It's like an AK except not made for retards. Why isn't it more popular?

It's like an AK except not made for morons. Why isn't it more popular?

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 1 month ago
    Anonymous

    It isn't more popular because Czechoslovakia wasn't handing them out like candy to every single terrorist organization and communist governments out there.

    • 1 month ago
      Anonymous

      That and Czechs never did like the Bulgarians: make USA compliant rifles for civilian customers. Czechs could have made lots of money, before the import ban.

  2. 1 month ago
    Anonymous

    Because czechs didn't sell them for cheap

  3. 1 month ago
    Anonymous

    >little aftermarket
    >cz not giving out technical data packages to their allies
    >never produced in moron tier numbers
    >lame and moronic short stroke system
    >god awful safety selector set up
    >doesn't even use ak mags lmao

    • 1 month ago
      Anonymous

      >god awful safety selector set up
      It's similar to an AR except on the opposite side

      • 1 month ago
        Anonymous

        Which is fricking moronic. IT'S ON THE WRONG SIDE
        WE DON'T HAVE ANY ACTUAL DIGIT THAT LINES UP WITH IT TO JUST FLICK IT ON/OFF LIKE ON THE AR
        IT IS AWFUL

        • 1 month ago
          Anonymous

          I'm a lefty so I'm happy about it

          • 1 month ago
            Anonymous

            freak

            • 1 month ago
              Anonymous

              buttbawd

        • 1 month ago
          Anonymous

          You don't have an index finger?

          • 1 month ago
            Anonymous

            Women

        • 1 month ago
          Anonymous

          >little aftermarket
          >cz not giving out technical data packages to their allies
          >never produced in moron tier numbers
          >lame and moronic short stroke system
          >god awful safety selector set up
          >doesn't even use ak mags lmao

          The aks safety is still like Gorilla tier moronic compared to the VZ.

    • 1 month ago
      Anonymous

      >lame and moronic short stroke system
      >god awful safety selector set up
      short stroke works just fine, you mongoloid. safety/selector is arguably better than an ak, which is admittedly a low bar

  4. 1 month ago
    Anonymous

    Made by a small nation of autistic slavs cosplaying as Austrians who just want to be left alone instead of a frickhuge nation of demi-Asians who literally can't stop themselves from trying to take a huge shit on every single lawn they can set foot in.

  5. 1 month ago
    Anonymous

    >no. built: 920,000
    >no. built: 75 million AK-47s, 100 million Kalashnikov-family weapons.[4][5]
    It's a mystery

    • 1 month ago
      Anonymous

      God, I hate math. It's just so unrelenting.

  6. 1 month ago
    Anonymous

    i dont like the mags
    therefore that's the reason it was unpopular

  7. 1 month ago
    Anonymous

    I just remembered pic is a thing.

    • 1 month ago
      Anonymous

      It isn't, but should be.

    • 1 month ago
      Anonymous

      Thanks I hate it

  8. 1 month ago
    Anonymous

    There was only like a million made and most of that was later given to friendly commie shitskins.

  9. 1 month ago
    Anonymous

    Too many morons

  10. 1 month ago
    Anonymous

    I bought a disassembled one from a scammer on GunBroker. No one in the USA even made a good receiver for those. I thought I was buying a simiauto Czech receiver, but it was an Ohio Ordinance (If I remember correctly) piece of shit. I ended up destroying the "receiver", because it was an un heat treated piece of shit.
    The barrel is also too short for it to be a regular rifle, so it would either be SPR paperwork for like a 1/2 inch too short or use another barrel.
    I heard Canadians love those, though. I don't know if the man-boy chief cuck of Canada banned those or not.

    • 1 month ago
      Anonymous

      They were incredibly popular up here in leaf-land until Aunt Trudy banned them back in May 2020. They were our primary cope-AK type rifles, and were popular because the ammo was cheap and they were a handy little rifle for larping with. Because they were non-restricted up until 2020, unlike ARs, you could legally frick about innawoods with them.

    • 1 month ago
      Anonymous

      >but it was an Ohio Ordinance (If I remember correctly) piece of shit
      Either that or Ohio Rapid Fire, which is possibly any even worse piece of shit if my experience was any indication. I understand having to do a little hand fitting, but I had to totally mangle the piston retainer to make it fit inside the barrel journal. The feed ramp or something was also cut wrong, keeping it from feeding hollow tips because they'd just bonk into the rim of the chamber. If I had to do it again I'd go with Tortort or a real Czech one.
      >The barrel is also too short for it to be a regular rifle, so it would either be SPR paperwork for like a 1/2 inch too short or use another barrel. Very frustrating experience.
      Unless you weld/silver solder a muzzle device or threaded extension on the end, then ATF says it's okay.

  11. 1 month ago
    Anonymous

    >like an ak
    The only similarity is the caliber.

    • 1 month ago
      Anonymous

      stop lying, it's virtually the same with an extra spring

  12. 1 month ago
    Anonymous

    If I recall right, isn't that short stroke along with many other differences?

    • 1 month ago
      Anonymous

      Yeah it's a *completely* different gun, it just looks a little like an AK because of the similar-looking gas block and the curvature of the magazine. It's a really lovely rifle, very thin and light (just over 6 lbs) compared to an AK.

      • 1 month ago
        Anonymous

        It's a bit *too* light, even. Points nicely and naturally but it's not as stable as heavier rifles

        The absolute state of zoomers

        Xeroxing as a word went out of fashion ages ago. I'm in the mid-30s and barely remember it used

  13. 1 month ago
    Anonymous

    Hard to find in the US. Fewer made than ak’s, Czechs exported fewer, mags and spare parts aren’t interchangeable with any other weapons, small market for parts and modifications.

    Too bad really. They’re handy little rifles.

    • 1 month ago
      Anonymous

      Tell me about it, I've been sitting on a first batch D-Technik that I've been trying to call up anywhere and everywhere I know to try to get it converted to take double stack mags and get a trigger guard with the grip ferrule put on along with the barrel components. I have all the parts, but everyone seems to be unwilling or too busy to do it. It's a shame, low double digit serial number of my favorite rifle and I just want it in it's original condition.

  14. 1 month ago
    Anonymous

    Why did the Czechs adopt the Bren instead of modernizing the 58 and converting it into the NATO round?

    • 1 month ago
      Anonymous

      Modernizations were attempted (mostly limited to railed handguards, optics and muzzle devices in small batches, , there were multiple deployments to the sandbox while the 58 was still a standard issue rifle).
      They weren't very good. Also 5.56 vz.58s existed as well.

      The main issue with any real overhaul of the 58 was that CZUB had long ago dismantled their production lines for the rifles, which they were showing their age (last ones were manufactured in the 80s) and no one really wanted another LADA project where you put lipstick on a Warsaw pact pig.

      • 1 month ago
        Anonymous

        >which they were
        Which were, frick me.

        • 1 month ago
          Anonymous

          Anywhere I could obtain that handguard? I use a bonesteel one but these look prettier.

          • 1 month ago
            Anonymous

            I don't think so, IIRC they actually bought literal airsoft grade stuff.
            Uncle had grandpa turn, drill, thread and cold blue a muzzle brake for his vz.58 for the first deployment, everyone in his unit literally just shared xeroxed schematics and made their own muzzle devices prior to deployment.

            • 1 month ago
              Anonymous

              Weird, so I guess my handguard is better

            • 1 month ago
              Anonymous

              >xeroxed schematics
              what the frick does that mean

              • 1 month ago
                Anonymous

                before it the copier, it was a xerox machine.
                Like tissue and kleenex

              • 1 month ago
                Anonymous

                The absolute state of zoomers

      • 1 month ago
        Anonymous

        223 model very nice

        • 1 month ago
          Anonymous

          Does it jam a lot?

          • 1 month ago
            Anonymous

            Not at all, whatever you feed it

  15. 1 month ago
    Anonymous

    if it took ak mags it would be
    the czechs could in fact re tool and make a new iteration but they dont want to invest in it

  16. 1 month ago
    Anonymous

    https://en.wikipedia.org/wiki/STV_rifle

    This is better

    • 1 month ago
      Anonymous

      >Galil ACE but worse
      But why

      • 1 month ago
        Anonymous

        it's slightly less israeli, for one

    • 1 month ago
      Anonymous

      How?

  17. 1 month ago
    Anonymous

    its not popular because they're like two grand and objectively kinda ugly in their stock format.

    • 1 month ago
      Anonymous

      I built one it only cost around 600 dollars to do it

    • 1 month ago
      Anonymous

      Quality AKs are around the same price.

  18. 1 month ago
    Anonymous

    was insanely popular in Canada for like 2 years and then Trudeau said no way hoser

Your email address will not be published. Required fields are marked *