
ONLY if it is break open like the beretta cheetah but SINGLE SHOT BLACK POWDER
A polymer striker fired handgun
>bubblebubblebubblebubblebubble
>....exhales....COUGH hack COUGH..
>Damn...
Ok, so hear me out brothers and sisters, what if we like made guns out of, like...wood and steel? Yeah, I know its far out but catch my groove man...take the wood, right? It's like, a renewable resource. Positive vibes man. And the steel, that stuff's recycled all the time man.
>RDB made of recycled wood
🙂
>It's particle board
🙁
>the particle board is waffle stamped
>:)
portuguese ar-10 handgun vibes
whoa whoa whoa let's not get too crazy here
Keltec-m43
How much of this is just OP samefagging? Be honest now.
Auto revolver rifle with a buffertube in .500 Sw
Yeah, OP killed a Ukraine thread! WTF?
Just IMAGINE how many vatnaggers zelensky could personally kill if he had a pmr30, armatard
A polymer folding carbine in .22 Magnum with a 50round magazine and a pencil barrel.
ok ok ok, wait, I got an idea how we can save a ton of money on shipping boxes and packaging......where's my coke,....
As it was back in the past thread, get your handy-dandy Kel-Tec guns.
Fuck it, I'm roll'n.
A bolt action 22lr bullpup, with waffle furniture.
Fuck it, I'm in!
.
Roll for initiative I guess
MULTI CHAMBER, MULTI BBL FALLING BLOCK!!!
polymer 30mm muzzle loader
Break-action .50 BMG with a buffer tube, a removable bipod and a rail for optics.