here's your all-metal bullpup with a good trigger, bro

here's your all-metal bullpup with a good trigger, bro

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 2 weeks ago
    Anonymous

    it's an aluminum extrusion with a lower bolted on.

    • 2 weeks ago
      Anonymous

      it uses ar takedown pins

    • 2 weeks ago
      Anonymous

      The scar is an extrusion also

      • 2 weeks ago
        Anonymous

        THATS TOTALLY DIFFERENT!!1!1!1

    • 2 weeks ago
      Anonymous

      So's your mom, still managed to pop you out.

    • 2 weeks ago
      Anonymous

      >You now notice it's literally the same extrusion that holds the rail your blinds run on

      • 2 weeks ago
        Anonymous
  2. 2 weeks ago
    Anonymous

    Looks like dogshit compared to original

    • 2 weeks ago
      Anonymous

      https://i.imgur.com/RseoAWb.jpeg

      here's your all-metal bullpup with a good trigger, bro

      I really hate that they broke up the line of the receiver behind the mag well

  3. 2 weeks ago
    Anonymous

    the lower is polymer anon

    • 2 weeks ago
      Anonymous

      So same as the SCAR?

    • 2 weeks ago
      Anonymous

      It isn't, I owned one

    • 2 weeks ago
      Anonymous

      moron

  4. 2 weeks ago
    Anonymous

    hold up...

    • 2 weeks ago
      Anonymous

      >$700 for just the lower shell alone

      • 2 weeks ago
        Anonymous

        it's under $600 on Brownells with coupon code

      • 2 weeks ago
        Anonymous

        So what homie boo fricking hoo. Stripped radian and lmt lowers are about 300. The fm uppers are cheap as frick and work well, it evens out for your special snowflake ass self

      • 2 weeks ago
        Anonymous

        >doesn't need a bg check
        >compatible with existing NFA lower

        Its the best option and its really good. I use it with 7.62 irl

    • 2 weeks ago
      Anonymous

      https://i.imgur.com/wYgoMFp.jpeg

      Looks a lot like the old Bushmaster M17.

      https://i.imgur.com/a7xsgJT.jpeg

      I like my triad with a jakl in .300blk

      https://i.imgur.com/xpI4nfE.jpeg

      Great need for AKB-23 whenever it actually comes out

      https://i.imgur.com/NUqujmv.jpeg

      is this the thread for TriCHADs?

      https://i.imgur.com/jo1KhpF.jpeg

      My buddy has one in 308. I only shot a mag through it but it seemed pretty nice.

      Are theses FAMAS?

      • 2 weeks ago
        Anonymous

        FAMAE

  5. 2 weeks ago
    Anonymous

    Looks a lot like the old Bushmaster M17.

    • 2 weeks ago
      Anonymous

      it is except shittier looking and no carry handle

    • 2 weeks ago
      Anonymous

      Because it is, https://youtu.be/mLL0WYN7R78?t=745

    • 2 weeks ago
      Anonymous

      >why does M17S look like M17?

      • 2 weeks ago
        Anonymous

        Go easy on the conspiracy theories, anon

    • 2 weeks ago
      Anonymous

      Leave it to the Australians to make a gun out of a fricking gutter

      • 2 weeks ago
        Anonymous

        you can get like 30 feet of aluminum square tube for like $7 AND the extrusion process work hardens it and allogns the grain, so it's as strong as a forging for chump change.
        plus it requires no surface machining. it's a really good option.

  6. 2 weeks ago
    Anonymous

    I like my triad with a jakl in .300blk

    • 2 weeks ago
      Anonymous

      Sweet build anon, how (well) does the lower attach to the barrel shroud?

      • 2 weeks ago
        Anonymous

        A3 sells a specific lower handguard for JAKL uppers that has a build in piece for the front take-down pin.

        • 2 weeks ago
          Anonymous

          Thanks anon, this is my dream build and I was looking at the Scy lower but this might do better.
          If I can continue to bother you with questions, have you weighed that gun? And did the 300 Blackout Jakl have a gas shutoff mode for ultimate quiet?

          • 2 weeks ago
            Anonymous

            The Jakl has no off position. Weight wise is surprisingly heavy for what it is. its like 8-9lbs unloaded without the suppressor.

            Just got the kit this week. How does it handle suppression? Anything A3 recommends there?

            I find that when shooting suppressed, It needs to be on fully open, and non-suppressed on the lowest option. Makes it easy to switch between them since its either fully clockwise or counter clockwise.

            I'm sorry but this looks moronic

            ok

    • 2 weeks ago
      Anonymous

      I'm sorry but this looks moronic

    • 2 weeks ago
      Anonymous

      Just got the kit this week. How does it handle suppression? Anything A3 recommends there?

    • 2 weeks ago
      Anonymous

      backwards 510c was a delightful touch

  7. 2 weeks ago
    Anonymous

    >Caribbean mulatto man and pot bellied Ivan did a Youtube on this
    >"If they were made today, there would be no reason these should cost more than ~$250"
    >Go to K&M Arms to see their prices on new ones
    >MSRP: $2000
    Is this the power of talking out your anus?

    • 2 weeks ago
      Anonymous

      K&M is literally one guy in a shack with no production lines. Every guy might as well be custom made

      • 2 weeks ago
        Anonymous

        No, its the power of a hypothetical where it remained in production and enjoyed the benefits of mass manufacturing and widespread adoption.
        Id say you have a reading comprehension issue, but you didn't even have to read. You just needed to listen.

        Fair enough, even some single shot break action would be expensive if it was being made by one person.

        • 2 weeks ago
          Anonymous

          >even some single shot break action would be expensive if it was being made by one person
          No reason it needs to be that expensive even with a just a single person making them.

      • 2 weeks ago
        Anonymous

        >literally one guy
        It's a shame because I think he could use some extra help with marketing. I try to stop by his table to say hi whenever I see him at the gun show.

    • 2 weeks ago
      Anonymous

      No, its the power of a hypothetical where it remained in production and enjoyed the benefits of mass manufacturing and widespread adoption.
      Id say you have a reading comprehension issue, but you didn't even have to read. You just needed to listen.

      • 2 weeks ago
        Anonymous

        I get the theoretical advantage of just shitting out guns in alloy extrusions but are there any other reason why we don't see more of them? You think the Chinese would have at least tried it besides the Belgians and down undies.

        • 2 weeks ago
          Anonymous

          We do.
          Half of all modern assault rifles are made that way.
          SCAR, HK433, BREN, B&T APC, etc.

  8. 2 weeks ago
    Anonymous

    I watched a video a while back, can't remember who, that said the aluminum receiver gets really hot after just like 1 mag.

  9. 2 weeks ago
    Anonymous

    Great need for AKB-23 whenever it actually comes out

  10. 2 weeks ago
    Anonymous

    is this the thread for TriCHADs?

    • 2 weeks ago
      Anonymous

      I really want to build mine but it requires a lower with a trigger guard that can be removed and none of mined can except the one I don't want to remove it from. So I have to 3d print one.

      • 2 weeks ago
        Anonymous

        i just got a cheapo anderson lower. my first anderson I was really impressed with the quality of it after avoiding that brand for so long

  11. 2 weeks ago
    Anonymous

    My buddy has one in 308. I only shot a mag through it but it seemed pretty nice.

    • 2 weeks ago
      Anonymous

      Ever had a shell deflect back into the upper?

    • 2 weeks ago
      Anonymous

      what gelcups are those on 3M peltors?

  12. 2 weeks ago
    Anonymous

    I have one of these
    the upper is cavernous.
    I've had shells get stuck in there 4 real

  13. 2 weeks ago
    Anonymous

    it breaks a lot

  14. 2 weeks ago
    Anonymous

    >tape, straps, cords, and wraps
    So tactical I'm gonna tacti-cum!

Your email address will not be published. Required fields are marked *