/Akg/ is probably the last general that isn’t filled with chuds and Reddit fags. /arg/ is filled with degenerates and has been for as long as I can remember. If you want to see how shitty this board has gotten, stroll through patch threads or any Ukraine shill threads. Most of the patches are for fags morons trannies and any other mentally disabled individual.
I got lucky and picked mine up from a friend during peak coof. Never been fired and came with 250 rounds of ammo and 6 mags. $450 out the door. (He was in desperate times about to lose his car)
Things so overgassed though it kicks harder than my m1a by double easily.
No idea but it runs like an absolute champ. Havent had a single issue with it so haven't felt the need to add stronger springs or whatever else to tame the recoil. It easily sends steel cases 20+ feet to my right and 10-15 feet high lol it now mainly just sits in my safe and only shoot it when I'm in the mood.
I will say with some cheap steel mags like KCI they had a good bit of wobble so I remedied it by just buying polymer Bulgarian mags.
But yeah, I'm sure someone can come along and tell hithbif us why it's so overgassed and a common theme with Wasr10s, specifically.
My WASR magwell is clapped out as well, Romanian surplus mags have a good deal of wobble too but its cosmetic. Gun kicks a lot more than my AR but its not .308 tier.
Yeah mine borders 30-06 honestly lmfao. It's not a big deal just annoying trying to get a good cheek weld on an already awkward height and keeping it without have to re-adjust even 5 or so rounds. Do you know anything about the gas blocks they put on the "V2"? I don't know if they changed all wasrs but mine came with a different one. I'll try and find a pic
You can see how the gas block is crazy slanted in comparison to other AK gas blocks, even other wasr10s.
Mines an earlier V2, slanted just as much. I just deal with the recoil, havent bothered on doing anything to modify the recoil besides outting a hard rubber pad on the wooden buttstock to give it a non starving conscripts lop.
2 weeks ago
Anonymous
>Mines an earlier V2, slanted just as much
Ok I figured it was just on the V2 models since it's the only place I've seen them. Outside of the norm or not eye pleasing to some, I don't care. >just deal with the recoil, havent bothered on doing anything to modify the recoil besides outting a hard rubber pad on the wooden buttstock to give it a non starving conscripts lop.
Yeah I haven't touched anything with mine since it runs so well. Recoil doesn't bother me but I'll look into a rubber pad to I can raise my head a little higher and still get a good weld and HOPEFULLY not have to re-adjust every now and again.
Overall I'm pretty happy with it, especially for price I paid.
Something I meant to add is its the "v2" that came with plastic furniture I swapped out for wood and a weird east german style gas block. It's a lot more sloped than standard gas blocks. I'm not sure why the change but oh well. Can't complain for less than 350 if you take out mags and ammo
A WASR is not a VSKA. Theres a difference between zoomers crying about an AKM made to handle shit tier ammo and an American made abomination destroying itself in 600 rounds.
>Midway actually has a good deal on a gun
Never thought I'd see the day. Not going to say to not get this since it's the best price by a decent margin, but these fucking fudds stopped shipping mags to Oregon and Washington before their mag bans went into effect. I am now going to buy at Brownells when I can
Yes newer WASRs are over gassed more than most at 500 rounds if it still bugs you go with KNS adjustable gas piston. 500 rounds because every thing will be broken in and settled so you can set the piston and it should stay.
>buying an ak
how is zirs SRS going, lots of dilating yes?
why are so many of them tankies, anyway? soviets hated fags. also, what if op is just a wannabe stalker? those guys like cheap aks, too
/Akg/ is probably the last general that isn’t filled with chuds and Reddit fags. /arg/ is filled with degenerates and has been for as long as I can remember. If you want to see how shitty this board has gotten, stroll through patch threads or any Ukraine shill threads. Most of the patches are for fags morons trannies and any other mentally disabled individual.
Nah, /NVG/ is the only good general.
actually it's /psg/
It has a lot to do with the GOP wanting them "eradicated."
Thats a NATO member import retarded pajeet dumbfuck
Seek help for your obsession
pathological obsession
cope
I don't see $499
Adjust those 2011 prices to 2023 inflation
Closer than I expected, but still a ways to go
Anon it isn't January 2023 it's March 2023
It takes time for nature to heal, it is a process
Good price but that rifle should only be had with a drum mag
I got lucky and picked mine up from a friend during peak coof. Never been fired and came with 250 rounds of ammo and 6 mags. $450 out the door. (He was in desperate times about to lose his car)
Things so overgassed though it kicks harder than my m1a by double easily.
>Things so overgassed though it kicks harder than my m1a by double easily.
Not the first time I have heard about this happening. Why is it so common?
No idea but it runs like an absolute champ. Havent had a single issue with it so haven't felt the need to add stronger springs or whatever else to tame the recoil. It easily sends steel cases 20+ feet to my right and 10-15 feet high lol it now mainly just sits in my safe and only shoot it when I'm in the mood.
I will say with some cheap steel mags like KCI they had a good bit of wobble so I remedied it by just buying polymer Bulgarian mags.
But yeah, I'm sure someone can come along and tell hithbif us why it's so overgassed and a common theme with Wasr10s, specifically.
My WASR magwell is clapped out as well, Romanian surplus mags have a good deal of wobble too but its cosmetic. Gun kicks a lot more than my AR but its not .308 tier.
Yeah mine borders 30-06 honestly lmfao. It's not a big deal just annoying trying to get a good cheek weld on an already awkward height and keeping it without have to re-adjust even 5 or so rounds. Do you know anything about the gas blocks they put on the "V2"? I don't know if they changed all wasrs but mine came with a different one. I'll try and find a pic
You can see how the gas block is crazy slanted in comparison to other AK gas blocks, even other wasr10s.
Mines an earlier V2, slanted just as much. I just deal with the recoil, havent bothered on doing anything to modify the recoil besides outting a hard rubber pad on the wooden buttstock to give it a non starving conscripts lop.
>Mines an earlier V2, slanted just as much
Ok I figured it was just on the V2 models since it's the only place I've seen them. Outside of the norm or not eye pleasing to some, I don't care.
>just deal with the recoil, havent bothered on doing anything to modify the recoil besides outting a hard rubber pad on the wooden buttstock to give it a non starving conscripts lop.
Yeah I haven't touched anything with mine since it runs so well. Recoil doesn't bother me but I'll look into a rubber pad to I can raise my head a little higher and still get a good weld and HOPEFULLY not have to re-adjust every now and again.
Overall I'm pretty happy with it, especially for price I paid.
Something I meant to add is its the "v2" that came with plastic furniture I swapped out for wood and a weird east german style gas block. It's a lot more sloped than standard gas blocks. I'm not sure why the change but oh well. Can't complain for less than 350 if you take out mags and ammo
Century builds, they like to error on the side of
>will beat itself to pieces
In their tuning.
A WASR is not a VSKA. Theres a difference between zoomers crying about an AKM made to handle shit tier ammo and an American made abomination destroying itself in 600 rounds.
What is with you retards constantly bitching about zoomers in any thread with commbloc guns
Because zoomers are allergic to recoil in semi auto guns.
Why does it looks so dogs hit and soulless
the SOVL comes from using it. When it's dinged and scratched up it it will look soulful
arsenals and izhmashs look soulful right out of the box, though
Disagree, no AK looks soulful fresh from the factory
>arsenal
>soul
That's the shitty finish scratching off
>Midway actually has a good deal on a gun
Never thought I'd see the day. Not going to say to not get this since it's the best price by a decent margin, but these fucking fudds stopped shipping mags to Oregon and Washington before their mag bans went into effect. I am now going to buy at Brownells when I can
Yes newer WASRs are over gassed more than most at 500 rounds if it still bugs you go with KNS adjustable gas piston. 500 rounds because every thing will be broken in and settled so you can set the piston and it should stay.
>$730
>for a fucking ak
akfags deserve everything they get.
Its 600 for a trash tier AR these days, a 730 dollar import made on soviet tooling is a fucking steal in comparison.
You can buy a shit stick ar for $450-$500.
Woah look at Mr. Big Spender over here
The difference is that a shit stick ar15 will still fucking work. Shit stick aks are complete trash. They flipped the fucking table on you retards.
A WASR will outlast shit ARs by multiple guns. You either buy a good imported AK for the price you can get or you buy trash US made ones.
>t. owns neither
Yeah, an even shittier than PSA AR. At sub 800 dollars its garbage or second world tier guns made half decent.
You can put together an AR for under 400 if you get lucky on some sales
B42
>nature is healing
>WASR still over $400
>”people” where spending this much on a shit ak
woof