Looking for Design Feedback Again

I know you all are design engineers so I value you're input highly. I have made some improvements and would like your feedback...

Caliber: 9mm Luger
Capacity: 10 rounds flush, 10+ extended - same as p365
Total Length:8.0"
Total height:4.6"
Width: frame = 1.0", Grip to grip (max width) = 1.25"
Bore Axis: -0.255" (Laugo Alien: -.065")
Magazine: P365, modified end plate
Barrel Length: 5.125"
Locking / Delay Mech: Gas Delayed (HK p7, Laugo Alien)
Frame: Aluminum, clamshell design, physical locking features for every bolt. single piece frame design is an opportunity for increased cost.
Trigger: straight pullback, short reset
firing mechanism: striker
Safeties: Drop safety (trigger dingus not modeled yet), trigger safety. mechanical safety (disallows trigger pull, not modelled yet
Grips: replaceable left and right (1911 style), replaceable back strap
Ambi features: magazine release only
Other: integrated rail, 1911 (novak) sights - readily accessible
"perceived recoil reducing features"
Optics mount

Key focus areas:
Lowest bore axis possible
ergonomics
Fixed barrel (accuracy)

https://imgur.com/a/2MUULJy

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 1 year ago
    Anonymous

    Make it .327 SIG instead

  2. 1 year ago
    Anonymous

    Your design was terrible last time and its still bad although improved. My main criticism is that bore axis and gas delayed action is pointless in 9mm and that its fricking ugly with marginal benefits compared to modern designs.
    Keep it up though, I like your enthusiasm.

    • 1 year ago
      Anonymous

      what mm would you recommend for this design?

      • 1 year ago
        Anonymous

        9x25 Dillon if we're just making shit up. The grip appears long enough back to front to accommodate it. With the pressures you'd be looking at for spicy loaded ammo you may see a benefit with such an unusual action and design. Make it worth shooting a Black person with, because right now no one would even look at it.

        • 1 year ago
          Anonymous

          the point of this design is to literally eliminate the need for such a stupid round. also, your ability to articulate your feelings has provided me with the confidence to call you a fricking idiot. good luck navigating through life I wish you the best.

          • 1 year ago
            Anonymous

            NTA but 9x25 is the most based pistol caliber in existence and if you disagree you can go take 9 x 25 dicks from men named Dillon.

  3. 1 year ago
    Anonymous

    Isn't this basically just a mashup of that Maxim gun with the integrated suppressor and that one gun with the perfectly machined slide?

  4. 1 year ago
    Anonymous

    Can you explain where your breech, extractor, and ejection port are going to be located?

    • 1 year ago
      Anonymous

      on the other side like every other handgun.

  5. 1 year ago
    Anonymous

    I know this is probably early on in the design, but bevel some of those hard edges chief

  6. 1 year ago
    Anonymous

    I really like it OP but I would make it 7-9x bigger

  7. 1 year ago
    Anonymous

    Pretty cool but I would square the size at least twice

  8. 1 year ago
    Anonymous

    >Total Length:8.0"
    >Capacity: 10 rounds flush
    how did you manage to make something so moronic right off the bat?

    • 1 year ago
      Anonymous

      well to be honest it all started by not considering how poorly most of the people on this board can actually shoot. I totally forgot you all need a minimum of 15 rounds to actually hit something other than dirt.

    • 1 year ago
      Anonymous

      not OP bit I 3d printed a g19 with a 26 length grip and it fricking rules. I wish modern manufacturers would make more "longslide subcompacts" because you get better ballistics with a jist as concealable profile. frick off, more power to you OP, I like the thumb ledges but maybe experiment with levelling off that bottom edge of the depression, make it closer to horizontal?

      • 1 year ago
        Anonymous

        which depression are you referring too?

        • 1 year ago
          Anonymous

          the thumb ledge, depressed into the frame

  9. 1 year ago
    Anonymous

    Finally, a gun that absolutely cannot be fired left handed. Frick all wrong-handed southpaw sinistroids.

    • 1 year ago
      Anonymous

      Most of us can shoot pistols either handed, it’s rifles that give us trouble.
      Sorry single hand cuck, maybe next design.

  10. 1 year ago
    Anonymous

    The best advice I can give you is that you should shell this and print it out with minimal infill. Hold it, point it, get a feel for how it handles and maybe put weights (rod for the barrel, block for the loaded magazine) in the appropriate places to figure out the balance. Make adjustments to the design based on your handling tests and repeat until YOU are satisfied with your work. And don't go down a rabbit hole chasing perfection. Perfect is the enemy of good enough.

  11. 1 year ago
    Anonymous

    Will it provide adequate protection against black people?
    What about Detroit black people?

  12. 1 year ago
    Anonymous

    better from last time op
    give it a fast back (picrel)and ill buy it thanks for adding rail and slide release
    Don't know if you know this the laugo alien heats up really bad to the point that it burns you because the barrel is buried in the gun keep that in mind for the bore axis youre chasing

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *