My MP5 is a service weapon, the model I have been issued is an MP5A1
It’s literally over 50 years old now, produced in 1967
It has been slapped by atleast 3 generations before me and I still slap it and there’s no way that thing will break off, it’s a solid steel part.
did babby try to replicate something he saw in cawa doody? awwwww
https://i.imgur.com/zjFAjD1.png
>if you HK slap the real thing, it'll snap like the airshit one!
I have an incredibly cheap flimsy airshit GSG-522 (yes, a licensed replica of the fucking .22LR MP5 at home) and I don’t think it’s even possible for it to break like that
>if you HK slap the real thing, it'll snap like the airshit one!
[...]
[...]
I have an incredibly cheap flimsy airshit GSG-522 (yes, a licensed replica of the fucking .22LR MP5 at home) and I don’t think it’s even possible for it to break like that
I have a 3d printed 22lr AR style pistol with an MP5 style charging handle made from an allen wrench
>OP broke his airsoft toy. >OP is a massive angry little gay. >OP is not allowed to post here. >OP cannot afford HK. >OP blames HK.
Next post OP snaps his femboy wrists and dick jacking off to anime bussy. >Why did women do this?
About 20 yrs ago the RCMP in my city of 90K had their annual open house. They let you finger fuck an actual service issue MP5. Well, someone was able to distract the officers and in a crowd of about 50 or 60 people, walked off with it. They still haven't recovered it but heard from both inside & outside that they still have an extreme hard-on trying to get it back. Literally jump on any slight rumour on its location.
It gets better. The following year a former instructor went to the open house, found they had an MP5 sans magazine just sitting on the table. He suggested they secure it to the table, to which the officer totally agreed and shortly after it was cabled to the table so one could still pick up and handle it but not take off with it. Oops. :-/
lol seethe more poor. They're not phillips. They're hex. And the forend came that way from hkparts. IDK if surefire used to make them like that or this was a field repair. But it works fine.
I am insanely jealous of you, anon.
About 20 yrs ago the RCMP in my city of 90K had their annual open house. They let you finger fuck an actual service issue MP5. Well, someone was able to distract the officers and in a crowd of about 50 or 60 people, walked off with it. They still haven't recovered it but heard from both inside & outside that they still have an extreme hard-on trying to get it back. Literally jump on any slight rumour on its location.
It gets better. The following year a former instructor went to the open house, found they had an MP5 sans magazine just sitting on the table. He suggested they secure it to the table, to which the officer totally agreed and shortly after it was cabled to the table so one could still pick up and handle it but not take off with it. Oops. :-/
Sorry anon but all 300 dollar airsoft guns are made of zinc potmetal. On aegs, the charging handle only serves to expose the hop up, so they are made intentionally flimsy so that retards like you can practice reloads and break it. Dont post it here, theres a thread on PrepHole for that shit.
>roaches make a bent sheet metal gun, sell it for 800 dollars
REEEEEE TO EXPENSIVE >HK makes the exact same gun but with less features and a pinned receiver for 3000 dollars
YASSS QUEEN SLAY
I don’t know why people treat MP5s like some sort of magic unobtainium, they aren’t particulary expensive and they are still manufactures.
Only the giggle switches are rare
If you just want to have the fun of shooting an MP5, get a turk, they’re the same and if you care about having the real deal just invest a big
there's an undeniable difference in look and feel between the two guns side by side. Turk 5s are grittier than HKs and the welds are worse. functionally they work the same and if you can afford an HK there's no reason not to, however, if you can't a turk will be fine
sheeeeeeeit that's definitely more reasonable, but why is that one almost 300 less than the other ones they have listed? is there a catch, or are they just trying to move an unpopular model?
2 weeks ago
Anonymous
the AP5-P is the mp5k version and also isn't threaded
2 weeks ago
Anonymous
the ap5-M lacks a tri-lug or barrel threading and a lot of people buying these love messin around with muzzle breaks and suppressors, so the lack of that fixture hurts the curb appeal.
Still a great gun.
I'd noticed that but assumed there must have been something I was missing for there to be such a large difference. it's much less soulful without the tri lug
2 weeks ago
Anonymous
did some big reviewer dragged Century Arms and they gotta drop some prices just to move them? Does that even happen?
2 weeks ago
Anonymous
the ap5-M lacks a tri-lug or barrel threading and a lot of people buying these love messin around with muzzle breaks and suppressors, so the lack of that fixture hurts the curb appeal.
they've been cheap all year
I bought my standard AP5 way early in the year for 900ish
Century Arms probably had a deal with HK to not sell these crocks of shit at what they are actually worth and it expired
nice airsoft
Sure thing HK fanboy
Airshit aside roughhousing 1/10th of an inch thick parts on precision instruments will always be retarded.
>inb4 is in manual!!
don't care
>if you HK slap the real thing, it'll snap like the airshit one!
My MP5 is a service weapon, the model I have been issued is an MP5A1
It’s literally over 50 years old now, produced in 1967
It has been slapped by atleast 3 generations before me and I still slap it and there’s no way that thing will break off, it’s a solid steel part.
You can see the plastic my dude
sure it is buddy
I have an incredibly cheap flimsy airshit GSG-522 (yes, a licensed replica of the fucking .22LR MP5 at home) and I don’t think it’s even possible for it to break like that
Mystery pot metal anon
I have a 3d printed 22lr AR style pistol with an MP5 style charging handle made from an allen wrench
Im retarded and didnt put the second half, I have that janky homemade piece, and its standed up to hundreds and hundreds of slaps
did babby try to replicate something he saw in cawa doody? awwwww
>turkshit
>unable to discern airshit this blatant
God damn how do you function being this braindead?
>HK
>Philips head screws
Take your bait somewhere else gay
Show us the roll mark
>OP broke his airsoft toy.
>OP is a massive angry little gay.
>OP is not allowed to post here.
>OP cannot afford HK.
>OP blames HK.
Next post OP snaps his femboy wrists and dick jacking off to anime bussy.
>Why did women do this?
Sucks for you Anon. Mine's real.
I am insanely jealous of you, anon.
About 20 yrs ago the RCMP in my city of 90K had their annual open house. They let you finger fuck an actual service issue MP5. Well, someone was able to distract the officers and in a crowd of about 50 or 60 people, walked off with it. They still haven't recovered it but heard from both inside & outside that they still have an extreme hard-on trying to get it back. Literally jump on any slight rumour on its location.
It gets better. The following year a former instructor went to the open house, found they had an MP5 sans magazine just sitting on the table. He suggested they secure it to the table, to which the officer totally agreed and shortly after it was cabled to the table so one could still pick up and handle it but not take off with it. Oops. :-/
Take your Phillips head bullshit somewhere else gay
lol seethe more poor. They're not phillips. They're hex. And the forend came that way from hkparts. IDK if surefire used to make them like that or this was a field repair. But it works fine.
lol guess they found out.
why is there so much carbon fouling on your muzzle?
probably because it's a polymer mold to look like a muzzle
what the hell does that have to do with carbon fouling?
...there isn't any. It's a toy
Also, from looking at mine, where the handle attaches isn't round but more of an oval shape.
Airshit bait post doesn't change the fact that HK's rollmark should be a raccoon because of how trash they are nowadays.
The screws and muzzle ruin your bait
>gay posts obvious airshit
>chimps out when everyone notices
saged and hidden
Sorry anon but all 300 dollar airsoft guns are made of zinc potmetal. On aegs, the charging handle only serves to expose the hop up, so they are made intentionally flimsy so that retards like you can practice reloads and break it. Dont post it here, theres a thread on PrepHole for that shit.
>HK SLA- oh fuck
its
>HK SL-Ack!
you silly goose
I had a tokyo marui mp5. Slapped the shit out of that handle til it broke. Looked just like that.
I've got a marui MP5K
Really regret not spending a bit extra so I could get one with a movable charging handle and recoil
Not a real H&K. Show me the roll mark.
It's airsoft, my dudes. Look at the front end/cocking tube: it's not welded into the receiver, making it a dead giveaway.
turkish mp5s have been at literally the cheapest a roller delayed gun has ever been in the history of humanity
you fuckers have no excuse
>the cheapest a roller delayed gun has ever been
$400 cetme
>mp5/p30 chad
my bro
roaches want way too much money for their basic ass sheet metal guns
>roaches make a bent sheet metal gun, sell it for 800 dollars
REEEEEE TO EXPENSIVE
>HK makes the exact same gun but with less features and a pinned receiver for 3000 dollars
YASSS QUEEN SLAY
in before some buyer's remorse shows up and starts slobbering about how '''authentic''' h&k's just 'feel' better or some silly shit.
I don’t know why people treat MP5s like some sort of magic unobtainium, they aren’t particulary expensive and they are still manufactures.
Only the giggle switches are rare
If you just want to have the fun of shooting an MP5, get a turk, they’re the same and if you care about having the real deal just invest a big
there's an undeniable difference in look and feel between the two guns side by side. Turk 5s are grittier than HKs and the welds are worse. functionally they work the same and if you can afford an HK there's no reason not to, however, if you can't a turk will be fine
last I checked the roach ones go for around 1800
https://atlanticfirearms.com/century-arms-ap5-m-HG6036AL-N
lol, lmao even
good lord.
sheeeeeeeit that's definitely more reasonable, but why is that one almost 300 less than the other ones they have listed? is there a catch, or are they just trying to move an unpopular model?
the AP5-P is the mp5k version and also isn't threaded
I'd noticed that but assumed there must have been something I was missing for there to be such a large difference. it's much less soulful without the tri lug
did some big reviewer dragged Century Arms and they gotta drop some prices just to move them? Does that even happen?
the ap5-M lacks a tri-lug or barrel threading and a lot of people buying these love messin around with muzzle breaks and suppressors, so the lack of that fixture hurts the curb appeal.
Still a great gun.
1.1k in cart
Post the rest of it and prove it's not turkshit.
single digit iq brainlet here. Why don’t they call it CETME slap?
probably because while the cetme invented it, h&k popularized it.
I'm sure that's a cheap and highly available part because HK aren't gays.
they've been cheap all year
I bought my standard AP5 way early in the year for 900ish
Century Arms probably had a deal with HK to not sell these crocks of shit at what they are actually worth and it expired
how do you like ur century arms? I bought a ptr clone and i've had two failure to feed in 3000 rounds.
That's not an SP5