Gun Parts Quality

What makes this upper worth $850?

I'm not against paying a price if the quality is there, i just don't know what "quality" means.

From where I'm standing I can't imagine it being too hard to make a rifled pipe with a gas tube that doesn't clog too fast. This technology has existed for a long time, and the AR platform is standard.

Responses containing anecdotes are welcome, however I'd also like some general knowledge with the response as it relates to what I'm looking for when buying parts, especially uppers, since that's what I'm looking at presently.

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 11 months ago
    Anonymous

    That's a budget upper

    • 11 months ago
      Anonymous

      need more info. why?

      • 11 months ago
        Anonymous

        I like the long rail on this one.

        what won't this do for me?

        • 11 months ago
          Anonymous

          Fire a round that isn't moronic for modern applications for one

  2. 11 months ago
    Anonymous

    Why are ARgays finally getting into 7.62x39 now that cheap ammo is gone?

    • 11 months ago
      Anonymous

      This aint nothing new zoomer, and more people arent getting into it

      • 11 months ago
        Anonymous

        No its relatively new you zoomies are only getting into 7.62x39 ARs because muh Sig did it. Everyone else already know 7.62x39 ARs are garbage and fragile unless they're AR 10 derived.

        • 11 months ago
          Anonymous

          7.62x39 ars are dogshit. Every single one. Buy a bren, ptr, or vz58 if you don’t want an ak.

          Sigs is a piece of shit too. Atrocious rail flex, the gun can’t get through 4 mags. I have never seen a 7.62x39 derived ar-10 that was shit either. Cmmgs mutant isnt good either, and cmmg is a pretty good company.

          • 11 months ago
            Anonymous

            >"7.62x39 ars are dogshit"
            Even that mutant thinga magib, the one that takes AK mags?

            • 11 months ago
              Anonymous

              >Cmmgs mutant isnt good either, and cmmg is a pretty good company.

              It was literally in the post you replied to.

        • 11 months ago
          Anonymous

          where are you buying 762 ammo? i just looked it up for the first time in about 7 months and it's doubled in price.

  3. 11 months ago
    Anonymous

    Unless you can find something that says the bolt is a 308 bolt or based on the ar10, etc. you should close that tab and 360 moonwalk away.

  4. 11 months ago
    Anonymous

    are you black bastards just going to argue or are you going to fricking help?

    this turned into a bunch of monkeys flinging shit faster than your mom on a saturday night.

    • 11 months ago
      Anonymous

      I don't know OP, I like getting a deal so I will always shop around and try to get a good cost for benefit ratio. It doesn't matter what product it is or how much money I have. I would never buy something like this because I've already bought an aero upper I was thrilled with that was less than half that much.

      • 11 months ago
        Anonymous

        how much did you pay? because I found a 762 upper that is 474$

    • 11 months ago
      Anonymous

      This isn’t your thread anon. Thread belong to no OP. You simply post and hope to get something out of it.

  5. 11 months ago
    Anonymous

    7.62x39 is overrated. It was fun when it was cheap and plentiful. Now it's time to grow up and put childish things aside.

    • 11 months ago
      Anonymous

      offer a solution, not your feelings

      • 11 months ago
        Anonymous

        5.56

        • 11 months ago
          Anonymous

          Lol, lmao even

          • 11 months ago
            Anonymous

            >What's 2+2?
            >4, moron
            >that's not the answer I want, give me a REAL answer
            Okay well your dumb ass isn't going to pay up for .300blk so that's off the table
            You considered taking up knitting?

          • 11 months ago
            Anonymous

            >I'll just use a platform designed to shoot 5.56 and shoot 7.62x39 out of it. >That'll show em.
            Ok.

          • 11 months ago
            Anonymous

            >Lol, lmao even

            that wore out too fast. you have to space those out. it's been a few days since that started trending and it's already not funny because we know where it's going.

  6. 11 months ago
    Anonymous

    Listen here OP,
    RRA is like, the Taco Johns of rifles
    If that
    You can do better

    • 11 months ago
      Anonymous

      wow. i can tell you know so much about guns. are you a gun god?

  7. 11 months ago
    Anonymous

    >I can't imagine it being too hard to make a rifled pipe with a gas tube that doesn't clog too fast.
    What a dumb reduction. Yeah, because that's all there is to it. No tolerance, no materials, no process of manufacturing, no QA, nope nothing.

    I hate obtuse morons that make statements like this. Let's apply it to food, or cars, or homes.
    >"It can't be too hard to cook meat. What's the difference between that filet and this mcdouble hurrrrrr." - You.
    Sure sounds dumb as shit. Spend some time to learn what the frick you're babbling about before asking everyone to spoon feed you. In closing: have a nice day.

    • 11 months ago
      Anonymous

      >What a dumb reduction. Yeah, because that's all there is to it. No tolerance, no materials, no process of manufacturing, no QA, nope nothing.
      what a moronic deduction. i thought none of that, and i was the top performing machinist at my factory for years... why does everyone on this board try to attack people as if they're going to prove something?

      >I hate obtuse morons that make statements like this. Let's apply it to food, or cars, or homes.

      you should now be convinced that you are psychologically projecting. both here and the previous sentence.

      >>"It can't be too hard to cook meat. What's the difference between that filet and this mcdouble hurrrrrr." - You.
      >Sure sounds dumb as shit. Spend some time to learn what the frick you're babbling about before asking everyone to spoon feed you. In closing: have a nice day.

      STILL no solution. typical user of this board. born loser lol. My gun collection is better than yours, poorgay

      • 11 months ago
        Anonymous

        >My gun collection is better than yours, poorgay

        Pffft. You morons acts like that hurts feelings or something. Calling people out for posting on/k/ when you make threads on /k/... Nobody cares about your collection of junk. No wonder nobody will give you any advice.. haha loser.

      • 11 months ago
        Anonymous

        >i thought none of that
        Yeah because you're a fricking moron that didn't even attempt to do some self learning.
        >NOOOOO YOU'RE PROJECTING
        You're a fricking moron. COPE.
        >REEEEE NO SOLUTION MY GUNS BETTER THAN UR GUNS
        Oh the copening. Post your collection.

  8. 11 months ago
    Anonymous

    >From where I'm standing I can't imagine it being too hard to make a rifled pipe with a gas tube that doesn't clog too fast

    Barrels are actually the hardest thing on a gun to make. The method of manufacture influences cost, whether it's cut, buttoned or cold hammer forged. Then you have the chrome lining which also adds to the cost. A lot of the time, you will also be paying for the brand name obviously.

    Frick Ukraine btw.

    • 11 months ago
      Anonymous

      >Frick Ukraine btw
      But why?

      • 11 months ago
        Anonymous

        Because it turned this board into complete shit.

        • 11 months ago
          Anonymous

          Fair point

        • 11 months ago
          Anonymous

          Blame Russia you stupid c**t

          • 11 months ago
            Anonymous

            I don't see Russian shills shitting up the board 24/7.

            • 11 months ago
              Anonymous

              funny, everyone else did.
              well before the invasion.
              and after it? quite a few pro ukraine stuff is them too.

              • 11 months ago
                Anonymous

                Ok Taras. You got anything to say about the actual topic?

              • 11 months ago
                Anonymous

                nope.
                is that supposed to matter?
                if OP is too much of a pussy to try and fight for his own thread, he deserves to get shit on lol.

                https://i.imgur.com/a790zLn.jpg

                typical slav shitting up the thread
                [...]
                Nothing makes it worth $850, it's more that its a niche style, and so needs different parts that also need different machines to make. Since 5.56/.223 is cheaper than 7.62x39 now, you're better off getting a higher tier upper in 5.56 to last you a long time. Go consult /arg/ for info if they don't call you a poorgay first

                weak. you fairies pissing and shitting over the war existing caused just as much drama, and is part of what drove vatniks to be obnoxious pro ukraine c**ts to make you tards seethe.

              • 11 months ago
                Anonymous

                uh huh
                yeah okay

              • 11 months ago
                Anonymous

                >doesn't have an argument
                >too insecure to let the issue lay
                >insists on replying to preserve ego and hope he gets something worth talking about

                https://i.imgur.com/Pe9z1KE.png

                >SlavBlack person gets found out
                >Still shits up thread
                Sad!

                damn what a waste of quads.... would have been great if I was the one that first started whining out of nowhere about the war
                >op makes dumb thread outside of /arg/
                >entire thread is shat up
                >single out the one guy laughing at a crybaby who decided to cry about muh ukraine in an unrelated thread

              • 11 months ago
                Anonymous

                >SlavBlack person gets found out
                >Still shits up thread
                Sad!

              • 11 months ago
                Anonymous

                do you even know what ontological means?
                saying "No." with a chad face isn't a good answer.

              • 11 months ago
                Anonymous

                there is nothing wrong with the meme other than it being misplaced.

              • 11 months ago
                Anonymous

                >saying "No." with a chad face isn't a good answer.
                Wrong

              • 11 months ago
                Anonymous

                >nope
                Wow, what a surprize.

              • 11 months ago
                Anonymous

                typical slav shitting up the thread

                https://i.imgur.com/77ayt1J.png

                What makes this upper worth $850?

                I'm not against paying a price if the quality is there, i just don't know what "quality" means.

                From where I'm standing I can't imagine it being too hard to make a rifled pipe with a gas tube that doesn't clog too fast. This technology has existed for a long time, and the AR platform is standard.

                Responses containing anecdotes are welcome, however I'd also like some general knowledge with the response as it relates to what I'm looking for when buying parts, especially uppers, since that's what I'm looking at presently.

                Nothing makes it worth $850, it's more that its a niche style, and so needs different parts that also need different machines to make. Since 5.56/.223 is cheaper than 7.62x39 now, you're better off getting a higher tier upper in 5.56 to last you a long time. Go consult /arg/ for info if they don't call you a poorgay first

        • 11 months ago
          Anonymous

          Haha frick you. /k/ was dead before the war kicked off and now you're mad Russia is getting buttfrickdd for all the world to see hahaha

          • 11 months ago
            Anonymous

            Proxy wars aren't funny tho. Think about all of our tax money that came out of our pockets without our vote to fund these Black folk.

            • 11 months ago
              Anonymous

              >Think about all of our tax money that came out of our pockets without our vote to fund these Black folk
              You do realize that the vast majority of aid that we've given Ukraine is mothballed equipment that would otherwise have to be stored and maintained?

              • 11 months ago
                Anonymous

                Yeah. Also all the equipment left in the M.E. All that cold, hard cash that has ended up in someone else's pocket than the American people's. You are really convincing me bro...

              • 11 months ago
                Anonymous

                >All that cold, hard cash
                Did you even read what I posted?

              • 11 months ago
                Anonymous

                >Pallets of cash

                Yeah, yeah I heard you.... something something mothballs and maintenance. You are only talking about the equipment.... and weapons....

              • 11 months ago
                Anonymous

                Where are you getting the "pallets of cash" from?

              • 11 months ago
                Anonymous

                I didn't get anything from you, bud.

              • 11 months ago
                Anonymous

                How much money, just money, has gone to Ukraine? Can you answer that?

              • 11 months ago
                Anonymous

                No, but are you aware of it?

              • 11 months ago
                Anonymous

                Do you know how many pallets 1 billion dollars in $100 bills is? About 12.

              • 11 months ago
                Anonymous

                It seems like you're trying to make a point, so just spit it out

              • 11 months ago
                Anonymous

                >Proxy wars aren't funny tho.
                I feel as if my initial statement was enough.

  9. 11 months ago
    Anonymous

    >HBAR
    that's probably a big part of the price. Do you really need a heavy barrel? Are you going to be putting 1000 rounds through it at full auto or something?

  10. 11 months ago
    Anonymous

    7.62x39 ar upper, lmfao

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *