Guns are very sensitive to calibration changes. You fucked up your slide by cutting it and removing parts from it, that shouldn't have ever been cut. You fucked up you gun with meme energy and it'll never work right now. Only thing you can do is to buy an entire new slide and internals. Next time, don't start cutting shit if you don't know what you're cutting.
What's been changed on it since factory? What ammo? Try hotter ammo.
I would look into the ejector, extractor, recoil spring and try other magazines and check function without the light/laser and RDS
To add on if the gun stops having malfunctions after removing the dot you might unironically need a bigger speed hole or swap to a lighter recoil spring weight. If there's still issues did you make sure to use factory parts for the slide? The safety plunger especially on the brownells parts kits like to be gay sometimes and may require reprofiling (chuck it in a drill and hold some fine sand paper to it then polish) or just buy a factory plunger.
>Gen1-4
Then unless the slide is out of spec back to
What's been changed on it since factory? What ammo? Try hotter ammo.
I would look into the ejector, extractor, recoil spring and try other magazines and check function without the light/laser and RDS
What does your ejector look like?
Try different ammo. The last box of Winchester USA Ready ammo I got was weak shit and every round failed to cycle. Ammo I got from before 2020 shoots just fine.
If completely new, possibly may need to be broken in, oil, grease and hot rounds. What ejector is installed? Is there a number stamped on it? There's a few different ones to try
how stuck is it? can you eject it by hand or do you have to beat it out? does it cycle unfired ammo? have you tried shooting a different brand of ammo?
Brown
Impossible, glocks never have any failures
They generally don't.
>completely changes recoil profile of recoil-operated gun with new slide and optics
>brown hand
buy a new gun
Quit being a limp wristed moron
Guns are very sensitive to calibration changes. You fucked up your slide by cutting it and removing parts from it, that shouldn't have ever been cut. You fucked up you gun with meme energy and it'll never work right now. Only thing you can do is to buy an entire new slide and internals. Next time, don't start cutting shit if you don't know what you're cutting.
Buy a revolver and learn to use irons
toss that shit stain of a slide out and go back to oem stock also get real mags.
Yeah flush yourself down the toilet
bait
>No front sight or plug
Agreed. Or just a retarded moron.
What's been changed on it since factory? What ammo? Try hotter ammo.
I would look into the ejector, extractor, recoil spring and try other magazines and check function without the light/laser and RDS
>What's been changed on it since factory?
I guarantee it's a p80.
That's a glock gen 3 frame in the pic
Remove red dot and see if it still has issues. Also give it to someone else to shoot to see if it's just you limp wristing or the gun.
To add on if the gun stops having malfunctions after removing the dot you might unironically need a bigger speed hole or swap to a lighter recoil spring weight. If there's still issues did you make sure to use factory parts for the slide? The safety plunger especially on the brownells parts kits like to be gay sometimes and may require reprofiling (chuck it in a drill and hold some fine sand paper to it then polish) or just buy a factory plunger.
Looks like a Glock gen3 frame and Nu-Glock slide assembly to me. If it is it's an incompatible combo
Brownells
https://www.brownells.com/gun-parts/handgun-parts/handgun-slides-parts/rmr-cut-slide-for-glock~-26/
>Gen1-4
Then unless the slide is out of spec back to
Heil Hitler
What does your ejector look like?
Try different ammo. The last box of Winchester USA Ready ammo I got was weak shit and every round failed to cycle. Ammo I got from before 2020 shoots just fine.
Give it back tyrone
Whats the extractor look like brother?
>Brother
If any of you gays call him "king", I swear on all that is holy, I will hunt you down and strangle you with your own sphincter.
Apologies m'lord
If completely new, possibly may need to be broken in, oil, grease and hot rounds. What ejector is installed? Is there a number stamped on it? There's a few different ones to try
BUCK
U
C
K
THE BUCK IS STUCK!
how stuck is it? can you eject it by hand or do you have to beat it out? does it cycle unfired ammo? have you tried shooting a different brand of ammo?
>i dont care if im falling for bait, i can just gaslight myself into thinking its real
i already knew it before i went to reverse search