Mower help pls

>"Ground coil to block to kill spark"
>"remove ground clip to start with coil"
The fricking coil clip on the coil is grounded to the block. What the actual frick. What the hell do I do now?

Sorry for sideways pls help

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 3 weeks ago
    Anonymous

    zoom zoom

    • 3 weeks ago
      Anonymous

      I'm 50 you colossal frick. Sitting in a garage on my phone not going to watch videos where shit just starts for an hour. Frick off if you don't know engines.

      • 3 weeks ago
        Anonymous

        >extremely simple problem
        >cant solve it
        ok boomer.

        • 3 weeks ago
          Anonymous

          Easy to say but I dont see you solving it. New carb, new coil, og spark plug, no gas going in fired with direct gas in cylinder. Im taking off the exhaust now but feel free to explain what is so simple you toolless troll.

  2. 3 weeks ago
    Anonymous

    chinkshit coils are often doa. they do a shitty job insulating inside and they short out. try another coil

    • 3 weeks ago
      Anonymous

      It fires if I directly inject into cylinder, I went thru old carb again, it's all clean bowl is fill, but no gas going into cylinder as fast as I can tell. I ripped up some alligator clips to have wire to shove through jets, perfectly clean ofc.

      • 3 weeks ago
        Anonymous

        I'm spitballing, but it sounds like it's the carb. I'd consider trying to run it with the gas cap off, in case the vent lines are plugged and your not getting airflow to actually push gas through the carb. Old motorcycle of mine used to do that - it would stumble and die or just not start until I opened the cap, and the moment I did, she was aces. Especially if it fires when you directly put fuel in, but it won't flow otherwise, I'd give that a shot. Soaking the cap in your favorite carb cleaner or just running a wire through the vent tube might just solve it. If you already have the carb off, I'd eyeball the float height and make sure the float isn't sticking or wedged at an slight angle - I've done that to a carb that gave me fits until I figured out I had just picked it up or put it down wrong once and jammed the float a few degress askew.

        • 3 weeks ago
          Anonymous

          >I'm spitballing
          Exactly what I need. I been cracking the cap or even leaving it off. Every time I put the carb back the float bowl fills/is full when I pull it. That goes for old new and hybrid carb. Good suggestions though.

      • 3 weeks ago
        Anonymous

        >I went thru old carb again, it's all clean bowl is fill, but no gas going into cylinder as fast as I can tell
        then carb is not clean

  3. 3 weeks ago
    Anonymous

    do you or do you not have spark?

    • 3 weeks ago
      Anonymous

      Ah yes here's the rub. Get your answer cards ready for everyone who "knew" but wouldn't say I'm sure you had exactly this:
      >the tiny front bolt that held the coil gap was stripped by some former jackass SO one side was slipping: pushed out enough to spark when starting but then quickly being pulled back and grounding coil- flywheel and thus killing the spark. Resetting to pull again would reset the gap enough to spark a few revolutions before grounding again.

      Everyone who had that answer please collect your internets at the door. Everyone who helped with ideas and suggestions look for my next thread: how the frick do I tap and rethreadmy block.

      • 3 weeks ago
        Anonymous

        why can't you just say no?

      • 3 weeks ago
        Anonymous

        boomers and their tiresome walls of text

      • 2 weeks ago
        Anonymous

        This boomer is even more moronic than a zoomer. There is no way someone is actually this moronic so this thread has to be bait.

  4. 3 weeks ago
    Anonymous

    WELL BUDDY I'D "START" BY THROWING THAT CHINESE PIECE OF GARBAGE RIGHT INTO THE DUMPSTER HAR HAR HAR
    ANYWAYS YOU GOTTA FIGURE OUT WHAT YER NOT GETTIN
    SPARK OR AIR OR GAS
    ONCE YOU FIGURE THAT OUT WELL YOU'RE HALFWAY THERE. WISH MY WIFE WAS HALFWAY OUT THE DOOR BUT HER FAT ASS WOULDN'T FIT!!!!!
    TRIED TO TEACH MY SON IN LAW HOW TO FIX MOWERS ONE WEEKEND BUT HE'S ONE OF THOSE DARKIE FELLAS AND JUST COULDN'T GRASP IT. I LEFT HIM ALONE TO CHANGE THE OIL ON MY MOWER AND WHEN I GOT BACK HE WAS GONE WITH MY DAUGHTER PROBABLY GAVE UP LIKE I GAVE UP ON HER AFTER BRINGING HOME A Black BOY!! HEY BY THE WAY HAVEN'T BEEN ABLE TO FIND MY POWER TOOLS SINCE THAT DAY YOU MIND LENDING ME A DRILL? WIFEY WANTS A DAMN MIRROR HUNG UP IN THE BEDROOM NOT SURE WHY DAMN THING PROBABLY GOING TO CRACK THE SECOND SHE LOOKS AT IT.
    SO YEAH BUDDY JUST START WITH THE BASICS YOU'LL GET THAT PIECE OF SHIT RUNNING EVENTUALLY
    ---------------------------------------------
    "The Dream Machine"
    1998 Chevrolet Cavalier 2d coupe
    "The Grocery Getter"
    2016 Silverado Custom
    "The Wife's"
    2018 Honda CRV
    SEMPER FI
    USMC 1978-79
    USPS 1979-2009
    Retired and enjoying it!!!
    "In the first place, God made idiots. That was for practice. Then he made DEMOCRATS!!!"
    -Mark Twain

Your email address will not be published. Required fields are marked *