How difficult would this be, anyways. it's not like you are making a gun, just a body kit

How difficult would this be, anyways
it's not like you are making a gun, just a body kit

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 1 month ago
    Anonymous

    Why do you use the word "difficult" when that word doesn't have the same meaning as what you're trying to say?
    You're asking engineering related questions without having an engineering frame of mind.
    Ask the right questions.

    • 1 month ago
      Anonymous

      how much of a pain in the dick would this be then

      • 1 month ago
        Anonymous

        That's the wrong question.
        Let me help you along a bit; you should be asking how much it costs to make. Anything is possible, anon.
        For example, your front sight is going to have to be welded, peened or otherwise mechanically attached to your barrel. Are you willing to pay a gunsmith to do that? Do you already own a machine shop that could easily handle that kind of work?
        Ask the right questions, anon-kun.

        • 1 month ago
          Anonymous

          >For example, your front sight is going to have to be welded, peened or otherwise mechanically attached to your barrel. Are you willing to pay a gunsmith to do that?
          Unironically it doesn't. You can, 100% just have that mounted to the "body kit." It wouldn't really hold zero, yes, but it doesn't really need to. Since, you know, the optic is going to be doing the aiming job and a front site doesn't matter without a rear site anyway.

      • 1 month ago
        Anonymous

        But to be a little more serious, I don't think there's anything about the RFB's body kit that couldn't be 3D printed.
        It is, at the end of the day, two hunks of molded plastic held together by screws.
        There are a couple design features you put in that aren't necessarily positive changes, like having a frickhuge steel handguard for no particular reason, but nothing impossible.

    • 1 month ago
      Anonymous

      Fairly easy, you can look at CBRPS to see how his body kits are made. It's a lot of sheet metal and machined Delrin.

      "Difficult" is a perfectly valid word in engineering parlance.

      • 1 month ago
        Anonymous

        But what does difficult mean? You think it means expensive, but what if he thinks it's difficult just to think about because he's mentally moronic?
        Didn't think of that, huh?

        • 1 month ago
          Anonymous

          Stop

          • 1 month ago
            Anonymous

            This is a shitty thread, it's dead anyways. If I stop it'll just get page 10'd.

        • 1 month ago
          Anonymous

          Y r u gay

    • 1 month ago
      Anonymous

      Shut up homosexual

  2. 1 month ago
    Anonymous

    people do shit like this all the time for cosplay. it takes metal forming and joining skills and painting.

  3. 1 month ago
    Anonymous

    Not that hard, you could do most of it with basic tools. You can just use an existing flip up gas block with an appropriate front sight, though I don't know of one that that tall and narrow. Get it where you want it and then drill through the holes, leaving you with cuts on the barrel for the detent pins to hold it on. Handguard and stock shells can be 3d printed, and the trigger guard is just a strip of metal. Optic is just on a riser. Muzzle break is an unusually long duckbill break, would be particularly easy to fabricate with a drill and hacksaw if youre patient. All that is just window dressing, the most troublesome part is getting the gun itself right; youd need one of the long barrel target RFBs and to cut it down to whatever you interpret the DMR as being, which you certainly could do with a hacksaw but if you want to put a break on it later and not have it shoot like shit then you're better off having it milled off and threaded.

  4. 1 month ago
    Anonymous

    The RFB is unreliable garbage. If you build it off that gun you might as well just make it a non-functional plastic prop. Start with a rifle that actually works.

    • 1 month ago
      Anonymous

      Should also mention that on top of that, even if the RFB was a decent gun, your body kit would be closing off access to the gas regulator and blocking the ejection port. So this idea is non-viable.

      • 1 month ago
        Anonymous

        >non-viable
        >leave access hole for gas port
        >extend brass chute
        you were dropped a lot as a child, huh?

        • 1 month ago
          Anonymous

          Leaving some kind of access hole for the gas regulator that's large enough to facilitate inserting a cartridge and rotating it is probably feasible, though it would look moronic. But Black person, you want to double the length of the ejection chute, and then what, put a bend in it so that it clears the giant "front sight post"? Have you ever shot one of these things before? Their ejection is already extremely unreliable before you double the length of the conga line of brass and make it take a corner. If you wanted to body kit a bullpup, this is the wrong one to use. At least use one that ejects the same way as the gun you're copying. Practically every other bullpup on the market uses a standard side ejection port.

  5. 1 month ago
    Machinist

    The better question is why you would want these mods? The gun is already a pain to deal with when you get a jam or a misfire due to the way the ejection port works. This would add weight to the 32 inch version of the barrel you have pictured. You are covering up the gas adjustment knob. You are adding a huge front sight and no rear sight.

    Get a Tavor-7 and call it a day.

    • 1 month ago
      Anonymous

      hes trying to make it resemble the DMR from halo reach.

  6. 1 month ago
    Anonymous

    >how difficult
    for me? eh, probably a month off and on working at it.
    for you? most likely impossible.

  7. 1 month ago
    Anonymous

    Give me a Kel-Tec RFB, half a year and 100 000 USD, and I will give you back an M392 DMR bodykit and all the engineering drawings and CAD models required to produce it commercially.

  8. 1 month ago
    Anonymous

    Learn CAD, buy a 3D scanner and a 3D printer and you're good.

  9. 1 month ago
    Anonymous

    I don't know. MAybe like, 27 or 29 difficult

Your email address will not be published. Required fields are marked *