Why would you want it? That legitimately looks like one of the worst handgun designs in history.
I get same feeling about it like when I'm cutting down a tree, spot something shiny in the sawdust only to realize it's one of the nuts that's supposed to hold my bar.
Imagine having to keep retightening screws in your edc gun constantly, that would drive me mad.
Those are narrow as shit no wonder. I've never had it on my Echo or Stihls, but then again it's hard to use a stihl when you're just pulling on it for half the day.
Yeah I use the fart boss or whatever the frick mid tier stihl on is named.
Loses a bar but every 2 fuel tanks worth of work.
I fricking hate the man portable large took category, chainsaws, wheedwhackers that kind of stuff. they are all a pain in the ass, doesn't matter gas or electric, chnesium or name brand, they all suck balls.
Change enough chains or even tighten enough and you will eventually loose a non captive nut. Or several over decades of near daily saw use.
Those are narrow as shit no wonder. I've never had it on my Echo or Stihls, but then again it's hard to use a stihl when you're just pulling on it for half the day.
>Got a 440 that is older than most people here, it's my daily workhorse. Clean your filters, replace them often, and check your carb after each filter replacement. Your fuel filter is probably gunked up, as is your air filter and the carb.
Also, switch to racing two stroke mix.
https://i.imgur.com/OdOtVaf.jpg
Yeah I use the fart boss or whatever the frick mid tier stihl on is named.
Loses a bar but every 2 fuel tanks worth of work.
I fricking hate the man portable large took category, chainsaws, wheedwhackers that kind of stuff. they are all a pain in the ass, doesn't matter gas or electric, chnesium or name brand, they all suck balls.
Nut up and buy pro grade shit. A MS 261 is probably too much power to weight for you, go with a 362.
Also, don't buy safety chain. If your dumb ass is using the tip of the saw? You have either fricked up, or have significant experience. Either way, safety chain is a piece of training gear that should be used up and replaced with regular or skip chain.
>Nut up and buy pro grade shit.
Dude, I cut 3-4 trees a year on average, im not dropping another $700 for a pro grade saw just because it poops out a nut once in a while.
No clue what safety chain is. I have picrel, it looks like every other chain I've ever seen.
thinnest double stack 17 round 9mm. I guess it's impressive if you're fat and still want to pretend you can fit into your pants?
I think this obsession with having the thinnest gun is a fad that will go away. I put fatter grips on my double stacks so I have more contact with my support hand and I still use ProGrip at matches.
Interesting. I actually prefer the gun be as thin as possible. I shoot for self defense no competition and part of legal self defense shooting requires your life to be just about over before you draw and shoot someone. Given that the law requires you play self defense like an ambush predator, I want maximum concealment.
I think this obsession with having the thinnest gun is a fad that will go away. I put fatter grips on my double stacks so I have more contact with my support hand and I still use ProGrip at matches.
meh, I like thinner and smaller grips. I can get if you don't want to deal with it but it is one of those things that are nice in the hand. I'll probably pick one up when someone sells thiers because they can't ride the lightning but I'm not really hyped about it.
Yeah there is a lower limit. A grip still has to conform to human-sized hands. It is however useful on a carry piece, where gripping comfort is not as high a priority.
You know I think they should take the magic pixie dust they used to shrink 9mm guns down (p365, hellcat, p15) and apply it to 10mm or 45acp guns. The result being 9mm sized guns in bigger calibers.
It’s their first striker fired I believe. It’s only 14oz as well. It also allows you to disable the magazine disconnect and the grip safety. Don’t know if you want to disable the grip safety, but frickin love that KelTec will let you.
Those cokehead mad scientists made a Glock 19 sized 9mm pistol that weighs 14oz. FOURTEEN. Glock 19 is 21oz, and a tiny subcompact like the hellcat is around 18oz. How did they do it bros? Can we get an 11 or 12 oz subcompact pistol from them in the future?
Imagine an 11oz p365/hellcat with ~15 rounds 30SC loaded with ultralight extreme cavitation bullets. I think I would jizz, boys.
And take the fricking palm web safety off. Holy frick what year is this? That's something every gun enthusiast complains about being on every gun that it's on.
Yea it is kinda a Reddit shit meme. But keltec is absolutely unique in many ways. Also built to be as cheap as possible, almost like they have a cocaine budget.
Their guy in the P15 interview seemed hungover/still drunk.
no guntubers are gays. I just make videos where I talk to the camera about guns, shoot them on camera, and upload them to YouTube.
It's surprisingly easy to shoot. I'm telling you this gun looks like absolute shit and I couldn't shoot a box without the rear sight drifting off but if you just mount a 407/507 this is legit.
It has an optic mount? I don't see any plate on the gun. Does it sit super high on the slide or what?
1 year ago
Anonymous
Sorry, I should have said "if you could just mount a 407/507." Phoneposting.
1 year ago
Anonymous
They said they plan to make a replacement rear section to be cut for various optic cuts. Is it made of polymer? It looks pretty cheap and I’m sure that’s why the sights walk easily.
1 year ago
Anonymous
Yes it is, and yeah it feels cheap.
1 year ago
Anonymous
>sights walk easily
This kills all enthusiasm I have for the gun. I'll wait a couple years for them to iron out the issues then get one I guess. Really disappointing.
to quote my local skinwalker, I wouldn't worry about it, I'll happen when it happens
I laughed audibly
Why would you want it? That legitimately looks like one of the worst handgun designs in history.
I get same feeling about it like when I'm cutting down a tree, spot something shiny in the sawdust only to realize it's one of the nuts that's supposed to hold my bar.
Imagine having to keep retightening screws in your edc gun constantly, that would drive me mad.
>bar nuts walking off
Bruh
It happens
Those are narrow as shit no wonder. I've never had it on my Echo or Stihls, but then again it's hard to use a stihl when you're just pulling on it for half the day.
Bruh again
They're both 8x1.25
Yeah I use the fart boss or whatever the frick mid tier stihl on is named.
Loses a bar but every 2 fuel tanks worth of work.
I fricking hate the man portable large took category, chainsaws, wheedwhackers that kind of stuff. they are all a pain in the ass, doesn't matter gas or electric, chnesium or name brand, they all suck balls.
Change enough chains or even tighten enough and you will eventually loose a non captive nut. Or several over decades of near daily saw use.
>Got a 440 that is older than most people here, it's my daily workhorse. Clean your filters, replace them often, and check your carb after each filter replacement. Your fuel filter is probably gunked up, as is your air filter and the carb.
Also, switch to racing two stroke mix.
Nut up and buy pro grade shit. A MS 261 is probably too much power to weight for you, go with a 362.
Also, don't buy safety chain. If your dumb ass is using the tip of the saw? You have either fricked up, or have significant experience. Either way, safety chain is a piece of training gear that should be used up and replaced with regular or skip chain.
>Nut up and buy pro grade shit.
Dude, I cut 3-4 trees a year on average, im not dropping another $700 for a pro grade saw just because it poops out a nut once in a while.
No clue what safety chain is. I have picrel, it looks like every other chain I've ever seen.
Be a man and use an axe.
god bless that man those guns are sexual
The metal ones kinda cool.
What you think you look like after 4 straight days of cocaine
What you actually look like after 4 straight days of cocaine.
What does this gun do that other guns don't? Kel Tec usually has a gimmick of some kind.
there's no gimmick this time, it's just a solid design built with traditional Floridean craftsmanship
Interesting. I actually prefer the gun be as thin as possible. I shoot for self defense no competition and part of legal self defense shooting requires your life to be just about over before you draw and shoot someone. Given that the law requires you play self defense like an ambush predator, I want maximum concealment.
thinnest double stack 17 round 9mm. I guess it's impressive if you're fat and still want to pretend you can fit into your pants?
derp, forgot the pic and misstated the capacity
I think this obsession with having the thinnest gun is a fad that will go away. I put fatter grips on my double stacks so I have more contact with my support hand and I still use ProGrip at matches.
meh, I like thinner and smaller grips. I can get if you don't want to deal with it but it is one of those things that are nice in the hand. I'll probably pick one up when someone sells thiers because they can't ride the lightning but I'm not really hyped about it.
Yeah there is a lower limit. A grip still has to conform to human-sized hands. It is however useful on a carry piece, where gripping comfort is not as high a priority.
You know I think they should take the magic pixie dust they used to shrink 9mm guns down (p365, hellcat, p15) and apply it to 10mm or 45acp guns. The result being 9mm sized guns in bigger calibers.
As more and more Americans stop chugging goyslop, their waists are becoming slimmer and they need slimmer guns.
You got that backwards chum. Slim guns are for fat people. Their fat rolls push out a normal sized gun and they can't just drape a t shirt over it.
You're trying too hard to shit on a good thing
It’s their first striker fired I believe. It’s only 14oz as well. It also allows you to disable the magazine disconnect and the grip safety. Don’t know if you want to disable the grip safety, but frickin love that KelTec will let you.
Does disabling the grip safety allow it to be removed, also does it maintain drop safety without it?
I’d imagine you can take the piece out or it retracts itself. Not sure that it keeps the drop safety. Not much info is out.
IF it was reliable I'd own one. The metal and wood look is a nice break from the endless sea of polymer shit everywhere.
Man, that actually looks nice
I really like this one, its like an engineer made a gun in his garage with access to cnc mills.
>15 rounds, 12 in flush fit
>14oz
>6.6 long, 5in high , <1in wide
Seems impossible.
why is kel tec so obsessed with screws?
It’s really fun to screw things together when you’re high as the Columbia Andes.
Didn't know the Andes passed through North America
This is the most offensive thing I've seen all day and there was a pedo on my altchan earlier
But that hard rough-n-ribbed grip is perfect for scratching your hemorrhoids
lain? webring? or another chan?
these will take old s&w 5906 mags right? if so im excited. if not i am indifferent.
Those cokehead mad scientists made a Glock 19 sized 9mm pistol that weighs 14oz. FOURTEEN. Glock 19 is 21oz, and a tiny subcompact like the hellcat is around 18oz. How did they do it bros? Can we get an 11 or 12 oz subcompact pistol from them in the future?
Imagine an 11oz p365/hellcat with ~15 rounds 30SC loaded with ultralight extreme cavitation bullets. I think I would jizz, boys.
Make it p365 size or smaller then I'll give a shit. Only fatties could conceal this.
And take the fricking palm web safety off. Holy frick what year is this? That's something every gun enthusiast complains about being on every gun that it's on.
You do have the option to remove it. It also has a magazine disconnect that’s optional.
It’s 5 oz’s lighter than a p365
shill
name one TRULY zany thing keltec has made. this lol "LOL GOGAINE XDD" meme is so god damn forced.
Yea it is kinda a Reddit shit meme. But keltec is absolutely unique in many ways. Also built to be as cheap as possible, almost like they have a cocaine budget.
Their guy in the P15 interview seemed hungover/still drunk.
what're you talking about OP, I have one
Crazy. Their site says shipping Q4 and other than shot show there’s been no info.
What do you think about it?
Trigger is excellent, sights keep walking. It’s very small for 15+1. Trying to crank a vid out for Tues if I can.
A vid? You a guntuber?
How’s the grip feel in your hand? Looking at it makes me dread wanting to hold it tbh. Grip too narrow, gets even slimmer towards the bottom.
no guntubers are gays. I just make videos where I talk to the camera about guns, shoot them on camera, and upload them to YouTube.
It's surprisingly easy to shoot. I'm telling you this gun looks like absolute shit and I couldn't shoot a box without the rear sight drifting off but if you just mount a 407/507 this is legit.
It has an optic mount? I don't see any plate on the gun. Does it sit super high on the slide or what?
Sorry, I should have said "if you could just mount a 407/507." Phoneposting.
They said they plan to make a replacement rear section to be cut for various optic cuts. Is it made of polymer? It looks pretty cheap and I’m sure that’s why the sights walk easily.
Yes it is, and yeah it feels cheap.
>sights walk easily
This kills all enthusiasm I have for the gun. I'll wait a couple years for them to iron out the issues then get one I guess. Really disappointing.
>mfw kel tecs drug induced mania make borderlands guns a reality
>another wonder nine
Who cares?
eyup