It's up

It's up

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 2 weeks ago
    Anonymous

    gz but not gonna watch

  2. 2 weeks ago
    Anonymous

    I wonder if they’ll become mass produced

    • 2 weeks ago
      Anonymous

      It took him 8 years to do a final prototype
      Going from that to mass production is an entirely different ballache

      • 2 weeks ago
        Anonymous

        It’s a stamped receiver and a bunch of CNC machined parts. Seems like a lot of the repeatable quality issues have been ironed out. Assuming they have a solid business plan, what do you think would be barriers to full commercialization?

        • 2 weeks ago
          Anonymous

          Bureaucracy.
          Both corporate and governmental.

        • 2 weeks ago
          Anonymous

          Their cnc supplier is a single small time shop. Not exactly the most scalable

          • 2 weeks ago
            Anonymous

            I’m not familiar with CNC manufacturing. Can the client go to the supplier with a data package of the part and say “make this” and expect to receive quality parts within the tolerances? And then farm out the demand over several shops if demand spikes?

            • 2 weeks ago
              Anonymous

              Theoretically but then qc becomes a problem

            • 2 weeks ago
              Anonymous

              cnc is like 3d printing, it's good for low scale production and prototyping but terrible for large scale production. if he actually tried to mass produce it with cnc instead of setting up an actual production line (which would cost millions and therefore will never happen) he would end up making 20 a year at a msrp of >50k

              • 2 weeks ago
                Anonymous

                How does serbu do it?

              • 2 weeks ago
                Anonymous

                Not even remotely true Black person. 3d printing takes hours to days to make a single part. A properly set up machining center can shit out hundreds of parts per day. How many AK-50s do you expect him to sell?

              • 2 weeks ago
                Anonymous

                You moron, everything that is machined today in any kind of numbers is done on CNC machines because they're fast as shit. Once you have a program dialed in, all you need is some guy who makes $2 over minimum wage to swap parts and press the start button.

              • 2 weeks ago
                Anonymous

                not true my man, there's no real mass production till you manage to make it from stamped parts.
                cnc/milling is 100x slower.

              • 2 weeks ago
                Anonymous

                There is very little amount of things that can only be stamped out in the manufacturing world

              • 2 weeks ago
                Anonymous

                We redesigned the swash plate on a fricking Military Helicopter most of you dipshits would jizz your pants to see in person, because machining it from solid steel was cheapter, faster, more accurate, stronger, and lighter part than stamping out a bunch of various metal pieces, and welding them together you dingdong.

              • 2 weeks ago
                Anonymous

                CNC is ideal for volume production.
                I work for a shop that makes bell housings for rear differentials, we take castings and turn them into machined parts that go onto cars.
                AR-15 lowers are made the exact same way as are uppers.

              • 2 weeks ago
                Anonymous

                Mass production with CNC is done today.
                An "actual production line" like the ones from the 1960s are not feasible today. You're already paying tens of thousands for quality machines and big bucks for qualified and skilled machinists.
                So nowadays instead of having 30 machines and 30 machinists lined up, they stick the parts in a jig inside a large CNC mill which will do the operations on a batch of receivers/trunnions/whatever and do the tool changes automatically for new operations. And there's one CNC operator per machine. This allows you to cut on floor space and labor by just having 3-4 large CNCs in the factory floor. For really specific stuff like AR-15 trunnions yeah it makes sense to have a dedicated broaching machine.
                The use of metal injection molding/sintering also takes out a lot of machining work from the equation.

              • 2 weeks ago
                Sieg heil

                >So nowadays instead of having 30 machines and 30 machinists lined up, they stick the parts in a jig inside a large CNC mill

                Nah we usually just use milling vises, Kurt vises, I’ll make fixtures for op2 and 3 or if I need to use an indexer or the 5 axis but I rarely if ever use a tombstone
                G52 exists for a reason

                >which will do the operations on a batch of receivers/trunnions/whatever and do the tool changes automatically for new operations.

                Kinda, I need to program in the tool paths, t1 mo6 calls tool 1 tool change

                >And there's one CNC operator per machine.

                Nah we have operators run and deburr 3-4 machines maybe more

                2 operators can run a whole floor all shift for less than McDonald’s wages

              • 2 weeks ago
                Anonymous

                do you know what an "actual production line" looks like for milled parts? it's a bunch of machinists with their own mills, each with a different jig for a different step in the process. CNC mills are much bigger which allow you to make dozens/hundreds of perfectly machined parts at a time

              • 2 weeks ago
                Anonymous

                CNC has replaced the old 'jig assembly line' system.
                Way easier to use one good CNC then a bunch of jigs.

              • 2 weeks ago
                Sieg heil

                Nah man, my job literally is programming CNC milling centers so that we can hire kids at $18 an hour to set them up, and then operate the machinery

                I write programs, and setup notes so that literal high school dropouts and the felons from the local work-release system can setup the Cnc machines

              • 2 weeks ago
                Anonymous

                Damn you guys under pay I was making 27 doing setups and some new part setups... But it was a wide range of machines mazak 2 spindle lathes horizontal mills ect

                Now I make 30 working at a claped out garage shop that has beat to shit hass machines and alpha lathes writing programs with a cracked Czech ezcam software

              • 2 weeks ago
                Anonymous

                Do you have to have a certification or anything for that? Apples to oranges but I make $25 WFH doing office work shit which is comfy AF but I've always been interested in learning CNC stuff.

                How much would it cost to have a one off made like a custom upper or something?

              • 2 weeks ago
                Anonymous

                >Do you have to have a certification or anything for that?
                how risk averse are you? Its safest to get your foot in the door with a tech school "degree" but practically speaking you just have to be able to do the job. I started out with only HS diploma as an operator and did well, they showed me how to do setups and I became go to setup guy. I learned CAM(the software is super easy-the machining knowledge is the hard part) and started programming machines. Got a job at a different shop and now I do a lot of prototype work on millturn and I'm only 5 years in. 9-10 hours goes by fast its like getting paid to do a hobby. If you are serious now is the time, the majority of machinists are 40+ so you can jump in pretty easy.
                >How much would it cost to have a one off made like a custom upper or something?
                A tacky ass billet upper or one made from a forging? Shop rate is average ~$135/hr so you're looking at probably a grand all said and done for only one. CNC is a lot of setup and short run time, one offs are not cost effective for anything other than a prototype. I have always wanted to send a couple forgings to a Japanese job shop and get it made there, would probably be $3000 but I bet It'd be beautiful.

              • 2 weeks ago
                Anonymous

                I have a 2 year AAS degree from a community college in Computer Integrated machining. The first year was 80 manual machines like Bridgeports and engine latches and surface grinding

                The second year was almost all Cnc

              • 2 weeks ago
                Sieg heil

                CNC machining is not a skill worth learning, just avoid it and work that office job. Girls will find you more interesting, your car won’t smell like machine coolant and your bedroom won’t have chips in it where you have to vacumn every weekend

                And you’ll live longer since coolant mist will make us all die early

                You don’t need school to do this trade, I was working in law, some Karen on a power trip started making complaints about me in the office (just didn’t like me for whatever reason) so I started eating lunch in my car away from the drama

                One day a guy knocked on my window asked me if I could move my car for the forklift

                Got to talking and he was installing a cnc mill

                After that I decided I wanted to learn the skill after seeing some of them running dropped everything and went out to go learn it, k started as a machine operator, load part push button watch it, pull part out use vernier calipers record measurement.

                A month later they moved me up because I could speak English fluently and the guys only spoke Spanish(and no longer wanted me there)

                I would also learn to run a manual lathe with whistles and hand signals and guys going “no no my friend you cutting it backwards, you put lathe forwards to cut”

                Then Hand signals on how to grind HSS tools, you know how like Mexican dudes do on a job site and chop the air and whistle as a signal to cut or remove material here

                Became the setup guy setting up parts and moving to the next job (because I could read English)

                Got a job at a fortune 100 production line because I was an American citizen

                Left to make a dollar more an hour and learned cam at the next place

                Machining isn’t a lifelong career and it isn’t a career that can sustain a middle class lifestyle. My parents are rather wealthy and have helped me a great deal in life, they just purchased a brand new car for me because I wouldn’t have been able to afford one on a machinist salary, they paid through my college

            • 2 weeks ago
              Sieg heil

              Yes, you walk into the office with your solidworks file, you talk to Katie about shop rate, material and quantity

              She gives you a bid

              If you accept the bid, I come in, I shake your hand, I take the print from you and I take your solid works file,

              I look at your part and decide how I want to manufacture it and hold it

              In my computer aided machining program I draw the stock, I choose my tooling, I call the metal supplier

              Once I write my program I go to the cnc mill and set up the job, I proof my job, and I give the part to the QC manager

              If the part measures good,

              I go get a machine operator, I give him my material show him how to load it.

              Once he’s done running the job, he saves the program forever so that if you call us again, the machine operator sets up the job again and runs more

              I only come in again if you want a brand new part that needs more programming

              • 2 weeks ago
                Anonymous

                So that's CNC world, you ever work with forgings, die-cast or stampings?

              • 2 weeks ago
                Sieg heil

                Nah I’m smaller scale, 99% of my work is custom parts for movies and tv

                Forgings and castings would be like mass mass production

                So how do you feel about extruded alloy receivers? Any merits besides being able to crank them out? Forged alloy just seems superior especially if you want to later modify the design post production.

                Personally I like forged lowers over billet lowers, due to grain but I’m not a gun smith or weapons engineer I just make the cuts the smart people tell me to. I’m still classified as unskilled labor.

                I thought Titans of CNC made the BCG/Handguard for him? They have a state of the art shop, they could make him however many parts he wanted, for a nice wad of cash.
                [...]
                >I’m expecting to see 12-15k once this goes into production.
                That's maybe $3,000 worth of parts- though with the gun tax maybe $10k is a reasonable estimate of price to the consoomer
                [...]
                Dunning Krueger, the post
                [...]
                Thats exactly how it works, you send 20 machine shops the solid model/prints (usually under NDA). They all bid a price, you choose which one(s) you like and send them the Purchase Order. They ship you your parts for the agreed price. This is also why people who say "military grade just means made by the lowest bidder!!!1!1" are morons who don't understand that is how everything is made. If shop A will make my parts to print for $100 a part and Shop B will make them to print for $90 a part I am choosing shop B

                Yeah but going to titans of cnc for production parts is like demanding Enzo Ferrari personally hand make your parts for the Toyota.

                America is full of $20-25/hr machine programmers/machinists who aren’t millionaires. Yeah we don’t have brand new 9-axis machines that start at several million without any parameters enabled but plenty of us can knock something out on a clapped out haas or a fricked ip mazak with live tooling that’s been fork lifted between 5-10 shops

                Damn you guys under pay I was making 27 doing setups and some new part setups... But it was a wide range of machines mazak 2 spindle lathes horizontal mills ect

                Now I make 30 working at a claped out garage shop that has beat to shit hass machines and alpha lathes writing programs with a cracked Czech ezcam software

                Oh yeah our in-house mechanical engineer doesn’t even make $30 an hour, this place is super small

                The owner arguing with the haas tech over pricing and parts is a common sight now lol

                My favorite machine right now has bad vector drive but a new vector drive is worth twice what the machine is worth so whenever the spindle seizes up I have to power cycle it for the operator 5-6 times a day and hopefully not scrap a part.

                One time it froze mid tool change, dropped the spinning tool and snapped a key cutter in half fricked the part and cut a huge gash in the Kurt vise

                The operator refused to run it after that so now I have to operate it for him lol

              • 2 weeks ago
                Anonymous

                >My favorite machine right now has bad vector drive but a new vector drive is worth twice what the machine is worth

                >machine could be losing $1,000s per day
                >owner refuses to fix it because he's afraid to spends a few thousand $
                sounds about right

          • 2 weeks ago
            Anonymous

            Better or worse than lugerman's .45 luger?

          • 2 weeks ago
            Anonymous

            I thought Titans of CNC made the BCG/Handguard for him? They have a state of the art shop, they could make him however many parts he wanted, for a nice wad of cash.

            If it’s only 10k that is extremely reasonable. I’m expecting to see 12-15k once this goes into production.

            >I’m expecting to see 12-15k once this goes into production.
            That's maybe $3,000 worth of parts- though with the gun tax maybe $10k is a reasonable estimate of price to the consoomer

            cnc is like 3d printing, it's good for low scale production and prototyping but terrible for large scale production. if he actually tried to mass produce it with cnc instead of setting up an actual production line (which would cost millions and therefore will never happen) he would end up making 20 a year at a msrp of >50k

            Dunning Krueger, the post

            I’m not familiar with CNC manufacturing. Can the client go to the supplier with a data package of the part and say “make this” and expect to receive quality parts within the tolerances? And then farm out the demand over several shops if demand spikes?

            Thats exactly how it works, you send 20 machine shops the solid model/prints (usually under NDA). They all bid a price, you choose which one(s) you like and send them the Purchase Order. They ship you your parts for the agreed price. This is also why people who say "military grade just means made by the lowest bidder!!!1!1" are morons who don't understand that is how everything is made. If shop A will make my parts to print for $100 a part and Shop B will make them to print for $90 a part I am choosing shop B

            • 2 weeks ago
              Anonymous

              >maybe $10k is a reasonable estimate of price to the consoomer
              Doubt it will ever go to the public. I can see Demo Ranch and Garand Thumb getting their hands on one (maybe just the prototype) so it can make its guntuber content rounds, but I kind of doubt he'll actually produce that many or want to deal with the ballache that is warrantying a brand new design.

              • 2 weeks ago
                Anonymous

                Agreed. Also with our horrible lawsuit culture I'm sure they are also considering the liability that selling a semi auto .50BMG could bring. One moron pulls a Kentucky Ballistics and he gets sued into the ground

              • 2 weeks ago
                Anonymous

                He stopped selling normal AK builds to the public too, only does it for friends. Also, since it has an ak fcg he's probably going to make it full auto.

              • 2 weeks ago
                Anonymous

                Did they mill the sear trip on the BCG? I thought it was cool a normal AK FCG could reliably ignite 50 primers, though I guess it was designed for Russian x39 hard primers so not that crazy. The AK50 seemed to cycle pretty slow to me. I also am curious what kind of accuracy its capable of, having a static barrel.

              • 2 weeks ago
                Anonymous

                I think so, in the video where he showed the parts from titans of cnc I think he pointed it out. I've had to go back and look though. I'm definitely interested in a Garand Thumb style video pushing it to distance, seeing how it holds up when accessorizing, etc. Thing looks heavy as shit though, way more than a Barrett.

              • 2 weeks ago
                Anonymous

                >Thing looks heavy as shit though
                Yeah that fricker looks like its 18lbs+. hopefully it can at least hold 1MOA, would be cool to see it shoot handloads with those crazy >1.0 BC bullets out to 1000+. That dust cover mount doesn't look super rigid though, they should have just done a side rail.

              • 2 weeks ago
                Anonymous

                18 lbs would be light for a semi-auto .50 BMG.

              • 2 weeks ago
                Anonymous

                >Also, since it has an ak fcg he's probably going to make it full auto.
                *definitely
                imagine being a guntuber with an SOT and not machine gunning all the things, especially this

            • 2 weeks ago
              Anonymous

              >If shop A will make my parts to print for $100 a part and Shop B will make them to print for $90 a part I am choosing shop B
              Depends
              Quality standard needs to be met
              Military grade means minimum quality that military accepts
              If they can get twice the quality for dollar higher they might go for that

            • 2 weeks ago
              Anonymous

              This is the son of a b***h sending out 20 RFQs. I'll no quote your ass and put you on my shitlist

              • 2 weeks ago
                Anonymous

                To make things worse, corporate procedure may dictate "bUt we haVe tO get mUlTiplE qUotEs."

          • 2 weeks ago
            Anonymous

            A small shop can still crank out thousands of parts it's all about fixturing and up time you can run a CNC 24/7 you'll crank out 300% more parts

            cnc is like 3d printing, it's good for low scale production and prototyping but terrible for large scale production. if he actually tried to mass produce it with cnc instead of setting up an actual production line (which would cost millions and therefore will never happen) he would end up making 20 a year at a msrp of >50k

            Completely untrue almost anything mechanical is mass produced on a CNC

        • 2 weeks ago
          Anonymous

          >Assuming they have a solid business plan
          We can't assume that because they don't. This whole thing has been to draw out views over as long a period as possible. The only reason Brandon isn't bankrupt is because he's getting money from leviathan.

          • 2 weeks ago
            Anonymous

            Social engineering

        • 2 weeks ago
          Anonymous

          Cost, 10k isn't something most people can drop on a whim and the ones who can have a multitude of proven options to choose from like Barrett.

          • 2 weeks ago
            Anonymous

            If it’s only 10k that is extremely reasonable. I’m expecting to see 12-15k once this goes into production.

            • 2 weeks ago
              Anonymous

              That's a moronic price and this will never enter production. The zoom zooms watching his videos don't have money.

        • 2 weeks ago
          Anonymous

          Cost.
          That fluted barrel would be a absolute pain to mass produce. Nevermind the rest of the parts.
          Don't get me wrong, if I had $25,000 sitting around, I'd be willing to buy one.
          It's probably more accurate than the Barret due to using a Kalashnikov action instead of a Bofors action.
          But, how many people do you think have $25,000 sitting around for a slightly more consistent .50cal rifle?

          • 2 weeks ago
            Anonymous

            >how many people do you think have $25,000 sitting around for a slightly more consistent .50cal rifle?
            The average .50 BMG enthusiast who wants a semi-auto instead of a bolt gun.

          • 2 weeks ago
            Anonymous

            If I had $25,000 sitting around, whispering spend me, I'd start looking at NTW-20's or something.

    • 2 weeks ago
      Anonymous

      They only built it becoz it was fun he didn't had any knowledge about how difficult It is to product .50 cal ak.even in video he said when firing the gun"very fricking impractical but fun to shoot"

  3. 2 weeks ago
    Anonymous

    Sorry I don't watch filtered ecelebs

  4. 2 weeks ago
    Anonymous

    >54k views
    >22min
    Either this guy has an army of bots or all of his subscribers are literal kids on summer break who just sit around on YT all day

    • 2 weeks ago
      Anonymous

      I'm on my lunch break and I watched it

      • 2 weeks ago
        Anonymous

        >watching ecelebs
        Embarrassing

        • 2 weeks ago
          Anonymous

          Not him but honestly I just wanted some fricking closure. Anyways I hope he wins his race.

        • 2 weeks ago
          Anonymous

          >using a Chinese cartoon forum to project insecurities.
          baba booey

    • 2 weeks ago
      Anonymous

      >literal kids on summer break
      It’s fricking may moron

      • 2 weeks ago
        Anonymous

        Not a child so i have no idea

        If you're subscribed you get notified. Plus he's running for Congress on a 2A platform so he's had lots of visibility. We could, in our lifetime, see him trolling AOC live on tv.

        Good, good, you're falling for it

        • 2 weeks ago
          Anonymous

          >We could, in our lifetime, see him trolling AOC live on tv.
          It's more likely we'll see him pull a "Israel is our biggest ally" "you don't need weapons of war"

          Sorry I don't watch filtered ecelebs

          Neat! I bet the the nice israeli fella in your picture will give me a good deal on the price.

          SAAAAAAAAAAAR

      • 2 weeks ago
        Anonymous

        School gets out in May, you absolute fricking brainlet.

      • 2 weeks ago
        Anonymous

        Schools out moron

        • 2 weeks ago
          Anonymous

          i didn't finish college because of the vaccine

    • 2 weeks ago
      Anonymous

      If you're subscribed you get notified. Plus he's running for Congress on a 2A platform so he's had lots of visibility. We could, in our lifetime, see him trolling AOC live on tv.

      • 2 weeks ago
        Anonymous

        >We could, in our lifetime, see him trolling AOC live on tv.
        It's more likely we'll see him pull a "Israel is our biggest ally" "you don't need weapons of war"

        • 2 weeks ago
          Anonymous

          I am Johann Smithovich from Iowa Oblast, and I am now of demoralized.

        • 2 weeks ago
          Anonymous

          Neat! I bet the the nice israeli fella in your picture will give me a good deal on the price.

          Do a revolution and/or do the funny thing against a real target instead of crying about democracy and how it doesn't work you homosexuals

        • 2 weeks ago
          Anonymous

          He's unironically been buddying up with the likes of MTG.

          • 2 weeks ago
            Anonymous

            https://www.instagram.com/p/C4tEaIxr-4q/?igsh=MXRhcmNnM2ptN2c5NQ==

            • 2 weeks ago
              Anonymous

              oy vey, shut it down

          • 2 weeks ago
            Anonymous

            Cause what congress needs is more agitprop 5th columnist schizoids

        • 2 weeks ago
          Anonymous

          >pull a "Israel is our biggest ally"
          Likely.
          >"you don't need weapons of war"
          Unlikely. They need to keep that chip on the table or else they lose a lot of singlebissue voters. They have been throwing a lot more bones in that direction the last couple years.

          • 2 weeks ago
            Anonymous

            I agree. All the gay guntubers are in the same batch of shitty alt-right or adjacent politics, the only thing they don't typically budge on is gun politics.

            • 2 weeks ago
              Anonymous

              Excuse me, you should consider returning to Reddit dot com “r” slash guns

        • 2 weeks ago
          Anonymous

          Not unlikely.
          Congress poisons people.

        • 2 weeks ago
          Anonymous

          Yeah I'm sure any day now that second one will happen you fricking clown. Also killing Muslims is the one good thing israelites do, it's very organic that NOW you homosexuals care about le israeli question.

          • 2 weeks ago
            Anonymous

            >le
            go back

            • 2 weeks ago
              Anonymous

              I'm calling you a redditor, homosexual.

          • 2 weeks ago
            Anonymous

            There's no wrong time to be antisemitic

          • 2 weeks ago
            Anonymous

            touched a sore spot?

          • 2 weeks ago
            Anonymous

            Easily in the top 25 worst shill posts I’ve seen on this website in nearly a decade.

        • 2 weeks ago
          Anonymous

          Yup. Would be funny to see him get torn apart online though, after playing up the fricking big fricking tough mother fricking guy - who immediately goes to tongue Israel’s ass. Does Herrera really even sell AKs? Or does he just have a YouTube channel where he talks about building them?

          • 2 weeks ago
            Sieg heil

            I feel that brandon Herrera’s political inexperience will instantly show, he’ll be like Dan Crenshaw. Favored for a bit, but then led by the GOP leaders to be the fall guy… he will probably find Israel, ukraine, bailout corporations and cut taxes for the wealthy while raising taxes on the working class

            And not even know he’s doing it just because he was being a good goyim and following Mitch to the tee

            And they’ll use him to pin all the unpopular uniparty shit because he’s too dumb to know any better since his life up until this point was pointing an iPhone at a can of white claw, shooting it with an AK and going “whoaaaa did u see dat?”

            Basically a “we have fps Russia in 2024” for gen alpha and zoomers

            • 2 weeks ago
              Anonymous

              Nah he's just going to find out that a single congressman has very little power in the grand scheme of things without support of the rest of the party.

              This is what all those moronic socialist democrats found out, turns out most of the democrats in the party are not actually that interested in your dumb frick commie ideas and all you can do now is to virtual signal by voting against your own party.

              • 2 weeks ago
                Anonymous

                Don't overlook the possibility of based and gunpilled bants on the floor, schooling stupid libtards.

              • 2 weeks ago
                Anonymous

                I know you're being facetious, but if the government doesn't want us to elect clowns, they should stop acting like a circus.

      • 2 weeks ago
        Anonymous

        > le epic libtard owned
        (20,000 immigrants entered during the press conference, an law banning anti semitism passed, israel received a new payment of 600,000 gorillion dollars, and another state banned assault weapons)

        We won anons

        • 2 weeks ago
          Anonymous

          Societies exist to restrict individual liberty and, thereby, hurt you. Governments that benefit themselves at the expense of their constituents to the absolute limit of what those constituents will tolerate are working as intended.

    • 2 weeks ago
      Anonymous

      >he says wasting his time on this shithole
      people got time to waste

    • 2 weeks ago
      Anonymous

      what's a timezone?

    • 2 weeks ago
      Anonymous

      >all of his subscribers are literal kids
      this is news to you?
      total guntuber death.

      • 2 weeks ago
        Anonymous

        >people getting the next generation into guns should be PUT TO DEATH for being cringe sometimes
        yeah ok Black person

  5. 2 weeks ago
    Anonymous

    Neat! I bet the the nice israeli fella in your picture will give me a good deal on the price.

    • 2 weeks ago
      Anonymous

      >you wake up
      >you think of israelites

    • 2 weeks ago
      Anonymous

      Herrera is israeli?

  6. 2 weeks ago
    Anonymous

    But will this be the edge he needs to win the primary

  7. 2 weeks ago
    Anonymous

    cool idea, although I wonder what numbers it can do now that it's done. Pretty sure the effective range figure out online is BS (3000 yd like wtf)

  8. 2 weeks ago
    Anonymous

    Don't care, buy an ad, israeli funded politician.

    • 2 weeks ago
      Anonymous

      >Remember to vote Democrat and turn in your guns fellow kids!

      • 2 weeks ago
        Anonymous

        lmao
        I wish we had a chud patrol clocking trannies

        • 2 weeks ago
          Anonymous

          >his kids aren't a part of his school's CHUD patrol

          • 2 weeks ago
            Anonymous

            my kid's not cool enough to be on the chud patrol
            they are all chads fricking cheerleaders
            my son's but a chudjak...

    • 2 weeks ago
      Anonymous

      How much is Tony paying you, champ?

  9. 2 weeks ago
    Anonymous

    I see you you gay

    • 2 weeks ago
      Anonymous

      Is that fricking Meat Canyon?

      • 2 weeks ago
        Anonymous

        yes

      • 2 weeks ago
        Anonymous

        He bullied some industry artist into killing himself recently.

        • 2 weeks ago
          Anonymous

          Good.

        • 2 weeks ago
          Anonymous

          I kneel

        • 2 weeks ago
          Anonymous

          qrd?

  10. 2 weeks ago
    Anonymous

    Very based. Idk why bitter homosexuals are crying and hating le popular thing

    • 2 weeks ago
      Anonymous

      because they don't realize being an edgy contrarian isn't a replacement for a lack of personality

    • 2 weeks ago
      Anonymous

      Because an outspoken 2A absolutist Republican is the last thing the shills here want. If we start getting our guys into power and completely replace the establishment/uniparty Rs left in office with them, the uniparty loses.

      • 2 weeks ago
        Anonymous

        This. They want more Dan Crenshaws they can point at and say "just as bad, don't bother voting". It's all so tiresome.

  11. 2 weeks ago
    Anonymous

    i hate this commie sucking beaner with all my heart.

    • 2 weeks ago
      Anonymous

      >Commie sucking
      Proof, or is this like when you gays said Ian was a commie

      • 2 weeks ago
        Anonymous

        There is none, he had an entire video about not simping for commies and why Garrett Foster deserved to get shot the way he did.

    • 2 weeks ago
      Anonymous
  12. 2 weeks ago
    Anonymous

    >C-COMMIE
    >H-HE’S GONNA KEK, GUYS!
    >S-SHILL!

    Holy seething. He must be doing shit right if thats the case

    • 2 weeks ago
      Anonymous

      This is basically the reaction to anyone PrepHole liked that then became popular

    • 2 weeks ago
      Anonymous

      I hate contrarianism so much.

      • 2 weeks ago
        Anonymous

        Then why are you here?

  13. 2 weeks ago
    Anonymous

    Neverserved brovets like this guy and the homosexual who runs Q are the cringiest motherfrickers in existence.

    • 2 weeks ago
      Anonymous

      >Neverserved brovets
      >Neverserved
      >brovets
      Black person what

    • 2 weeks ago
      Anonymous

      Seethe harder. He never pretended to be military.

    • 2 weeks ago
      Anonymous

      >didnt become goycattle to die in useless war
      why is this bad?

    • 2 weeks ago
      Anonymous

      Seething zogbot detected

    • 2 weeks ago
      Anonymous

      The guy was nearly born 1996, he probably graduated high school near 2013 or so, what fricking war would he have been part of by then?

      • 2 weeks ago
        Anonymous

        Wait, he not like 35?? Jesus he's had a rough few years.

        • 2 weeks ago
          Anonymous

          He had to have been a party animal or something. I'm slightly older by being born in 94 and imo, I look 4 years younger at a minimum than he does. I'd look younger if I didn't look sad as frick from the typical depression most guys our age feel.

          • 2 weeks ago
            Anonymous

            He’s also Hispanic, who reach middle age at 21

    • 2 weeks ago
      Anonymous

      NEVERseRVeDDDdd!!!
      Such dicks welfare queen. 80% of the military are non combat roles. Most of you are do nothing malingerer losers gross and immature that don't know how to do anything then know how to do even less when you're not backed by an entire team and the bottomless wallet of the military industrial complex. Blah blah fricking blah frick you forever loser. Keep praying someone does push-ups for your peoples self deletes and pray they do t set off fireworks on any holidays soon muh ptsd queen. Fricking uppity ass "e4 mafia" losers,

    • 2 weeks ago
      Anonymous

      >he considers serving ZOG as a badge of honor
      Kek b***hmade

    • 2 weeks ago
      Anonymous

      Imagine actually serving.
      Lol, stick to being a welfare mooch, jarhead.

  14. 2 weeks ago
    Anonymous

    So what's the market for this? What niche does it fill as a 50 BMG rifle that a Barrett doesn't? Is it cheaper?

    • 2 weeks ago
      Anonymous

      >So what's the market for this?
      People who watch a gun tuber and like things that go boom

    • 2 weeks ago
      Anonymous

      its fun.

    • 2 weeks ago
      Anonymous

      I don't think its intended to be sold though the process of building it was certainly used for content. Wasn't it just a passion project the dude started for fun?

    • 2 weeks ago
      Anonymous

      The long-lost art of doing shit for the lulz
      You wouldn't understand

    • 2 weeks ago
      Anonymous

      its a novelty .50 cal
      thats its niche

    • 2 weeks ago
      Anonymous

      I don't believe a Barrett costs anymore to make than the AK50 does and while it's less accurate with a short-recoil operation, it's also proven and established. It's a neat project but it's like trying to develop fricking Betamaxx or some alternative to a VHS except doing it like 40 years later.

      • 2 weeks ago
        Anonymous

        >while it's less accurate with a short-recoil operation
        Wut? The bullet has already left the barrel before any movement of the recoil or cycling system starts.

        • 2 weeks ago
          Anonymous

          NTA, on a bolt action the rifle begins moving rearward before the bullet has left the barrel, I'd imagine it's similar for a short recoil. Even then the accuracy issues come from the barrel never returning to exactly the same point

          • 2 weeks ago
            Anonymous

            >NTA, on a bolt action the rifle begins moving rearward before the bullet has left the barrel, I'd imagine it's similar for a short recoil. Even then the accuracy issues come from the barrel never returning to exactly the same point
            The force of the bullet is transferred in equal and opposite amount to the rifle. But that is true for all firearms. Why does the short recoil mechanism that is powered by the built of of pressure of some of the gas from the barrel acting on a piston after the bullet leaves the barrel do anything to the accuracy?

            Also what do you mean the barrel never returns to the same point? Yeah the rifle being held will move around because it's a lot of force and a human isn't a clamp able to hold it without any movement.

          • 2 weeks ago
            Anonymous

            >NTA, on a bolt action the rifle begins moving rearward before the bullet has left the barrel, I'd imagine it's similar for a short recoil
            Did you just describe recoil? Because what you described sounds awfully similar to recoil. Are you under the impression that gas operated rifles only experience recoil after the bullet leaves the barrel? Are you also under the impression that bolt actions are somehow less accurate than gas operated semiautos?
            >Even then the accuracy issues come from the barrel never returning to exactly the same point
            ???

            • 2 weeks ago
              Anonymous

              >Did you just describe recoil? Because what you described sounds awfully similar to recoil.
              Duh, you see where i said "the rifle begins moving rearward before the bullet has left the barrel"
              >Are you under the impression that gas operated rifles only experience recoil after the bullet leaves the barrel?
              Where did I say or imply that?
              >Are you also under the impression that bolt actions are somehow less accurate than gas operated semiautos?
              If anything I am saying the complete opposite...You write rhetorical questions like a psychopath
              >Also what do you mean the barrel never returns to the same point?

              >???
              Are you guys pretending to be moronic? Anon is saying Barrett is less accurate bc short recoil, I reply saying that because of the barrel moving in a bushing/bearing/journal whatever Barrett calls it- it will not return to the same exact place every time. There has to be clearance in the journal for the barrel to move otherwise it is size on size. 0.005" of barrel deflection is 1" at 100 yards, so even a couple tenths clearance will mean the barrel isnt pointing at exactly the same spot. This is pretty undisputed as why the Barrett is an antimaterial rifle not a "sniper rifle" https://www.youtube.com/watch?v=F6-c--kIZlI You both read my post with logical dishonesty maxed out apparently

              >If shop A will make my parts to print for $100 a part and Shop B will make them to print for $90 a part I am choosing shop B
              Depends
              Quality standard needs to be met
              Military grade means minimum quality that military accepts
              If they can get twice the quality for dollar higher they might go for that

              >make my parts to print
              >Quality standard needs to be met
              You mean the quality standards on the print? "To print" means it meets all quality standards...otherwise it is not to print. US Military specifies everything in autistic detail, If it is to their print it will function.
              >If they can get twice the quality for dollar higher
              lol that's not how it works, to print is to print

              Can't you do clear anodizing?

              Kinda, personally I only like to do type3 anodizing because it’s much much more durable

              Any decent plater can Type3 hard clear anodize, they just don't add the black dye. It isn't "clear" its sort of greenish it's kind of ugly. But yes Hard Ano is the only way to go, Type2 just scratches off it's useless

    • 2 weeks ago
      Anonymous

      The military will never want it. It will be marketed first for AK-fans who want to mag-dump trash with a cool "compact" 50 BMG. I do wonder what the muzzle velocity of this thing will be compared to the Barrett. The AK-50 seems way more controllable than a Barrett for some reason

      • 2 weeks ago
        Anonymous

        It won’t be marketed because it is not and never was intended to be sold. Because he made it just because he thought it would be cool.

        There might possibly be a handful sold on a custom commission type of deal, but it certainly won’t make it to the mass production stage.

    • 2 weeks ago
      Anonymous

      Serbu already has the "semi auto .50, but half the price of a Barrett" market locked down with the BFG-50.

    • 2 weeks ago
      Anonymous

      "Because it's there"

  15. 2 weeks ago
    Anonymous

    >made possible by autism
    That intro was 11/10

  16. 2 weeks ago
    Anonymous

    >Ballistic High Speed
    Nice! But is the barrel supposed to wobble so phallically?

    • 2 weeks ago
      Anonymous

      Most guns do that

    • 2 weeks ago
      Anonymous

      AK's in particular really do that.

  17. 2 weeks ago
    Anonymous

    It doesn't even look a fricking AK. All this work for a scuffed mexican m107

    • 2 weeks ago
      Anonymous

      My one request is that he keeps the handguard chrome-colored in the final production because it looks really badass

      Also that barrel and receiver whip, jesus. It still has a way to go. I wonder if there is even a buffer system in the rear or if it is just a pure metal shell back there

      It is the lack of curved mag. .50 is not a heavily tapered cartridge like 7.62x39, anon. And he already said it won't look exactly like an AK because of physics. Not even the RPK looks identical to the AK

      • 2 weeks ago
        Anonymous

        >buffer system
        >AK
        What would you be referring to?

        • 2 weeks ago
          Anonymous

          The one that would exist on a .50 BMG AK to dampen the recoil

          • 2 weeks ago
            Anonymous

            Presumably it's just using a really big spring like an AK.

            • 2 weeks ago
              Anonymous

              The stock pad might be rubber but that's about it. I was just wondering why the stock is so long because it really seems like the spring doesn't use the full length of it. I am confused

              https://i.imgur.com/SHDjF1q.png

              [...]
              Oh, Or maybe there is something

              Huh. Well that's interesting.

              • 2 weeks ago
                Anonymous

                This looks to be the final version as it has the nicely machined handguard

          • 2 weeks ago
            Anonymous

            Presumably it's just using a really big spring like an AK.

            Oh, Or maybe there is something

            • 2 weeks ago
              Anonymous

              Earlier AK-50 video showed him spitballing about using a small die spring to buttress the recoil spring. Looks like he went with that.

      • 2 weeks ago
        Anonymous

        Wait, so...
        >no wooden furniture
        >no AK-like stock
        >no curved mag
        >not even the muzzle device that looks like AK
        WHAT was the point of this abomination?

      • 2 weeks ago
        Anonymous

        Wait, so...
        >no wooden furniture
        >no AK-like stock
        >no curved mag
        >not even the muzzle device that looks like AK
        WHAT was the point of this abomination?

        Brandon Herara is a moron larping as a gunsmith, the reason why he called it an AK-50 is because he actually thinks Kalashnikov invented piston guns.

        • 2 weeks ago
          Anonymous

          it's called an AK-50 because it's a .50 BMG automatic rifle that copies Mikhail's homework whenever possible

          • 2 weeks ago
            Anonymous

            >Whenever possible
            So, it's a piston gun that has literally zero similarities with any model of AK? Got it.

            • 2 weeks ago
              Anonymous

              >literally zero similarities with any model of AK
              That's not even true if you meant "parts compatibility" instead of what the word "similarities" means.

              • 2 weeks ago
                Anonymous

                Enumerate the similarities.

              • 2 weeks ago
                Anonymous

                ...Virtually everything about it? The entire gas system is scaled-up AK stuff, the hinged recoil guide rod is coped from the PKM, the pistol grip and FCG are literal AK parts, the receiver was originally milled but was redesigned to be stamped to simplify production and reduce costs—and is held together with rivets either way...it's very explicitly designed to be as Kalashnikov-"inspired" as possible, whenever possible, given the necessities of mag-feeding .50 BMG

              • 2 weeks ago
                Anonymous

                So the gas system, yeah, got it. And the pistol grip.
                Wow.
                Powerful.

              • 2 weeks ago
                Anonymous

                And the receiver, and the dust cover, and the BCG, and...
                Please stop. This is like arguing that an SR25 has nothing in common with an M16 because it's bigger and has rails and an adjustable stock.

              • 2 weeks ago
                Anonymous

                Why are you a moron Black person

                >Try to design something to be like something else
                >Change every single dimension
                >Only similarities are visual
                I get it, you guys are fanboys, but when you have to re-engineer every singular atom of a design because there is literally nothing you can apply from the old design, it's hard to call it anything other than a completely new design.

              • 2 weeks ago
                Anonymous

                I believe it still uses the AKM fcg and pistol grip. It's still long stroke piston, it has the same bolt, carrier, ejector design. I agree that its strayed pretty far from the AKM but that's out of necessity. Not trying to dickride the guy but you really can't say it's not at least "Kalashnikov inspired" in almost every aspect. Remember that Mikhail designed the PKM too so there's a lot of design cues to pull from.

              • 2 weeks ago
                Anonymous

                >it works exactly the same as the AK
                >it's mostly just bigger in all the dimensions necessary for it to cycle .50 BMG
                I'm sorry that the cam track path on the bolt carrier isn't dimensionally identical to the one on the AK's; that must be so disappointing for you.

              • 2 weeks ago
                Anonymous

                >heck yeah… LETS GO BRANDON!
                AK-50 done!

                And the receiver, and the dust cover, and the BCG, and...
                Please stop. This is like arguing that an SR25 has nothing in common with an M16 because it's bigger and has rails and an adjustable stock.

                In a sense the PTRS-41 is just a scaled up SKS from 7.62x39 14.5×114.

              • 2 weeks ago
                Anonymous

                Other way around. The SKS is a scaled down PTRS.

              • 2 weeks ago
                Anonymous

                >In a sense the PTRS-41 is just a scaled up SKS from 7.62x39 14.5×114.
                Funny you say that, because the SKS is literally a scaled down PTRS-41.

              • 2 weeks ago
                Anonymous

                >In a sense the PTRS-41 is just a scaled [...]SKS
                >he doesn't know

              • 2 weeks ago
                Anonymous

                Other way around. The SKS is a scaled down PTRS.

                Correct the PTRS-41 came first and the SKS came after

              • 2 weeks ago
                Anonymous

                https://i.imgur.com/lX3eam3.jpeg

                [...]
                Correct the PTRS-41 came first and the SKS came after

                I do know I’m just doing a little trolling;)

              • 2 weeks ago
                Anonymous

                >merely pretending

              • 2 weeks ago
                Anonymous

                Pretending only I was

              • 2 weeks ago
                Anonymous

                Was only I pretending?

              • 2 weeks ago
                Anonymous

                I'm Alpharius.

              • 2 weeks ago
                Anonymous

                Was only I pretending?

                I'm Alpharius.

                Do. Or do not. There is no try.

            • 2 weeks ago
              Anonymous

              Long-stroke, very similar bolt, same ejector and extractor, same dust cover, same general gas block design
              >BUT ITS NOT WOOOOD!1!1!
              Wait until you hear what the AK-74M buttstock is made of

              Is it supposed to not have a safety lever?

              True it does need the safety lever ASAP. You can't have an AK without the most iconic part imo. The AK-50 isn't finished yet. I trust the plan

            • 2 weeks ago
              Anonymous

              Why are you a moron Black person

      • 2 weeks ago
        Sieg heil

        It’s just raw aluminum you don’t want a raw aluminum hand guard without the heat treated candy coated shell or anodizing… aluminum particularly extruded aluminum bar stock has the consistency of frozen butter

        I can take a knife and put several dings in it

        In fact I’ve scrapped several parts in the past because there were stray chips on the table and I set a freshly machined part on it

        • 2 weeks ago
          Anonymous

          Can't you do clear anodizing?

          • 2 weeks ago
            Sieg heil

            Kinda, personally I only like to do type3 anodizing because it’s much much more durable

        • 2 weeks ago
          Anonymous

          So how do you feel about extruded alloy receivers? Any merits besides being able to crank them out? Forged alloy just seems superior especially if you want to later modify the design post production.

        • 2 weeks ago
          Anonymous

          >It’s just raw aluminum you don’t want a raw aluminum hand guard without the heat treated candy coated shell or anodizing… aluminum particularly extruded aluminum bar stock has the consistency of frozen butter
          True, but I never said he should leave the handguard as raw aluminum, just retain the chrome-like color in the final product. It looks cool, like how an AK-47 has dark gunmetal for the receiver contrasting against bright wood for the handguard. He should keep those aesthetics the same. Plus I have fatigue from all dark-black weapons.

          Lmao is he actually pro-Russian?

          He's not, according to GT's drone hunting video. He just seethes about the ammo ban occasionally

  18. 2 weeks ago
    Anonymous

    Come on now you Mexican bastard, I know you're here
    Show yourself

  19. 2 weeks ago
    Anonymous

    that dude is a gay

  20. 2 weeks ago
    Anonymous

    I remember back when he was still called the akguy, he did a stream with someone when he was just starting the AK-50 project and they took viewer questions and someone asked him "why would anyone buy this over a Barrett?" and his only retort was "YOU CAN'T AFFORD IT ANYWAYS!!" kek

  21. 2 weeks ago
    Anonymous

    Neat.
    I won't watch it because I don't like hai style of videos but neat nonetheless. Making a gun just for the hell of it is a great endeavor.

  22. 2 weeks ago
    Anonymous

    There was Ronnie barret and Brandon Herrera. Arrete

  23. 2 weeks ago
    Anonymous

    Did anyone else notice the wild ejection patterns? Wouldn't that be a cause for concern as to its reliability?

    • 2 weeks ago
      Anonymous

      Could that just be ammo related? .50BMG, iirc, was never loaded to consistent precision. It's probably highly variable on powder charges, since the idea is to send a fat slug or HE or something down range.

      • 2 weeks ago
        Anonymous

        He mentioned in the video that it was testing ammunition and thanked a company for supplying it to them, saying that '50BMG test ammo isn't cheap.'

        • 2 weeks ago
          Anonymous

          What does "testing ammunition" mean in this context? Lower grade, because you don't really need to be hitting anything, or deliberately inconsistent to test "edge cases"?

    • 2 weeks ago
      Anonymous

      Yes I noticed, especially on that first mag he shot. One of the cases literally just plopped on the table not even a foot away. Some looked like it could have been the case hitting the charging handle and deflecting weird, but a few were very suspect.

    • 2 weeks ago
      Anonymous

      Thats just the way the ejector works. Plunger type ejectors you find in ARs, bolt guns etc have a very consistent ejection pattern. AKs, most pistols, and many other guns just have a bit of metal the case rams into and fly out in all sorts of ways. He probably kept that style of ejector to be faithful to the AKishness of the thing
      Check this vid https://youtu.be/oPxPce_BCzc every third round only goes in the same general direction. Its not really a problem.

      • 2 weeks ago
        Anonymous

        Well with that in mind, I wouldn't actually have a problem with this thing being on the market, just too bad he's too late to the party. There's a handful of semi-auto fiddy cals out there these days.

  24. 2 weeks ago
    Anonymous

    Truely cringe video.
    Cool project though.

  25. 2 weeks ago
    Anonymous

    Retired VMC gay here. Major props to Titans for getting the project done right.

    • 2 weeks ago
      Anonymous

      I know nothing about CNC but I did enjoy the videos where the guys from Titans showed how everything was done and how they make the parts.

  26. 2 weeks ago
    Anonymous

    ugh

  27. 2 weeks ago
    Anonymous

    Why are we arguing about how to mass produce something that will sell 5-10 units in total over it's lifetime? Also he'll think whatever his superiors tell him to think or he'll lose """""funding"""""

    • 2 weeks ago
      Anonymous

      His.. superiors..?

      • 2 weeks ago
        Anonymous

        I think that's a bot you just replied to.

  28. 2 weeks ago
    Anonymous

    Yes that's exactly what we need, more celebrities/content creators in positions of power

  29. 2 weeks ago
    Anonymous

    It flexes a bit in slow motion. Not that I think anyone's going to be mass manufacturing or selling the things, just interesting to see, I imagine it will be more of a display piece than being dragged out to shoot too often.

    • 2 weeks ago
      Anonymous

      >It flexes a bit in slow motion.
      that's completely normal though

      • 2 weeks ago
        Anonymous

        Ah so it's just how AK's are. Weird but I suppose it's not ultra hard to the point of being brittle.

    • 2 weeks ago
      Anonymous

      Ah so it's just how AK's are. Weird but I suppose it's not ultra hard to the point of being brittle.

      All guns are like that, go watch a Larry Vickers vid on anything, and you'll see that metal is basically jelly.

  30. 2 weeks ago
    Anonymous

    >wanted to make a 50 cal ak
    >ended up with a downs syndrome as50
    wow. how cool.

  31. 2 weeks ago
    Anonymous

    Is it supposed to not have a safety lever?

    • 2 weeks ago
      Anonymous

      safety is for homosexuals

    • 2 weeks ago
      Anonymous

      rule #1 of gun safety anon

  32. 2 weeks ago
    Anonymous

    How long before this piece of shit blows up like that other .50 cal did to that idiot youtuber ?

    • 2 weeks ago
      Anonymous

      That was an ammo issue, anon. Some third worlder reloaded SLAP with pistol powder and resold it as genuine. Would detonate any weapon that used it.

      • 2 weeks ago
        Anonymous

        >Some third worlder
        *The CIA
        FTFY

  33. 2 weeks ago
    Anonymous

    Does anyone know why the AK-50 has that weird little gap in the top left behind the BCG when the bolt is closed? I watched him shoot the RPK and AK and it doesn't exist in those. Why isn't that part of the stock/receiver closed off to the elements?

  34. 2 weeks ago
    Sieg heil

    He got titans of cnc to make him some parts which is pretty huge that guy is a big name in the machinist world

    You’ll never see titan shooting it because he’s a felon though

  35. 2 weeks ago
    Anonymous

    An upscaled Garand that feeds from yuge en blocs would be a lot cooler tbh. There was a Winchester .50 BMG rifle prototype made during WW2 that used a essentially a giant, box fed Garand action that worked great by all accounts so there's some precedent for it.

    • 2 weeks ago
      Anonymous

      Only if it goes PONG

  36. 2 weeks ago
    Anonymous

    He's massive zigger homosexual

    • 2 weeks ago
      Anonymous

      Lmao is he actually pro-Russian?

      • 2 weeks ago
        Anonymous

        yes

        ?si=l1oGBy18iCoSgjMl
        10:56

      • 2 weeks ago
        Anonymous

        yes

        ?si=l1oGBy18iCoSgjMl
        10:56

        >10:56
        hes talking about the US's history of sending weapons to countries we subsequently went to war with. USSR, Iraq, Afghanistan etc

        • 2 weeks ago
          Anonymous

          He said that in reference to aid package to Ukraine. If that's not proof that his a zigger c**t then you're stupid

          • 2 weeks ago
            Anonymous

            ok thats fine. im stupid because i don't suffer from aberrant salience.

            • 2 weeks ago
              Anonymous

              I am not crazy, you're just mad because your spick Internet daddy turned out to be contrarian zigger

              • 2 weeks ago
                Anonymous

                im not mad, im actually more of a russia enjoyer than brandon is.
                its just that your post "proving" he is doesnt show that at all

          • 2 weeks ago
            Anonymous

            I am not crazy, you're just mad because your spick Internet daddy turned out to be contrarian zigger

            tbh i dont really think hes even a genuine zigger.
            He simply is running for congress nomination against other republican dude, and he decided that best way do go at it, grab votes and make himself look different than the current guy, would be to court the fanatical trumptards.
            He got chummy with assclowns like Majorie Taylor Greene, and he toes the trumpist party line on every other issue, including these completely unrelated to guns - and that includes kvetching about ukraine getting military aid.
            He thinks his potential voterbase will be responsive to pro-zigger dogwhistles, so he makes them.
            Its just business.

    • 2 weeks ago
      Anonymous

      yes

      ?si=l1oGBy18iCoSgjMl
      10:56

      He said that in reference to aid package to Ukraine. If that's not proof that his a zigger c**t then you're stupid

      Lol.
      Imagine not supporting Russia.

      • 2 weeks ago
        Anonymous

        >supporting AIDS and replacing Christians with squinty Muslims

        • 2 weeks ago
          Anonymous

          >ukrainians
          >christians
          They're just another generic post-Soviet atheist state.
          Any aesthetic of Orthodoxy is just there for the looks.

          • 2 weeks ago
            Anonymous

            Whatever you say Mutthammad, I'm sure those people at Crocus City Hall were all quite happy with the push to support and protect more Muslims all around them.

            • 2 weeks ago
              Anonymous

              Outside of the crazy partially civilized Chechens, they're all atheists.
              The USSR was good at killing religion, any membership in Church is merely there for the social gathering and tradition, not any real religiosity.

  37. 2 weeks ago
    Anonymous

    sick of seeing this redditor wendigoon wannabe in my recommended. Literal marvel quips and penis jokes every 5 minutes. Are there any good fun YouTubers who aren't cringe?

  38. 2 weeks ago
    Anonymous

    I'm not gun expert but on slow-mo shots should gun be wobbling like that?

    • 2 weeks ago
      Anonymous

      Definitely not. All guns wobble a little but not that much. VSKAs probably wobble. I suspect the tolerances are unnecessarily loose in the AK-50 in some places, not a firearms expert though so idk why it is so bad. Probably that stamped receiver's fault since the bolt is made by Titan who are super precise

  39. 2 weeks ago
    Anonymous

    why are you discussing that zigger c**t, he's mystery meat mutt that should not be famous, let alone running for congress

  40. 2 weeks ago
    Anonymous

    >ak
    Looks and works like semiauto barret

    • 2 weeks ago
      Anonymous

      >recoil-operation and long-stroke gas-operation are the same now
      Contrarianism is a disease

      shooting through buildings/walls in urban warfare

      anti vehicle gun in places a gpmg cant fit/too heavy to carry

      idk

      The Gepard already fulfills the compact .50 niche unfortunately and the only country that bought them was UK; about 150 guns for the SAS

    • 2 weeks ago
      Anonymous

      Because you put the thing in and pull the thing really far back?
      moron.

  41. 2 weeks ago
    Anonymous

    what is the best tactical application of this weapon?

    • 2 weeks ago
      Anonymous

      shooting through buildings/walls in urban warfare

      anti vehicle gun in places a gpmg cant fit/too heavy to carry

      idk

  42. 2 weeks ago
    Anonymous

    >I'm running for government because Texas needs more guns.

    Yeah, okay, sure. But, throw in some healthcare maybe?

    • 2 weeks ago
      Anonymous

      Shut up homosexual.

    • 2 weeks ago
      Anonymous

      Put down the burger and jog

  43. 2 weeks ago
    Anonymous

    That was probably the most reddit intro to something I've ever seen

  44. 2 weeks ago
    Anonymous

    He looked moronic shooting it while the muzzle gyrated all over the place. I've seen African militants with better muzzle control. It was not a great showcase for the product and frankly, he should have done multiple takes.

  45. 2 weeks ago
    Anonymous

    Wouldn't be far cheaper to just buy a regular barret .50.
    And then do an AK style body kit for the barret?

    • 2 weeks ago
      Anonymous

      It would. But that way wouldn't allow you to attemt to reinvent the wheel and badly at that

  46. 2 weeks ago
    Anonymous

    Why is half the thread Ree'ing over the fact that a guy after nearly a decade produced a cool gun? This IS the fricking weapons board.

  47. 2 weeks ago
    Anonymous

    So what now?
    Is the AK-50 just going to be this 1 gun and a bunch of files on a few hard drives?
    Is it actually going to be brought to market?

    • 2 weeks ago
      Sieg heil

      >So what now?

      Nothing the video is made

      >Is the AK-50 just going to be this 1 gun and a bunch of files on a few hard drives?

      Yes, sometimes people do projects to get their name out there. Entertainment and marketing, this kid is likely going to be a fricking congressman over this shit I’d say it’s paid off majorly

      >Is it actually going to be brought to market?

      Not likely, design for manufactuability is a different language a different ethos all together and what he was doing was more of an entertainment enterprise

  48. 2 weeks ago
    Anonymous

    It's been up for quite awhile

  49. 2 weeks ago
    Anonymous

    I hope he wins his election, but I also hope I never have to hear about him again.

  50. 2 weeks ago
    Anonymous

    Zero odds Iran gets their hands on the AK-50 plans?
    Seems like a great Islamist ambush weapon, much easier to emplace then a 34 kg DShk and in theory every 75IQ Jihadi in the region will recognize its manual of arms

    Houthis would love it... no more single-loading Ahmed!

    • 2 weeks ago
      Anonymous

      I love big, crude muzzle brakes, I cannot lie.

    • 2 weeks ago
      Anonymous

      >Taliban mercing Blue helmets with AK-50's
      Send them Go-Pros as well, I need to see this.

  51. 2 weeks ago
    Anonymous

    >barrel whip
    >bolt carrier wobbling all over the place
    very ak

  52. 2 weeks ago
    Anonymous

    This far into the thread and NOBODY bothered asking the most important question
    who's gonna draw the waifu version of the gun

  53. 2 weeks ago
    Anonymous

    Someone should try manufacturing an inexpensive single shot .50bmg rifle under 2000$ dollars

    • 2 weeks ago
      Anonymous

      The last person to try and make a low cost 50 bmg rifle almost killed someone because the moron was shooting out of spec ammo thru it.

      • 2 weeks ago
        Anonymous

        >almost killed someone because the moron was shooting out of spec ammo thru it.
        That could happen to any gun though

      • 2 weeks ago
        Anonymous

        >out of spec ammo
        Not that you're wrong but I think that's underselling it a little

    • 2 weeks ago
      Anonymous

      The last person to try and make a low cost 50 bmg rifle almost killed someone because the moron was shooting out of spec ammo thru it.

      https://serbu.com/rn-50-29-5-barrel/

      It's likely that KB's ammo had something like 150k-180k PSI of chamber pressure vs the standard of 55-60k for 50BMG. That would have made most 50 BMG rifles explode.

  54. 2 weeks ago
    Anonymous

    Nice wonder how accurate it is, not a single shot of the target hits.

  55. 2 weeks ago
    Anonymous

    >entire thing is being based off an AK
    >looks more like an AS-50 than any AK variant.
    incredible.

    • 2 weeks ago
      Anonymous

      You might be on to something

    • 2 weeks ago
      Anonymous

      You're not wrong

Your email address will not be published. Required fields are marked *