QTDDTOT

New QTDDTOT

Can I make reloads and sell them to my buddy for cheap?

  1. 2 weeks ago
    Anonymous
    • 2 weeks ago
      Anonymous

      Proof shooting glasses are dumb. They flew right idf.

      • 2 weeks ago
        Anonymous

        >virgin eye pro
        >chad airsoft visor

      • 2 weeks ago
        Anonymous

        Not sure if that's supposed to be sarcasm, but those glasses saved his eye, most likely.

        ?t=326

    • 6 days ago
      Anonymous

      What was determined to be the cause? Ammo or rifle?

      • 6 days ago
        Anonymous

        Mark Serbu insists the cartridges were loaded with pistol charge instead of rifle powder, though you are not supposed to use SLAP ammunition and a recoil brake in the first place

      • 6 days ago
        Anonymous

        Ammo. He did a whole follow up on it.

        • 6 days ago
          Anonymous

          really good video, really high pressures, really huge fireballs, really high frame rates

  2. 2 weeks ago
    Anonymous

    Is that gif from a porn? If so, post source please.

    • 2 weeks ago
      Anonymous

      It's from a shit movie called A Knight's Tale

      • 2 weeks ago
        Anonymous

        >Ademar seething at his computer.

      • 2 weeks ago
        Anonymous

        >shit movie
        You shut your whore mouth

      • 1 week ago
        Anonymous

        well, you could say defecating incidents had a pivotal role in it, yeah.

      • 1 week ago
        Anonymous

        >shit movie
        You have been weighed, you have been measured and you have been found wanting.

      • 7 days ago
        Anonymous

        Mad because he spent his coin on tart cake.

      • 6 days ago
        Anonymous

        I'll beat you so fucking hard you will wish you were that runty warwick davis in his midge horror, existential welded in trashcan of suffering when I get done with you. I'll transplant all the hair from your head to your asshole. YWNBAW

        any film with Shannyn Sossamon is automatically granted KINO status. get the fuck off my board and take your goddamn cringe with you.

      • 6 days ago
        Anonymous

        underrated post

      • 6 days ago
        Anonymous

        How dare you

        • 6 days ago
          Anonymous

          Lol, please tell me that blue shirt guy isn't just a stock photo. I need to see this man making that face while running around in some shitty offbrand John Wick ripoff

    • 2 weeks ago
      Anonymous

      Mate...when were you born?

      • 1 week ago
        Anonymous

        Hey, that's Alan Tudyk, he was in Firefly, reminds me of my favorite Firefly joke

        How does a reaver clean his spear?

        he puts it through the Wash!

    • 2 weeks ago
      Anonymous

      God I wish.

    • 2 weeks ago
      Anonymous

      Fucking zoomers.

    • 2 weeks ago
      Anonymous

      Wish this wasnt a blue board to get rid of you children.

    • 1 week ago
      Anonymous

      You've gotta be 18 to post here.

    • 1 week ago
      Anonymous

      Bro hownew.ru

    • 6 days ago
      Anonymous
  3. 2 weeks ago
    Anonymous

    you can do whatever you want if you put your mind to it

    • 1 week ago
      Anonymous

      >you can do whatever you want if you put your mind to it
      People say nothing is impossible but I do it every day

      • 6 days ago
        Anonymous

        your an astronaut?

  4. 2 weeks ago
    Anonymous

    Anyone know what the muzzle device on this is?

    • 2 weeks ago
      Anonymous

      Flash hider

    • 7 days ago
      Anonymous

      Generically those are called stand off devices because they block the slide from being pushed back out of battery. That one looks integrated into the frame though which is interesting. I must be looking at it wrong or it's photoshopped because I"m not sure how you'd get the slide on and off if it were integrated.

      • 6 days ago
        Anonymous

        Thanks for the answer, I feel like it has to be photoshopped or I just can't find a stand off like that for the PX4 at all. A shame because it looks incredible

  5. 2 weeks ago
    Anonymous

    God she was so perfect. I'll never understand why William didn't drop that skinny bitch down a well and spend the rest of his life dumping loads in based Tomboy blacksmith Kate.

    • 2 weeks ago
      Anonymous

      she was cute until she pulled that strongwahman shit

      • 2 weeks ago
        Anonymous

        Diff anon
        Kate never really had a girl power moment besides just being really good at her job, she had that little spat with William at the start where she was like "Doo they think ah cannae dooit case I'ma wooman?"
        And he was like
        "No they just said you were a shitty blacksmith."
        And she got all pouty.
        Or did you mean Jocelyn? Yeah she jeopardized William's life ( multiple broken bones in a medieval setting? Jesus Christ.) because he couldn't instantly come up with poetry on the spot with no preparation and "something something it's so hard being a princess"

        • 1 week ago
          Anonymous

          Yeah its a pretty entertaining movie but once the Joker enters his simp arc for that mediocre hapa (in medieval Europe) it kinda falls off. Paul Bettany and Alan Tudyk being madlads opposite each other is great, its like a bird fighting its reflection in a mirror.

    • 2 weeks ago
      Anonymous

      It took me until right now to realize she played Lydia in Breaking Bad wtf

      • 1 week ago
        Anonymous

        Oh fuck she's still a babe too

      • 1 week ago
        Anonymous

        >Knights Tale was shot in Czech Republic
        >Lydia wanted to ship meth to Czech Republic
        >Heath Ledger later overdosed

        It was her all along!

    • 1 week ago
      Anonymous

      Amen, borther.

    • 6 days ago
      Anonymous

      she was a widowed roastie

      • 6 days ago
        Anonymous

        >Tradwife tomboy hard working loyal clever wife with many fertile years left
        VS
        >Medieval feminist who thinks having to wear dresses is as bad as getting beaten by soldiers until your bones are broken, and laughs at this.

  6. 2 weeks ago
    Anonymous

    >Can I make reloads and sell them to my buddy for cheap?
    Legally speaking, you would be required to get a SOT license from BATF (assuming Amerifat).

    Practically speaking, unless he tells people about it, or unless you fuck up and he blows off his hand with one of your crappy reloads, no one will know.

  7. 2 weeks ago
    Anonymous

    Anyone have a suggestion for a reasonably priced, low profile red dot to put on a Marlin 45-70?

    Pistol optics look like the best bet but I’m not sure if I can just slap them onto a rifle

    • 2 weeks ago
      Anonymous

      >Pistol optics look like the best bet but I’m not sure if I can just slap them onto a rifle
      You'd have to get a weaver/picatinny mount that it can go on

  8. 2 weeks ago
    Anonymous

    Go check prices on primers, powder and bullets before you consider where the cheap part come in. These days the only thing you can go cheap on is your hour wage.

  9. 2 weeks ago
    Anonymous

    why do most leos (and a lot of people here) screech about not using the slide release when reloading a pistol but everyone uses the bolt release (even has after market parts to make using easier/ambi) button on an ar15

    • 2 weeks ago
      Anonymous

      I have never seen somebody screech about using the slide release to release the slide. Sounds like fuddlore or trolling

      • 2 weeks ago
        Anonymous

        I thought it was fudds at first too. then a young HRT guy told me never to use slide release /sigh.

        maybe it's a florida sheriffs thing. can't find one that doesn't try to 'educate' me on the right way to reload when im at their range.

        • 2 weeks ago
          Anonymous

          Idk, but the owner's manual for my M&P Shield says to pull the slide back as opposed to using the slide release.

        • 2 weeks ago
          Anonymous

          Are you trying to monkeyfuck the slide release with your dominant hand and flagging people next to you or something?

      • 1 week ago
        Anonymous

        I did a tactical handgun course and the guy recommended slingshotting because it definitely works on all guns. Seems like reasonable advice.

        • 1 week ago
          Anonymous

          NTA, but it sounds practical to me, at least. Not all semis have a slide release, as far as I know, so unless you intend on being fully proficient with a specific pistol, teaching a more universal technique makes sense.

        • 1 week ago
          Anonymous

          NTA, but it sounds practical to me, at least. Not all semis have a slide release, as far as I know, so unless you intend on being fully proficient with a specific pistol, teaching a more universal technique makes sense.

          what is the tactical advantage of not training with your weapon enough to not know whether it has a slide release or not

          • 1 week ago
            Anonymous

            I think the idea being that you may not always have your personal weapon at-hand, and should be proficient with a wider array of reasonably possible weapons.

            • 1 week ago
              Anonymous

              what are you doing that you're getting into self defense situations while holding somebody else's gun? destroying the shagohod?

            • 1 week ago
              Anonymous

              That's a retarded idea

          • 1 week ago
            Anonymous

            It makes sense from an *instructor's* perspective. He's got many people with many different guns, he can't give everyone individual attention. But the "just slingshot it" advice works for everyone so that's why he says it. It makes his job easier.
            The individual shooter's perspective is totally different, that person ought to know exactly how his gun works and which method works best for him.

    • 2 weeks ago
      Anonymous

      Because Glock sent that tidbit home with their certified armorers when they qualified on Gen 2 22s in 2003 and now the ITOs and FTOs think it's gospel for every handgun under the sun because different manuals of arms are too hard for people with room temperature IQs.

      • 2 weeks ago
        Anonymous

        perfect answer, thanks so much. explains the leo parroting perfectly

        • 2 weeks ago
          Anonymous

          Anytime, fucker.

    • 2 weeks ago
      Anonymous

      There was a trend in the 00s about always using gross motor skills instead of fine motor skills. The idea was that using the slide release would be risky during a high stress environment (i.,e., out of battery reload). Smart people questioned this and said, instead the magazine release and the trigger examples of fine motor skills? Now good instructors teach both ways.

      I feel for the Gucci Glock meme by using an Aimpoint ACRO combined with a Kagwerks slide release for a high bore grip. Now I can’t sling shot the slide without occasionally hitting the adjustment buttons or occasionally bending the slide release and getting a glove or thumb punched.

    • 1 week ago
      Anonymous

      From what I've heard it's because using the slide release to allow the slide to go forward causes unneeded wear on the slide whereas pulling it back and allowing it to go forward is a more natural movement and causes less wear.

      I dunno if that's true or not tho, sounds like another thing that makes very minimal difference in the long run.

    • 1 week ago
      Anonymous

      Because if you listen to other trainers besides my company then YOU WILL DIE, you don't want to die anon, do you? Buy my cool guy merch

  10. 2 weeks ago
    Anonymous

    >Friend wants a .22 can
    >Mention they're overpriced and to F1 Alibaba shit
    >He actually gets a tax stamp and goes the GunBroker solent trap route
    >Engrave it, drill it, damn nice for $70
    Now the ATF sent him a ' fuck you' notice saying the solvent trap was a suppressor, illegally imported, and an existing suppressor can't be on a F1.
    What do? They're bluffing, but a lawyer would cost more than the suppressor to fight it.

    • 2 weeks ago
      Anonymous

      This is why there should be an IQ test on gun ownership

      • 1 week ago
        Anonymous

        It was perfectly legal per the ATF in 2020 when it occurred.
        The ATF changed their bullshit law to include dimpled solvent traps as suppressors in 2022 after that trap was legally converted to a suppressor.
        Grandfathered in and AAC is out $400 goy bucks for a beer can's worth of aluminum.

    • 1 week ago
      Anonymous

      Homemade suppressors are legal. It wasn’t a suppressor when it was purchased. Send them a fuck you letter back.

  11. 2 weeks ago
    Anonymous

    [...]

    My Danner lites served me well in the warehouse.

    • 2 weeks ago
      Anonymous

      I’ve seen those a lot. Just don’t know if the toe is sturdy enough. They seem more flexible than sturdy.

  12. 2 weeks ago
    Anonymous

    For niche reloading anons-
    Hornady has recently run out of 7.35 (.300) bullets and so far has not talked about manufacturing more, taking with it the last option for bullets in the Carcano as far as I've been able to find. Does anyone know of option for reloading- possibilities of casts or maybe another company that makes them, or even a swage to shrink .308?

    • 2 weeks ago
      Anonymous

      That's not a caliber I handload for so I don't know where you might be able to find off the shelf projos. Casting is an option. So is having a company make lathe-turned bullets at that diameter, like GS Custom. Swaging is most likely your best bet though, it's going to save a ton of labor over casting and will certainly be cheaper than having high-end custom bullets made.

      • 2 weeks ago
        Anonymous

        Aye I was worried about that, unsurprisingly there isn't new production for ANY of the equipment for this save for Lee's die sets, so even coming across a swage is going to be a pain... but at this point there really isn't much of an option

        • 2 weeks ago
          Anonymous

          Normally I'd say cast 'em, but that's more practical for either pistol or black powder calibers. The carcano is no slouch in the velocity department so you'd have to fiddle with gas checks and I'd bet you'd still have leading.
          You might check with Corbin about swaging dies.

          If you know anyone who has access to a metal lathe it would be pretty easy to make a swage die you could use in any common handloading press. Buy 7/8"-14 bolt about 2-2.5" long overall. Chuck it up in a lathe, face and center drill the end, then drill it through with an "M" size drill (0.295"). Then replace the drill with a #6 taper pin reamer and run that into the hole most of the way, just leave about 1/2" of the .295" diameter at the very end of the hole. Now run a .2995 reamer to finish the last little bit of the die. Polish the ID with fine auto valve lapping compound and a wooden dowel. Then repeat with fine metal polish like Flitz. Even if you have to buy all those bits it's probably only about $75 in total.

          • 2 weeks ago
            Anonymous

            Thank you a lot man, I'm probably going to go the route of swaging it like you said. There's a machine shop that specializes in fittings near me and I'll see if they could do this. Now this should work fine in my reloading set, but to hold the bullet I'm guessing there's a swage bullet holder or something?

    • 1 week ago
      Anonymous

      Only because I love you, anon.
      http://www.selwayarmory.com/hornady-bullets-8x56r-caliber-330-diameter-205-gr-hornady-spire-point-box-of-183.html

      • 1 week ago
        Anonymous

        Completely out of stock, kind of the reason I wanted to reload for it to begin with

        • 1 week ago
          Anonymous

          Shows they have 8 boxes?

          • 7 days ago
            Anonymous

            Oh wow I am actually retarded, I went and looked at complete cartridges not bullets. My bad completely. I'm probably going to be grabbing them soon

  13. 2 weeks ago
    Anonymous

    The fact that Ulrich didn't plow this absolute wench seals that he is in fact of low status and probably not even from Lichtenstein

  14. 2 weeks ago
    Anonymous

    Are there any decent paying contracted security jobs that don't require military experience? I'm in the process of training for a contracted security job for 20 dollars an hour and I'm planning on trying to find something better if I can't get hired on for security directly under the plant which pays 32 an hour in the next 3 or 4 years. Preferably something overseas but that doesn't look feasible.

    • 2 weeks ago
      Anonymous

      Nuclear plant to be specific

  15. 2 weeks ago
    Anonymous

    Nothing is illegal if you don't get caught

  16. 2 weeks ago
    Anonymous

    Why hasn't Kel-tec made a semi auto black powder smoothbore to sell to felons and folks who want to larp as felons at the range for the street cred? Is it because they hate freedom?

    • 2 weeks ago
      Anonymous

      Because a semiauto BP would make it about 10 rounds before seizing up.

      • 2 weeks ago
        Anonymous

        How is this different from any other Keltec?
        ayyyyyyyyyyyyyyyyyy

      • 2 weeks ago
        Anonymous

        Usually I'd agree but the Auto 5 (or similar long recoil shotgun) and surprisingly Hi-Point actually work rather well. They use cartridges, though, which really defeats the point.

        ?t=103

        ?t=293

      • 1 week ago
        Anonymous

        That doesn't sound like an unsolvable problem
        For me it's the risk of still-burning black powder from the round you just fired still being in the chamber when it's opened and loads the next round, potentially detonating the magazine
        if that's a 1 in 10,000 chance in your design, you can't sell it

        • 1 week ago
          Anonymous

          >For me it's the risk of still-burning black powder from the round you just fired still being in the chamber when it's opened and loads the next round, potentially detonating the magazine
          With sealed and crimped brass-cased ammo, that's not even a 1/10k chance. That'd require a catastrophic failure in the ammo and even then it'd only be one case blowing up.

          >I know some scary-ass gun toting bitches.
          your mtf chud friends don't count anon. Go back to r*ddit.

          >He's never known a farm wife or a woman who owns a convenience store in the ghetto
          My man, you need to get out of the suburbs.

    • 2 weeks ago
      Anonymous

      The law doesn't let you use cartridge guns just because they have BP in them.

  17. 2 weeks ago
    Anonymous

    lads, beretta 92 or a cz p09?? i can't decide on my next purchase

  18. 2 weeks ago
    Anonymous

    Why hasn’t any nation developed a doctrine around rotary aviation? APCs could be replaced by much more mobile transport helicopters.

    • 2 weeks ago
      Anonymous

      Air Cav and RLI come to mind

    • 2 weeks ago
      Anonymous

      >what is air assault?

    • 1 week ago
      Anonymous

      >what was the predominant tactic in the Vietnam fucking War

  19. 2 weeks ago
    Anonymous

    Okay bros tell it to me straight
    Is the tan on the beretta m9a4 ugly or do you think it looks nice?

    • 2 weeks ago
      Anonymous

      I think black looks better, but I don't hate tan/FDE.

    • 1 week ago
      Anonymous

      one day an anon here called that color 'babyshit brown' and since then i can't get that phrase out of my mind

  20. 2 weeks ago
    Anonymous

    Do spec ops dudes still silently kill sentries? If so, do they use knives or garrotes or what? Or is that era over and they just pick a spot on the gps to drone

    • 2 weeks ago
      Anonymous

      I'd imagine they avoid it if at all possible, due to how risky it is. But when I was in the Army a Green Beret told me their method was to shove a knife up the taint rupturing the diaphragm, preventing the target from vocalizing at all and causing them to bleed out fairly quickly, but who knows he could've been yanking my chain, but he did say the knife needs to be a minimum of 6" and if he was just messing with me I don't think he would've included such a minute detail.

      • 6 days ago
        Anonymous

        Through the liver, up & in towards the ribcage makes more sense. I'm not entirely certain they would be unable to vocalize. Maybe if you're timing it on the exchale.

  21. 2 weeks ago
    Anonymous

    >Start LLC
    >Make account with distributors (like RSR, Lipseys, Davidson, etc.)
    >Buy ammo wholesale, sell to boomers at local gunshows for higher-than-online, but lower-than-Basspro prices.
    Any reason not to do this? The idea is dependent on gunshow boomers not knowing/understanding how to use ammoseek, and I really have no idea if they do or not. Worse case scenario, I'm stuck with a large quantity of ammo, but that's not that bad.
    To be clear, this would just be a little side gig, I'm not suggesting this as a livelihood.

    • 2 weeks ago
      Anonymous

      Most big distributors like Sport's South, Lipsey's and Zander's won't even let you open an account unless you have an FFL, even if you're only trying to sell ammo or parts. Your best bet is buying bulk import ammo from ~~*MCT Defense*~~ or some other importer. MCT was bringing in Yugo M67 last year and selling by the pallet, but you had to pick it up at their port of entry. Alternatively, importation licenses are cheaper than FFLs, and you can get them for batches of ammunition, but you're on your own trying to buy international.

  22. 2 weeks ago
    Anonymous

    Making ammo is extremely time consuming laborious work without at least $10k in gear plus affordable primers can be difficult to find. They used to be about $30/1000 and now they are going for $100/1000 but in sure the major ammo manufacturers are still paying low price for it. Cheapest powder will bi titegroup for pistol rounds. And cheapest brass will be once fired and need to be cleaned and processed. Rifle brass tends to be expensive. I don't think it's really worth it. My 9mm reloads are costing about ~.30 each which isn't as cheap as the cheapest 9mm ammo but im using hollowpoints and loading +p.

  23. 2 weeks ago
    Anonymous

    My rs regulate upper 1913 is pointing at like 0:30-0:45 instead of 12 o clock. Does this happen to anyone else and should I try shimming it or something or let it be.

    • 2 weeks ago
      Anonymous

      hard to take a picture but this is my diagram of the off the problem.
      >black is the iron sights
      >red is the rs regulate 1913 rail

  24. 2 weeks ago
    Anonymous

    How obsolete is a 70s edition of a reloading manual? What percentage of the powders would no longer exist?

  25. 2 weeks ago
    Anonymous

    At what range will a PAGST helmet stop .223?

  26. 2 weeks ago
    Anonymous

    There's no barrel nut thread on my ar upper.
    How do I put the delta ring back on?

  27. 2 weeks ago
    Anonymous

    This is my EDC in a 2" snub because nobody has anything else. How fucked am I?

    • 2 weeks ago
      Anonymous

      should be enough to scare off any potential rapists sweetheart

    • 2 weeks ago
      Anonymous

      >lite
      >reduced recoil
      >breast cancer awareness ribbon
      >probably subsonic ammo with plastic tips
      >the plastic is pink for the breast cancer tie-in
      I am fucking rolling. it gets worse the longer I look at it

      • 1 week ago
        Anonymous

        It's fast enough to reliably expand in gelatin, even from a snub. But it doesn't quite get 12" of penetration.

    • 1 week ago
      Anonymous

      Why do manufacturers assume girls are pussies?
      I know some scary-ass gun toting bitches.
      I bet not one of them loads that pink shit.

      • 1 week ago
        Anonymous

        Because most girls are hence the name.

      • 1 week ago
        Anonymous

        >I know some scary-ass gun toting bitches.
        your mtf chud friends don't count anon. Go back to r*ddit.

      • 1 week ago
        Anonymous

        >scary-ass gun toting bitches.

        • 1 week ago
          Anonymous

          secret esoteric knowledge comes after the mental illness anon.

      • 1 week ago
        Anonymous

        Can you tell me your secrets of finding such women? I find myself lacking a gf

    • 1 week ago
      Anonymous

      Nobody you start putting lead in is going to think
      >Oh, this is reduced recoil ammunition, due to this decision these bullets don't count
      They are going to be like
      >AHHHH OH MY GOD CALL THE AMBERLAMPS

  28. 2 weeks ago
    Anonymous

    Can I buy a handgun with a vertical license?

    • 2 weeks ago
      Anonymous

      Are you 21 and just haven't gotten your new DL yet? If so yes, you don't need a horizontal license to do 21 yo stuff, it's just to make it easier to check. Go by some beer if you don't believe me.

    • 1 week ago
      Anonymous

      Yes, especially if it's private sale. You only need to be 18 for a private sale too.

  29. 2 weeks ago
    Anonymous

    Any magazines that can hold 44-40 rounds? I assume 44 type magazines will work? (I ask because I want to reload a SAO revolver faster)

    • 1 week ago
      Anonymous

      A .44 magnum magazine should fit them but the only one of those I know of is the Deagle.
      And the way to "reload" a SAO faster is to carry more SAOs.

      • 1 week ago
        Anonymous

        Thanks anon. (I'll buy more guns later)

  30. 2 weeks ago
    Anonymous

    I just got my first gun a Glock 23.
    However, I just realized something, I am not strong enough to pull the slide back.
    What do I do?

    • 2 weeks ago
      Anonymous

      just get a slide strap

    • 2 weeks ago
      Anonymous

      >im trans BTW if that matters
      if its a strength issue try pushing (using your chest instead of your shoulder) instead of pulling, pushing your hands together in a prayer motion but holding the gun.
      if its a grip issue you cant try pic related but honestly you might want to sell it and go for somthing like a beretta bobcat (or taurus clone if poor) or a s&w shield EZ. guns made with bitches in mind.

      • 2 weeks ago
        Anonymous

        well i mean those people who grab the back of their slide with their thumb and pull it
        seems impossible
        maybe those were 9mm?

        • 2 weeks ago
          Anonymous

          you are just very very very weak, I just did it with just my pinky curled around the slide

          forgot to add almost any revolver to my list of recommendations, just know you will probably have to pull the hammer with both hands before firing. someone probably makes a "for women" revolver that is not the case with but i wouldn't know because im not a noodle armed bitch. go do some work with your hands shit.

          • 2 weeks ago
            Anonymous

            >you are just very very very week
            i used to have a bb gun and i had to put the gun in between my legs and clamp down just to cock the lever action thingy

            • 2 weeks ago
              Anonymous

              Dude just work out for gods sake.

            • 2 weeks ago
              Anonymous

              > in between my legs and clamp down just to cock the lever action thingy
              tell me more weak femboy, also whats your contact info

            • 2 weeks ago
              Anonymous

              Yeah just work out. Buy some 5 lb weights at walmart. Get one of those hand exercisers. Do something. The Red Ryder (which is what I assume you're talking about) IS much harder to cock for some odd reason, but not so hard you should HAVE to do that.

              • 1 week ago
                Anonymous

                >Red Ryder
                Not necessarily, I remember when I was a kid my dad had a nice Diana air rifle, it had a side-lever to cock it. When I was a kid that was impossible to cock. As an adult it's easy though it clearly takes effort that is too much for a kid.
                There's no way he was too weak to cock a Red Ryder.

            • 2 weeks ago
              Anonymous

              hey range femboy the leather club is two blocks down

        • 2 weeks ago
          Anonymous

          it would be the same if it was a 9. you are just incredibly weak.
          lift something or hell squeeze one of those foam squeeze balls for 30 minutes a day.

          • 2 weeks ago
            Anonymous

            >lift something or hell squeeze one of those foam squeeze balls for 30 minutes a day.
            This, buy a pinky from the toy aisle of your local store and get squeezing. Literal arthritic old women do this as an exercise (as well as rolling it under arms, back, feet).

        • 2 weeks ago
          Anonymous

          https://i.imgur.com/9dKeoKF.jpg

          >lift something or hell squeeze one of those foam squeeze balls for 30 minutes a day.
          This, buy a pinky from the toy aisle of your local store and get squeezing. Literal arthritic old women do this as an exercise (as well as rolling it under arms, back, feet).

          shid

        • 1 week ago
          Anonymous

          pull the slide back with one hand and push the gun forward with the other

    • 2 weeks ago
      Anonymous

      Grip training should be treated like any other type of strength training. I would start with rice digs for hand strength and and, if possible, general strength training without wraps or glove.

      As for sport specific strength, buy 25 snap caps and 5 days a week perform Tap Rack Bang dry fire drills. The snap caps will insure that you are fully pulling the slide back. Start with 5 sets of 5 TRB and slowly reduce the rest between sets and/or increase reps. Once you can do 25 in a row you’ll be good to go. By-the-by, is loading handgun magazines by hand difficult?

      • 1 week ago
        Anonymous

        >By-the-by, is loading handgun magazines by hand difficult?
        yes the bullets are round so they roll off each other when you press down

        • 1 week ago
          Anonymous

          Use a hammer to make them round, plus they will do more damage to Muslims!

          https://en.wikipedia.org/wiki/Puckle_gun#Two_versions

    • 1 week ago
      Anonymous

      Literally how?

  31. 2 weeks ago
    Anonymous
  32. 2 weeks ago
    Anonymous

    Anybody try Outlaw holsters before? Any good?

  33. 1 week ago
    Anonymous

    Is there a way to convert Glock 19 mags so a Glock 17 can accept them?

    I see the round count extenders but the base plate looks like they'll get in the way.

  34. 1 week ago
    Anonymous

    how would I learn to counter spooks?
    as far as I am aware only spooks get taught counter-spooking but my country doesn't operate spooks
    only resource seem to be writings by ex-spooks and while I imagine the core philosophy of spooking is unchanged most of those writings tend to be two to three decades old meaning in terms of tech and tactics they are most likely irrelevant
    >inb4 every country spooks
    I don't mean generic spooks but the kind that is spookiest

    • 1 week ago
      Anonymous

      >I don't mean generic spooks but the kind that is spookiest
      ...black people?

      • 1 week ago
        Anonymous

        even spookier
        I'm talking the kind that doesn't even glow in the dark

  35. 1 week ago
    Anonymous

    I have a heritage rough rider 22 as do a few of my buddies. We are holding our own version of cowboy action shooting in a few months and I am looking for resources to learn how to make the trigger and hammer smoother and lighter without spending an arm and a leg. I've looked online but can only find dis & ass videos and reviews. Thanks lads.

  36. 1 week ago
    Anonymous

    Does anyone recognize the rifle on the wall-mounted rack at the right side of the pic, second from the bottom? The one with the telescopic sight. It's the one gun in the pic I can't identify and it's driving me nuts.

    • 1 week ago
      Anonymous

      It closely resembles this, but it's not quite the same, and given the autistic level of detail given to all the rest of the guns I don't think this is quite it. It appears to be an underhammer design, I think?

    • 1 week ago
      Anonymous

      what in the world

    • 6 days ago
      Anonymous

      Holy shit, its Ian top right, middle portrait.
      Bottom left in portrait group is John Moses Browning
      Bottom right is a maid in the position of a card, specifically jack of hearts or king of diamonds.
      Top left looks very familiar,
      Any info on top right and large right?

      • 6 days ago
        Anonymous

        I thought the one to the right with the bug was going to be a reference to Carl Akeley but the pic I was thinking of was in a different pose and he's not holding the leopard by its legs. Also checked.

      • 6 days ago
        Anonymous

        And the woman with the shotgun I thought may have been Annie Oakley but there seems to be no such picture of her with a broken open shotgun, nor does it make sense that she'd have a bandolier across her chest. Perhaps I'm missing another famous female sharpshooter or cowgirl from the 1800s-early 1900s.

      • 6 days ago
        Anonymous

        Maybe a reference to a pic of Roosevelt? I can't find any photos like that with him in it, but the mustache and outfit matches well, as do the glasses I think I can see.

  37. 1 week ago
    Anonymous

    Anybody have experience buying used? Specifically from Armslist? What are some ways to get burned and ways not to get burned?

  38. 1 week ago
    Anonymous

    What kind of vest is this? It had no markings, and I couldn't tell by feeling if it's ballistic nylon or kevlar. It was pretty soft like kevlar, but I don't know for sure. No markings. It's built just like the old nylon flak vests

  39. 1 week ago
    Anonymous

    I've seen that infographic of the most commonly seized guns. What kind of ammo is most commonly in them? Shitty hollow points?

    • 1 week ago
      Anonymous

      >What kind of ammo is most commonly in them?
      Shitty steelcase FMJ and stolen surp ball.

  40. 1 week ago
    Anonymous

    How can you tell if a Webley Mark VI cylinder has been shaved down?

    • 1 week ago
      Anonymous

      Look at it. See that number 815? If the cylinder were shaved down that number would be cut away. Also if it were shaved down the machining marks and finish would be identical between the ejector star and the rest of the cylinder. On this gun you can clearly see different machine marks and different colors of bluing between the ejector and the rest of the cylinder.

  41. 1 week ago
    Anonymous

    normal for my cc to not show online gun purchase until/after the FFL receives it? it's been a week and i haven't heard back
    t. always bought in person before

  42. 1 week ago
    Anonymous

    whats the best gun

    • 1 week ago
      Anonymous

      >Best Gun
      >A pretentious English term for a gun that must have several specific details. To qualify for the title, it must have a Sidelock action with Intercepting Sears, have Chopper Lump Barrels, be Stocked to the Fences and have its lumps concealed by its floorplate. While almost any respectable gunmaker can accomplish these requirements, the implication, of course, is that it is also built to the highest standard of quality.

    • 1 week ago
      Anonymous

      The one I own that you (probably) don't have

      How often do I need to clean my beretta pistol?
      Every time after I go shooting?

      After every shoot is good practice, but you could easily do it every 1000 rounds and be fine. Personal preference until it's so gunked up that it's failing to fire

    • 6 days ago
      Anonymous

      The one that works when you need it too.

    • 6 days ago
      Anonymous

      This gun is pretty nifty and all but it's nothing without what Micah?
      >Training?
      Training.

  43. 1 week ago
    Anonymous

    How often do I need to clean my beretta pistol?
    Every time after I go shooting?

  44. 1 week ago
    Anonymous

    Should I get a Beretta PX4 in 40 or 9? There's a good rebate on them right now

    • 1 week ago
      Anonymous

      Unless you have other guns chambered in 40 that you already stock up on a lot of ammo for, get 9.

  45. 1 week ago
    Anonymous

    >reloads
    7.7x58 is hard to find, unreasonably expensive, and I've been curious to know what I need to do about that for my current niche money-sink.

  46. 1 week ago
    Anonymous

    What pouches were the MOLLE webbing on the chest of the PASGT vest made for? It’s even on the prototype vests fron the 70’s

  47. 1 week ago
    Anonymous

    >tfw no PrepHole blacksmith gf
    How do I fix this?

    • 6 days ago
      Anonymous

      Become the PrepHole blacksmith gf
      >problem solved that will be $9.95

  48. 1 week ago
    Anonymous

    Is it wrong to binge watch the cute girl showing me guns?

    • 1 week ago
      Anonymous

      She's married, schlemiel

  49. 1 week ago
    Anonymous

    Is it possible to quad load but with 6 shells if your hand is big/wide enough?

  50. 1 week ago
    Anonymous

    Is strichtarn good for rural mid Western America (in summer)? I'd like to think so especially with corn fields everywhere

    • 6 days ago
      Anonymous

      stop being a fag, and get mossy oak bottomlands like a real man.

  51. 1 week ago
    Anonymous

    where can i buy buy type56 rig in eu

    • 1 week ago
      Anonymous

      Maybe Amazon? Amazon in the US has a few different companies selling the, no idea if they're surplus or repo, but the quality and price would probably be the same

      • 1 week ago
        Anonymous

        Thanks for the advice, but we don't have amazo in Czechchen Republic

        • 1 week ago
          Anonymous

          Check if you can find a proxy service in the US that will buy shit for you and ship it to you.

          • 1 week ago
            Anonymous

            ok i will try

        • 1 week ago
          Anonymous

          Do you have one of the Chinese Amazon equivalents?

          • 6 days ago
            Anonymous

            Yes will try thanks

  52. 1 week ago
    Anonymous

    >https://www.ur-tactical.com/product/gen-2-ultimate-direct-action-pants/
    >https://www.ur-tactical.com/product/gen-2-improved-direct-action-shirt/
    According to their website these guys use actual licensed camouflage fabric for their clothing, is their shit actually a good lower cost alternative to the more expensive stuff like Crye or is it just chinkshit I should avoid?

  53. 1 week ago
    Anonymous

    Any reason I couldn't repair pitting with electroplating and polish? Just seems like adding material vs removing it via abrasion is a better strategy for an antique barrel or whatever.

    • 1 week ago
      Anonymous

      The issue with electroplating is setting up the conditions such that the deposition happens exclusively where it is desired, otherwise you will see a corresponding increase in thickness along the entire conducting surface that is immersed in the plating solution. Also, the pitting of the workpiece is typically rather significant in thickness to what is normally plated on to give corrosion protection. Finally, to do the plating properly where it will strongly adhere to the surface, slow-and-steady is how it goes, which could take many days to weeks to get up to the desired plate thickness.

  54. 1 week ago
    Anonymous

    Why don't White people like AK pistols?

    • 1 week ago
      Anonymous

      White people prefer tacticool AR pistols covered in rails.

    • 1 week ago
      Anonymous

      We've got Krinkovs

  55. 1 week ago
    Anonymous

    >forced diversity
    female blacksmiths were virtually unheard of and this is further evidence that hollywood has always been trying to push their leftist agenda on us. the fact that no one brings this up proves how pozzed this board has become

    • 1 week ago
      Anonymous

      Its actual pretty funny to go back in time with old movies to pinpoint which exact stage in the agenda was being pushed at that particular time.
      90s and early 2000s was squarely in the "blacks are cool, women are strong and gays are funny" stage which coincided with the "white dads are fat/stupid/lame and kids are always smarter/cooler than their parents" stage.

      • 1 week ago
        Anonymous

        >/pol/tards in charge of insightful, original thoughts

        • 1 week ago
          Anonymous

          Not from 4chan and what was said should be obvious to anyone with a brain stem. Its just kinda funny to see how obvious it was and how we didn't even notice it at the time.

    • 1 week ago
      Anonymous

      i always used to think it was just for comedic juxtaposition. in a vacuum, a single instance can still be seen that way. it's when you zoom out and notice the overwhelming pattern that the agenda becomes clear.

  56. 1 week ago
    Anonymous

    Thoughts on conceal carry insurance? Meme or real deal?

  57. 1 week ago
    Anonymous

    is there such a thing as a pump action shotgun that works "in reverse" as in instead of pulling and pushing to chamber another cartridge, you push and pull ? and if such a thing exists, could you realistically "bump fire" it ?

    • 1 week ago
      Anonymous

      No, that doesn't exist.
      You most likely wouldn't be able to bump fire it since the motion required to operate the pump is quite long and takes some effort. Bump-firing a semiautomatic weapon is much easier since all you have to do is hit the trigger, you're not applying any significant force for a significant distance like you'd have to do for bump-firing a manual action gun.

    • 1 week ago
      Anonymous

      alright, yeah that's what I thought, thanks

    • 1 week ago
      Anonymous

      I think there may have been a weird DIY shotgun that was pump forward? Maybe some odd old gun? Dig around C&RSenal maybe. I swear such a thing existed but not the way you're probably thinking.

      • 1 week ago
        Anonymous

        you mean something like the neostead and RMB-93? both have inverted cycles

        answered our question, that's exactly what I was thinking about, but yeah as

        No, that doesn't exist.
        You most likely wouldn't be able to bump fire it since the motion required to operate the pump is quite long and takes some effort. Bump-firing a semiautomatic weapon is much easier since all you have to do is hit the trigger, you're not applying any significant force for a significant distance like you'd have to do for bump-firing a manual action gun.

        said, looking at videos it looks like it would take too much force to bump fire them

    • 1 week ago
      Anonymous

      you mean something like the neostead and RMB-93? both have inverted cycles

    • 6 days ago
      Anonymous

      too long of an action to bump fire. Counter by shortening pump. While you can shorten the length of pump to an arbitrary degree, that just means it takes more effort to pump which necessitates stronger recoiling shells to unlock and travel the whole distance. What ever you divide the pump distance by, you multiply the pump force required. So a normally 6 inch pump cycle with a (idk what the numbers actually are) 4 lb force unlock/recock force required, if shortened to 2 inch pump would require 12 lb force, and shortening down to 1" would make it require 24 lb force. So, in a slam fired gun with the trigger tied down, the pump would be the trigger and it would be 24 lbs and 1 inch of pull. The good news is most mechanisms with resistance can be reduced to arbitrary degrees, downside here is you still need the energy to unlock and move the bolt rearward. Possible to get functioning, but improbable to get reliably.
      >tldr: Yes it exists, no* you can't bump fire it.

  58. 1 week ago
    Anonymous

    Will I lose my guns if I go to a psychiatrist? I've been having some issues I think I should get sorted out.

    • 1 week ago
      Anonymous

      No just don’t tell anyone and pay out of pocket if you can. Getting help is what’s most important though anon. You can’t enjoy your guns if you’re not around

      • 1 week ago
        Anonymous

        Thanks

        Psyche and therapy is a meme. You’re paying people to agree that your life sucks, don’t waste your money Anon.

        The problem is my life doesn't suck so why do I feel like shit and think about shit. I've been able to keep it out of me for years but it recently crept back in worse than before.

        https://i.imgur.com/xYs8Rpf.jpg

        If you are ok with religion find a Christian therapist, and avoid women, garden gnomes, and minorities. Never mention guns or self harm.

        If you really are thinking of killing yourself, give your guns away to a person that will let you visit them, like a divorced white dad, on the weekends.

        I'm not religious but I have no problems with religion. I could never kill myself, I have four little sisters and a mother to take care of.

        • 1 week ago
          Anonymous

          Sorry if you've heard this before, but do you eat well, exercise somewhat regularly, and touch grass often? That might not fix it, but without those things, you don't have a fighting chance. You could also try eating more chocolate (Darker the better, Cacao has chemicals that more regularly convert to oxytocin IIRC, it genuinely works for me at least) and some St. Johns Wart.

          • 6 days ago
            Anonymous

            Yes moron I heard it all before
            >stop touching your dick
            >go outside
            >work out
            >get a real hobby
            >no i said a real hobby
            >eat right
            >get some friends
            >get a gf
            >get a job
            >have sex
            I live in the sun, I've been working out for years, a million different hobbies, I've been eating decent for years and my diet has only gotten better with time. I masturbate once a week to my imagination. I've had a normal number of gfs, and am not a virgin. I have a small circle of friends and coworkers I regularly hang out with, I have a big, close family. I drink a little socially, I smoke a little socially and I don't do either too much in one sitting, maybe two or three times a month.

        • 1 week ago
          Anonymous

          I was so despressed once, I spent 2 weeks in bed eating popcicles a d rice.

    • 1 week ago
      Anonymous

      Psyche and therapy is a meme. You’re paying people to agree that your life sucks, don’t waste your money Anon.

      • 1 week ago
        Anonymous

        >Cancer and chemotherapy is a meme. You’re paying people to agree that your body sucks, don’t waste your money Anon.

    • 1 week ago
      Anonymous

      If you are ok with religion find a Christian therapist, and avoid women, garden gnomes, and minorities. Never mention guns or self harm.

      If you really are thinking of killing yourself, give your guns away to a person that will let you visit them, like a divorced white dad, on the weekends.

      • 6 days ago
        Anonymous

        >find a Christian therapist
        Scratch that idea. Just talk to a priest, it's free and they want to help you. In fact, if you're Catholic, you can do this in confession too, the priest is literally obligated on threat of expulsion from the clergy and/or excommunication if he ever divulges things you say during confession (I don't know how other denominations who practice confession handle this. Do others do this?). All he can do is urge you not to do something bad, and he can't administer forgiveness unless you're truly repentant for whatever you've sinned for.
        As well, a priest could gauge if the issue isn't actually psychological but instead a demon.

        Thanks
        [...]
        The problem is my life doesn't suck so why do I feel like shit and think about shit. I've been able to keep it out of me for years but it recently crept back in worse than before.
        [...]
        I'm not religious but I have no problems with religion. I could never kill myself, I have four little sisters and a mother to take care of.

        I just want to say that even though you're not religious, I'd still trust a priest over a therapist. It's also free to do so, so long as he has time. As per Catholic canon, even non-Catholics are allowed to confess and seek penance for sins. While I don't think sin is what's troubling you here, you're welcomed to speak your mind in a safe place. If your family attends church, I'd speak to their priest as he'd be known to you more than a stranger.

        • 6 days ago
          Anonymous

          >obligated on threat of expulsion from the clergy and/or excommunication if he ever divulges things
          Excuse me for this nonsense sentence merging, I'm tired. I'm trying to say that he's not allowed to tell anyone what you say in there whether you've repented or not. If he did, he'd be expelled from the clergy and possibly excommunicated too. Therefore, it's better than therapy because a therapist is going to be about as helpful if not worse, charge you a lot of money, and can report you to the authorities over anything you say twisted out of context. Priest is free, confidential, and may have a lifetime of experience to draw from at least.

    • 1 week ago
      Anonymous

      If you say anything crazy, and they force you stay longer than 3 days in an inpatient, yes.

    • 1 week ago
      Anonymous

      No.
      If you are that worried, don't tell them you have guns.

  59. 1 week ago
    Anonymous

    Anyone use these holsters before? Worth the money?

    • 6 days ago
      Anonymous

      idk, might clash with your purse.

  60. 1 week ago
    Anonymous

    What gun (and what chambering) should I get if all I want to use it for is to learn/practice reloading ammunition?

  61. 1 week ago
    Anonymous

    Did I hear correctly that in rifles chambered for .308 you can also use .300BLK in them as well? How would this affect the gun if you were to use this as your primary ammo for it?

    • 1 week ago
      Anonymous

      Hahahaha absolutely not true

      • 1 week ago
        Anonymous

        I figured. I dunno what else they would've been talking about tho unless it was COMPLETELY out their ass.

        • 1 week ago
          Anonymous

          The bullets in the cartridges might be interchangeable, but the cartridges themselves have completely different proportions (x45 vs x51) and likely different pressures (which makes .308 go farther faster)

  62. 1 week ago
    Anonymous

    Would it be a good idea or bad idea to spray clp in a can of ammo. Especially if it's ammo for long term storage?

    • 1 week ago
      Anonymous

      Just put desiccant packets in it

      • 1 week ago
        Anonymous

        Those have to be replaced like every 3 months though.

        • 1 week ago
          Anonymous

          dont open the thing every day then

          • 1 week ago
            Anonymous

            Moisture will still get in

            • 7 days ago
              Anonymous

              you're being an autistic gay.
              I've had my ammo can stored with nothing but the boxes they've been in for a year and it shoots absolutely fine.

    • 1 week ago
      Anonymous

      Bad for a few reasons.
      >oil wicks into primers = deactivated/dud primers = no bang
      >oil on ammo = higher pressure exerted on bolt if bang
      >oil on bullets = potential damage to barrel due to trying to compress oil between the bullet and bore - maybe? (can't be sure on that one but I swear I remember hearing it, but no data IIRC)
      So don't. If you're that autistic about your ammo, the problem is really oxygen and moisture collecting. When it's sealed, you don't get more oxygen than is already in there, nor moisture. Other than (very fast) large swings in temperature, not much will make the water condense. Don't open it if you don't need to. Buy some metal ammo cans even if just from Harbor Freight; air can pass through plastic but not metal. Real world test on point 2: https://youtu.be/7bhWxFbYdyw?t=758

    • 6 days ago
      Anonymous

      Bad, Primers are dissolved by oil and rendered semi-inert (no bang but still sometimes burns).

  63. 1 week ago
    Anonymous

    >no /pcc/
    Sad
    Hey frens, wondering if you think the vector is good in 9mm or should I go for .45?
    It’s such a cool gun I want one

    • 1 week ago
      Anonymous

      Also, is maintenance a pain in the ass with a vector?

    • 6 days ago
      Anonymous

      Doesn't the vector have an interchangeable receiver area for that? You could probably buy one for each caliber you want and swap them out as you please. But I'm also not familiar with the civie versions so I don't know if it's any different. Also don't know much about maintenance. Hope what little I can offer helps somehow.

    • 6 days ago
      Anonymous

      Also, is maintenance a pain in the ass with a vector?

      The one of our range is in 9mm and it isn't the most reliable gun we got, by far. Maintenance will be easier on ar-9's and the likes. Controls for the bolt aren't great. They're a fun novelty in the beginning, but in the end they're just overpriced pcc that have no point in semi auto imo. I'd advise to keep your money and get something else.

  64. 1 week ago
    Anonymous

    What are good brands for 1911's? There's like, a gorillion out there. I don't need some top of the line rich people 1911, but I don't want pure chinesium.

  65. 1 week ago
    Anonymous

    This is going to be a very long shot but did the british consider rearming their lend-lease Shermans with Browning .303 Mark II to simplify logisitcs? I'm not sure whether the Mark II would be suitable for tank use but enough of them were made for it to be feasable to do so.

  66. 1 week ago
    Anonymous

    Do the new series Beretta 92s take the older gen mags? I got some surplus M9 mags/ I wanna know if they'll work in a newer 92.

  67. 1 week ago
    Anonymous

    how to recreate 90s seal team loadout? idk what they are wearing outside the protac helms

  68. 1 week ago
    Anonymous

    can someone with an m1 magazine please post a pic of you gripping it? I wanna see how thick it is

    • 6 days ago
      Anonymous

      I don't own one but I've handled a repro once. The magazine is similar in size to a pistol mag. Like put two aluminum 9mm doublestack mags together back to back and that should be about it I think. They're definitely more like subguns than rifles, I'd argue that the M2 and M3 were really just beefy submachine guns rather than low-powered rifles.

  69. 1 week ago
    Anonymous

    If a round doesn't go off in a revolver, and you cycle to the next round in the cylinder, but the previous round goes off afterwards, doesn't the revolver just explode in your hands or at least scrape alongside the barrel or anything else?

    • 1 week ago
      Anonymous

      Depends. In BP revolvers (non cartridge), it's usually fine. I'd imagine it's a little more violent in a smokeless cartridge using revolver, though.
      https://www.youtube.com/watch?v=O0UhrosruB8

    • 6 days ago
      Anonymous

      Look up chain firing, it is not what you described but the results (round in revolver chamber going off that is not aligned with barrel) are the same.
      What you are talking about is delayed ignition (sometimes called a hang fire) and is much rarer with modern (post-ww1) ammo.

  70. 1 week ago
    Anonymous

    Why are MAWLS so expensive? what do they do that other illuminators don't?

  71. 1 week ago
    Anonymous

    I just got a surplus M16A4 pistol grip at a gun show, and was wondering if you guys have any advice on attaching it to a Mossberg Security (the one with the traditional-shaped polymer stock) before I start drilling. Also you can't call me a retard for buying it since it was $3

  72. 1 week ago
    Anonymous

    What do you know about the Taurus PT99? Any and all info is appreciated
    Diagrams, cheap parts, photos, opinions
    pic unrelated

  73. 7 days ago
    Anonymous

    Don't they teach soldiers not to go in the open like this?

  74. 7 days ago
    Anonymous

    who makes a good threaded 1911?

  75. 7 days ago
    Anonymous

    [...]

    There were no tags, no markings. Did early PASGT vests have the string fasteners on the sides?

    • 6 days ago
      Resident Wumbologist

      I was able to find this.
      https://www.worthpoint.com/worthopedia/m69-flack-vest-1969-dated-1848292094

      If it's the same item it's probably an M69 vest that was made in a limited run with early woodland camoflage.

      Having messed with both M69 and PASGT vests in the past I know that the M69 is much bulkier and heavier than the PASGT. Do you know how much yours weighs per chance? That would probably be the dead giveaway if it's kevlar or ballistic nylon.

      https://i.imgur.com/z3zvPiW.jpg

      Two questions.
      Question 1: I've tried shooting my Star Model 30 and my aim is kinda shit. Tried this after switching from shooting my AR to shooting my pistol. My AR groups were actually great, but the Star had terrible accuracy at less range. I felt like the recoil was wrong somehow, I'm more used to revolvers. I was shooting 115 grain bullets, 9mm. Should I be using another ammo type or am I just gonna have to train this out somehow?
      Question 2: a girl I know just sent me a pic of a gun and a vibrator on her beside table and said "either way I'm busting". She's told me she browses this site so I don't know if I should post this here. I've cropped the image so only the gun is visible. Firstly, what gun is this? Also sorry for the quality. Original is better but I'd rather not post the full thing just in case. Secondly, what the FUCK does this mean? Did she send me this by mistake or something? At the risk of repeating myself, keep in mind this was right next to a vibrator. I don't think I've ever disclosed my PrepHole interests to my coworkers before so there shouldn't be a way this was targeted at me right? Or perhaps it was just obvious? I live in a deep red state so it could also just be coincidence. Do women normally show platonic guy friends this kind of stuff?

      Handguns in general are tricky to shoot well. Star M30 if I recall correctly is a DA/SA design so they tend to have less than stellar triggers. Practice more, and failing that check sight alignment.
      The girl's gun is a SCCY, a really cheap Kel-Tec knockoff. Sounds like she is implying that she is very depressed and treats it with masturbation, potentially inviting you to make it less of a one-person sort of thing. I'd seek clarification from her if that's what she means before running in dick first, but even then you probably shouldn't since she probably has a lot of screws loose.

      https://i.imgur.com/WATgt1W.jpg

      Can I get an honest opinion of the Citadel 1911? I’m on a budget and I want a 1911 simply to have one. If it makes any difference I’m also a CA resident and this particular pistol has came up in my research for complaint 1911s. The few things I have seen suggest it is an ok enough entry level (price wise) 1911

      It's basically an RIA with nicer features.
      Only downside is that from the ones I've handles some of the machining isn't rounded off leaving somewhat sharp edges on things like the slide serrations.

      Is it a sign of the lockup getting weaker if the slide automatically releases just by me putting a new mag in without me pressing the slide release?

      That would be a slide release issue rather than slide to barrel lockup.

      • 6 days ago
        Anonymous

        I didn’t buy it, but I do have a ballistic nylon ass protector from Vietnam, the kind helicopter pilots wore. It was definitely thinner than the ass protector, not terribly heavy but not light. I think it would have to be late production ballistic nylon vest, like around when they were testing or just started producing M81 Woodland

  76. 7 days ago
    Anonymous

    How varied are aftermarket frame grips for 2011's? Are there grips out there that have more of a CZ feel to the grip? Just how much can I customize/personalize a 2011?

  77. 7 days ago
    Anonymous

    why didnt they do rocketball like this? i get the bullet itself probably has awful ballistics, but if you did 9mm or something small for really small subguns and shit, why not?
    the primary problem with rocket ball was it was underpowered and couldnt have much powder, so why not make more space?

    rocket cylinder, not rocket ball

    • 7 days ago
      Anonymous
    • 6 days ago
      Anonymous

      With modern gunpowder you don't even need to lengthen it. The old-school rocket ball load was 6-7 grains of black powder. The modern 9mm load is about 6 grains of smokeless. Just stick smokeless powder in it and it's viable.
      That said, rocket ball arms have other disadvantages. For example, there's no ejector, extractor, or ejection port so clearing the gun without shooting it is rather difficult.

    • 6 days ago
      Anonymous

      https://i.imgur.com/vAr3B1R.jpg

      They (Swedes in this case) actually did exactly what you are proposing. The Italians did the same thing too, with 9mm AUPO and made a sub gun for it.
      https://en.wikipedia.org/wiki/Benelli_CB_M2
      >Why didn't it take off?
      Despite what wiki claims, it still had and needed an extractor and ejector for duds and malfunctions and clearing it, meaning it had all the same parts of a regular 9mm but worse.
      It costs money to switch to new guns
      It requires much tighter tolerances to get a gas seal as the casing no longer provides that around the chamber locks and firing pin hole(s)
      Slightly improved ballistics (iirc <5% for same powder and bullet weight) are not enough in a world where everyone wants %200 improvement minimum aka the reason why others like the G11 or Steyer ACR wasn't adopted by everyone.

  78. 7 days ago
    Anonymous

    boop

  79. 6 days ago
    Anonymous

    Two questions.
    Question 1: I've tried shooting my Star Model 30 and my aim is kinda shit. Tried this after switching from shooting my AR to shooting my pistol. My AR groups were actually great, but the Star had terrible accuracy at less range. I felt like the recoil was wrong somehow, I'm more used to revolvers. I was shooting 115 grain bullets, 9mm. Should I be using another ammo type or am I just gonna have to train this out somehow?
    Question 2: a girl I know just sent me a pic of a gun and a vibrator on her beside table and said "either way I'm busting". She's told me she browses this site so I don't know if I should post this here. I've cropped the image so only the gun is visible. Firstly, what gun is this? Also sorry for the quality. Original is better but I'd rather not post the full thing just in case. Secondly, what the FUCK does this mean? Did she send me this by mistake or something? At the risk of repeating myself, keep in mind this was right next to a vibrator. I don't think I've ever disclosed my PrepHole interests to my coworkers before so there shouldn't be a way this was targeted at me right? Or perhaps it was just obvious? I live in a deep red state so it could also just be coincidence. Do women normally show platonic guy friends this kind of stuff?

    • 6 days ago
      Anonymous

      dogshit pistol, worst grip ever, she will probable bend your dick in half durring foreplay due to her deformed hands if shes can actually hold that thing and think "yeah, ill buy this!" over literally anyother gun.

      • 6 days ago
        Anonymous

        I mean I bought a RIA M206 so maybe it was meant to be. If this has a shit grip mine must be worse (and I don't even protest that, I'm a weirdo with a hitchhiker's thumb)

        Funny thing is I also started shooting handguns with a revolver and bought a Star (BM) as my first 9mm. The weirdest thing is that out of all the times I tried to shoot it, it didn't group great. But once I was changing targets, alone, so I went downrange and drew it and fired a mag just out of curiosity. Best damn group I've ever shot with that handgun to this day. So maybe try shooting it without putting TOO much thought into it and too much fussing with your grip? Idunno.

        I'll try it. I think later this week I'll bring it with me to the range and probably not fuss with the AR this trip, I'll just bring this and my carry revolver and see if I can do anything with some more shooting experience. At the least I'd like to compare how my groups are with both. Probably sounds hard to believe but the Star is barely used, previous owner put two mags through it, cleaned and oiled it, and left it in the case for years until he had to sell it to pay off a debt.

        I was able to find this.
        https://www.worthpoint.com/worthopedia/m69-flack-vest-1969-dated-1848292094

        If it's the same item it's probably an M69 vest that was made in a limited run with early woodland camoflage.

        Having messed with both M69 and PASGT vests in the past I know that the M69 is much bulkier and heavier than the PASGT. Do you know how much yours weighs per chance? That would probably be the dead giveaway if it's kevlar or ballistic nylon.
        [...]
        Handguns in general are tricky to shoot well. Star M30 if I recall correctly is a DA/SA design so they tend to have less than stellar triggers. Practice more, and failing that check sight alignment.
        The girl's gun is a SCCY, a really cheap Kel-Tec knockoff. Sounds like she is implying that she is very depressed and treats it with masturbation, potentially inviting you to make it less of a one-person sort of thing. I'd seek clarification from her if that's what she means before running in dick first, but even then you probably shouldn't since she probably has a lot of screws loose.
        [...]
        It's basically an RIA with nicer features.
        Only downside is that from the ones I've handles some of the machining isn't rounded off leaving somewhat sharp edges on things like the slide serrations. [...]
        That would be a slide release issue rather than slide to barrel lockup.

        Well, my groups are pretty bad so I doubt it's the sights at the moment. I've shot a Beretta 92 just fine so I'm not sure why the Star's acting up. Is it just that I shot it after shooting my rifle? I haven't been able to test it so it could have just been that I wasn't accustomed to the lighter weight after handling my AR for so long and it was just a bad time to start shooting it for the first time. Would that affect it significantly? Do you normally need to train on shooting handguns right after shooting your rifle for long periods? May sound dumb of me but I can't recall doing that before. Maybe I have once, I don't remember.
        I don't think she'd be depressed, as long as I've known her she's been very upbeat and outgoing. Is this how normals flirt? Is she autistic if not? Still, I'll check in to see if she's doing alright.

        Is this a new pasta? I think I missed the memo.

        No, I'm being serious

    • 6 days ago
      Anonymous

      >tfw no PrepHole gf

    • 6 days ago
      Anonymous

      Funny thing is I also started shooting handguns with a revolver and bought a Star (BM) as my first 9mm. The weirdest thing is that out of all the times I tried to shoot it, it didn't group great. But once I was changing targets, alone, so I went downrange and drew it and fired a mag just out of curiosity. Best damn group I've ever shot with that handgun to this day. So maybe try shooting it without putting TOO much thought into it and too much fussing with your grip? Idunno.

    • 6 days ago
      Anonymous

      Is this a new pasta? I think I missed the memo.

  80. 6 days ago
    Anonymous

    Anybody know where I could get a scope mount for an old Marlin 81?

    • 6 days ago
      Anonymous

      Factory drilled? Check if Weaver makes a base/two piece base set for the Marlin 81. If not, check if any of them have the same screw spacing; the 10/22 TO9 isn't even 10/22 specific and has two extra holes at the bare minimum. Ditto many other Weaver bases.

  81. 6 days ago
    Anonymous

    Can I get an honest opinion of the Citadel 1911? I’m on a budget and I want a 1911 simply to have one. If it makes any difference I’m also a CA resident and this particular pistol has came up in my research for complaint 1911s. The few things I have seen suggest it is an ok enough entry level (price wise) 1911

    • 6 days ago
      Anonymous

      i have one. it runs everything i put through it. they like to be lubed up. idk man if you just want a 1911 its a fine gun.

      • 6 days ago
        Anonymous

        Good enough for me, that’s all I wanted. Cheers

  82. 6 days ago
    Anonymous

    Anyone have the screencap of that story where anon and his buddies rob a cartel speedboat on the open seas? Been lookin for ages.

  83. 6 days ago
    Anonymous

    Is it a sign of the lockup getting weaker if the slide automatically releases just by me putting a new mag in without me pressing the slide release?

    • 6 days ago
      Anonymous

      not at all. if the slide autoforwards or not depends on your reload technique. the more you rush it or jolt the gun the more likely it is to close on its own.

      • 6 days ago
        Anonymous

        I just wonder cause I have a Walther PPQ Q4. I do kinda ram it in but also I run +P through it even though it's not technically rated for that. I've been assured it actually can run the +P though just expect to change out the barrel earlier. Which is fine because I can get a heavier duty aftermarket barrel anyways or just upgrade to the PDP.

  84. 6 days ago
    Anonymous

    Can I use lucas oil extreme gun grease for my AR-15 barrel nut? I just want to finish my M16A1 build.

  85. 6 days ago
    Anonymous

    >Be me
    >Firearm Enthusiast
    >Been told I've got a natural talent for it
    >Been told I should go into competition
    >Average 24 hits in a 25 clay round.
    >MFW I'm a Britbong
    >MFW I'm a poorfag Britbong who can't afford a Shotgun license or safe
    >MFW the only hope I have is to get to the States like Ian Harrison
    >MFW American GF broke up with me
    >MFW Unvaxxed and can't enter into the USA
    Anons this pain train is seemingly unending I just want to own a small enough arsenal to rival the Mexican Army's and I fear whilst the rest of the world has forgotten about COVID, Canada and the United States seems to be hell bent on making people COVID schizos

    • 6 days ago
      Anonymous

      Just fly to Mexico and sneak across the border. Everyone else in the world is.

      • 6 days ago
        Anonymous

        (Checked)
        Call me a sucker but as someone who unironically wants to be a citizen, I want a squeaky clean record, if I wanted to fly to Europe alone, I'd have lied about my Vaxx Status and Gaslit the NHS ages ago, just I don't want to risk it Anon.
        If the border is still closed to the unvaxxed after 2024 I'll wear a sombrero and wear some fake tan.
        Captcha: W2 OMG

        • 6 days ago
          Anonymous

          I'm sorry to say it, but you have a faster path to citizenship coming over as an illegal immigrant from Mexico than as a legal immigrant from bongistan. Just take the dreamer pill and come shoot with us.

          • 6 days ago
            Anonymous

            Anon... You're starting to glow a little.
            The issue is, even if I am Hwite and Anglo, the absolute quagmire of legal ambiguity of being an illegal immigrant in the US seems to be a special form of Hell in of itself.
            Still they should be deported one and all.

            • 6 days ago
              Anonymous

              I'm half joking of course, but it's sadly true. Should people just be able to barge in and live here? Absolutely not. Do they? Yes, and they get citizenship faster than people who ask permission first. From what I understand you are looking at 4-5 years and several thousand dollars to get legal citizenship.

  86. 6 days ago
    Anonymous

    Anyone know of some good, lightweight cargo/"tactical" pants that can be worn in hotter climates?

    Wanna be able to wear cargo pants in the summer but a lot of shit I'm finding is made of heavier material. I've seen a lot of people talk about 5.11 but I don't wanna look like a tacticool try hard. I just like muh pockets.

    • 6 days ago
      Anonymous

      Wrangler atg pants if small pockets work. Nylon and spandex are great for summer. Florida anon reporting

  87. 6 days ago
    Anonymous

    does anybody have sauce on that short film of a russian soldier talking to his mother while images of dead soldiers flashes on the screen

  88. 6 days ago
    Anonymous

    The mods need to step up their game in swatting4chan tards. They've been shitting up this board like crazy.

    • 6 days ago
      Anonymous

      This. The stormfags are really lashing out now that it looks like Russia is facing total defeat.

  89. 6 days ago
    Anonymous

    Hey so I have a Walther PPQ Q4 you know this because I already posted in this thread. Anyways I just field stripped it for cleaning and this piece just fell out of it and I don't know where it goes. Anyone have any ideas?

    • 6 days ago
      Anonymous

      nothing about it in the manual?

      • 6 days ago
        Anonymous

        Don't worry about it, it was the cap to my cleaning solution. I'm just stupid.

        • 6 days ago
          Anonymous

          you know i'm a lenient judge, but unfortunately these offenses carry minimum sentences...

  90. 6 days ago
    Anonymous

    Why is the Val shit? I saw a few anons here say that it wasn't as cool as most people thought it was, but why?

  91. 6 days ago
    Anonymous

    Is there a 2022 equivalent to how the SKS used to be? Basically a cheap starter rifle-caliber rifle I could buy on a college budget. Is the closest a $500-$600 AR?

    • 6 days ago
      Anonymous

      probably.

  92. 6 days ago
    Anonymous

    what's a good cheap mag-fed 22 rifle for plinking? is there significant performance difference between say a savage mark ii, savage 64 series, and rossi rs22? how about mag availability/compatibility? anybody i'm sleeping on?

    • 6 days ago
      Anonymous

      I have a savage 64f, only issue is that you need to be sort of precise on how far you put the mag in or else it won’t feed correctly. The other’s I don’t know. Also, Savage’s have a lot less aftermarket parts and the only magazine available retail is a 10 rounder. Savage started making a 20 rounder for their new tactical 64 model recently, but it isn’t available for sale seperate from the rifle yet

    • 6 days ago
      Anonymous

      Marlin used to be that with the 60 or 795. It was like 50 bucks more than the cheapest 22s like what you listed but twice the gun in terms of quality. Unfortunatly ruger owns marlin now and that whole line which was the main competitor to the 10/22 is dead.

      • 6 days ago
        Anonymous

        alternatively, are there any tricks to making bolt action more fun?

  93. 6 days ago
    Anonymous

    What’re some good budget 12 gauge rounds that aren’t birdshot? I want something that can actually down something at a distance but won’t feel like I’m draining all my cash for practicing with them

  94. 6 days ago
    Anonymous

    What's the best all around clp?

Your email address will not be published.