yes, I'm literally building a folding FSB dissipator and ARFX/-E around this handguard for the PARA look. 20rd mags and a slickside upper, even got me one of those pic folding carry handles. The only reason I'm not done is because I'm trying to make absolutely certain nobody still makes a slick/fa delete AR-10 upper so I can commit to a direction. 16" 6.5cm cope FAL has my dick so fucking hard
>dissy >carry handle >slickside
Do you just like going out of your way to be suboptimal?
Funny how redditors always bitch about PrepHoleners being "contrarian", but as soon as you call out their compulsive, unfunny behavior they kvetch and immediately double down with no creativity whatsoever. Kek, enough PrepHole for me tonight.
I work for a guy who's closer to being a billionaire than a millionaire, and he owns a basic bitch M&P 15 and a stock Gen3 glock that he never shoots lol. The real poorfags are idiots like you who spend a lot of money on shit you'll never use and mostly paying for gucci brand shit like morons tend to do.
most gun owners will never understand this esoteric knowledge. you are blessed to know the grass is only slighter greener but much plusher on the side of not being a retard.
I put MOE furniture on my rifle when it came out fifteen years ago because I thought that having a moe rifle was really funny at the time.
I still think it's funny.
Also back then your other choices were Milspec, tapco shovelware or VLTOR/Larue/LMT stuff that I could not afford.
You can use mlok attachments on a MOE handguard, but having used mlok stuff on a different polymer handguard before I can safely say it's a garbage combination and permanently damages the handguard and probably doesn't hold zero for lasers.
Older MOE stuff doesn't have MLOK, newer MOE stuff that came out after MLOK standard was created, does.
MLOK was created in part because Keymod isn't strong enough on plastic furniture.
>I can safely say it's a garbage combination and permanently damages the handguard
On non-MLOK handguards you mean? I have a couple of polymer MLOK forends, and they don't get chewed up as long as you stick to the 15 in/lb torque spec Magpul publishes for metal to plastic mounting
basically this but with a T91 grip and a more attractive barrel setup, and a plum dye job on the furniture. A2 stock spacer works for the entry length on a full rifle tube?
yes, I'm literally building a folding FSB dissipator and ARFX/-E around this handguard for the PARA look. 20rd mags and a slickside upper, even got me one of those pic folding carry handles. The only reason I'm not done is because I'm trying to make absolutely certain nobody still makes a slick/fa delete AR-10 upper so I can commit to a direction. 16" 6.5cm cope FAL has my dick so fucking hard
Yeah.
fuck ya mudda
no matter how often you post this, it will never be funny
have a nice day back to
ya mudda? fuck her
All you reddit tourists should go back
See when the fuck ya mudda posting first popped up in the archives and it becomes very clear
Gee anon you sure do know a lot about r*ddit, you should probably fuck ya mudda
yeah it's on r*ddit in r/greentext you mongoloid
Welcome to the future millennial, here on zoomer PrepHole we fuck ya mudda
What a blowhard.
Fuck ya mudda
>dissy
>carry handle
>slickside
Do you just like going out of your way to be suboptimal?
fuck ya mudda
fuck ya mudda, pal
>6877 results found
kek
Wrong.
Fuck ya mudda
fukyamuda
Funny how redditors always bitch about PrepHoleners being "contrarian", but as soon as you call out their compulsive, unfunny behavior they kvetch and immediately double down with no creativity whatsoever. Kek, enough PrepHole for me tonight.
its cope for not owning this
I covet
I own both and unironically like the MOE better.
It's a cope for poverty.
I work for a guy who's closer to being a billionaire than a millionaire, and he owns a basic bitch M&P 15 and a stock Gen3 glock that he never shoots lol. The real poorfags are idiots like you who spend a lot of money on shit you'll never use and mostly paying for gucci brand shit like morons tend to do.
But what cars does he drive?
2009 honda accord with 157,623 miles
What's his name?
ya mudda.
I'm sure he has other hobbies he spends (lots of) money on. He's just not a gun guy
most gun owners will never understand this esoteric knowledge. you are blessed to know the grass is only slighter greener but much plusher on the side of not being a retard.
>I work for a guy who's closer to being a billionaire than a millionaire
In linear, exponential, or logarithmic terms?
we dont care about david choe, yoshi
stop eating his potato chips
No it’s a cope for not owning a piccatinny rail hand guard tbh senpai.
Nothing wrong with an FAL inspired AR. MOE handguard looks better the longer it is.
Fuk me that looks good man
I'm a sucker for non circular handguards. I want a wolf t1 for that reason alone.
Damn that's gorgeous
I put MOE furniture on my rifle when it came out fifteen years ago because I thought that having a moe rifle was really funny at the time.
I still think it's funny.
Also back then your other choices were Milspec, tapco shovelware or VLTOR/Larue/LMT stuff that I could not afford.
Holy fuck that’s ugly
It's moe.
Know what I think? Fuck ya mudda
MOE and MLOK are two different things
You can use mlok attachments on a MOE handguard, but having used mlok stuff on a different polymer handguard before I can safely say it's a garbage combination and permanently damages the handguard and probably doesn't hold zero for lasers.
Older MOE stuff doesn't have MLOK, newer MOE stuff that came out after MLOK standard was created, does.
MLOK was created in part because Keymod isn't strong enough on plastic furniture.
>I can safely say it's a garbage combination and permanently damages the handguard
On non-MLOK handguards you mean? I have a couple of polymer MLOK forends, and they don't get chewed up as long as you stick to the 15 in/lb torque spec Magpul publishes for metal to plastic mounting
>the falposter made a seethe and cope thread after getting absolutely ravaged in the AR thread
You need a kiss bro?
Yeah
What build?
basically this but with a T91 grip and a more attractive barrel setup, and a plum dye job on the furniture. A2 stock spacer works for the entry length on a full rifle tube?
well now I'm wondering if I can get one for my SCR and what it would look like.
There are more phFALlic handguards out there such as PRI Delta
Yeah
Big benis vibes
How light is everyone's ar?
choppa
Pretty sexy cope if you ask me
yes, I'm literally building a folding FSB dissipator and ARFX/-E around this handguard for the PARA look. 20rd mags and a slickside upper, even got me one of those pic folding carry handles. The only reason I'm not done is because I'm trying to make absolutely certain nobody still makes a slick/fa delete AR-10 upper so I can commit to a direction. 16" 6.5cm cope FAL has my dick so fucking hard