What makes this upper worth $850?
I'm not against paying a price if the quality is there, i just don't know what "quality" means.
From where I'm standing I can't imagine it being too hard to make a rifled pipe with a gas tube that doesn't clog too fast. This technology has existed for a long time, and the AR platform is standard.
Responses containing anecdotes are welcome, however I'd also like some general knowledge with the response as it relates to what I'm looking for when buying parts, especially uppers, since that's what I'm looking at presently.
That's a budget upper
need more info. why?
I like the long rail on this one.
what won't this do for me?
Fire a round that isn't retarded for modern applications for one
Why are ARfags finally getting into 7.62x39 now that cheap ammo is gone?
This aint nothing new zoomer, and more people arent getting into it
No its relatively new you zoomies are only getting into 7.62x39 ARs because muh Sig did it. Everyone else already know 7.62x39 ARs are garbage and fragile unless they're AR 10 derived.
7.62x39 ars are dogshit. Every single one. Buy a bren, ptr, or vz58 if you don’t want an ak.
Sigs is a piece of shit too. Atrocious rail flex, the gun can’t get through 4 mags. I have never seen a 7.62x39 derived ar-10 that was shit either. Cmmgs mutant isnt good either, and cmmg is a pretty good company.
>"7.62x39 ars are dogshit"
Even that mutant thinga magib, the one that takes AK mags?
>Cmmgs mutant isnt good either, and cmmg is a pretty good company.
It was literally in the post you replied to.
where are you buying 762 ammo? i just looked it up for the first time in about 7 months and it's doubled in price.
Unless you can find something that says the bolt is a 308 bolt or based on the ar10, etc. you should close that tab and 360 moonwalk away.
are you black bastards just going to argue or are you going to fucking help?
this turned into a bunch of monkeys flinging shit faster than your mom on a saturday night.
I don't know OP, I like getting a deal so I will always shop around and try to get a good cost for benefit ratio. It doesn't matter what product it is or how much money I have. I would never buy something like this because I've already bought an aero upper I was thrilled with that was less than half that much.
how much did you pay? because I found a 762 upper that is 474$
This isn’t your thread anon. Thread belong to no OP. You simply post and hope to get something out of it.
7.62x39 is overrated. It was fun when it was cheap and plentiful. Now it's time to grow up and put childish things aside.
offer a solution, not your feelings
Lol, lmao even
>that's not the answer I want, give me a REAL answer
Okay well your dumb ass isn't going to pay up for .300blk so that's off the table
You considered taking up knitting?
>I'll just use a platform designed to shoot 5.56 and shoot 7.62x39 out of it. >That'll show em.
>Lol, lmao even
that wore out too fast. you have to space those out. it's been a few days since that started trending and it's already not funny because we know where it's going.
Listen here OP,
RRA is like, the Taco Johns of rifles
You can do better
wow. i can tell you know so much about guns. are you a gun god?
>I can't imagine it being too hard to make a rifled pipe with a gas tube that doesn't clog too fast.
What a dumb reduction. Yeah, because that's all there is to it. No tolerance, no materials, no process of manufacturing, no QA, nope nothing.
I hate obtuse retards that make statements like this. Let's apply it to food, or cars, or homes.
>"It can't be too hard to cook meat. What's the difference between that filet and this mcdouble hurrrrrr." - You.
Sure sounds dumb as shit. Spend some time to learn what the fuck you're babbling about before asking everyone to spoon feed you. In closing: have a nice day.
>What a dumb reduction. Yeah, because that's all there is to it. No tolerance, no materials, no process of manufacturing, no QA, nope nothing.
what a retarded deduction. i thought none of that, and i was the top performing machinist at my factory for years... why does everyone on this board try to attack people as if they're going to prove something?
>I hate obtuse retards that make statements like this. Let's apply it to food, or cars, or homes.
you should now be convinced that you are psychologically projecting. both here and the previous sentence.
>>"It can't be too hard to cook meat. What's the difference between that filet and this mcdouble hurrrrrr." - You.
>Sure sounds dumb as shit. Spend some time to learn what the fuck you're babbling about before asking everyone to spoon feed you. In closing: have a nice day.
STILL no solution. typical user of this board. born loser lol. My gun collection is better than yours, poorfag
>My gun collection is better than yours, poorfag
Pffft. You retards acts like that hurts feelings or something. Calling people out for posting onPrepHole when you make threads on PrepHole... Nobody cares about your collection of junk. No wonder nobody will give you any advice.. haha loser.
>i thought none of that
Yeah because you're a fucking moron that didn't even attempt to do some self learning.
>NOOOOO YOU'RE PROJECTING
You're a fucking moron. COPE.
>REEEEE NO SOLUTION MY GUNS BETTER THAN UR GUNS
Oh the copening. Post your collection.
>From where I'm standing I can't imagine it being too hard to make a rifled pipe with a gas tube that doesn't clog too fast
Barrels are actually the hardest thing on a gun to make. The method of manufacture influences cost, whether it's cut, buttoned or cold hammer forged. Then you have the chrome lining which also adds to the cost. A lot of the time, you will also be paying for the brand name obviously.
Fuck Ukraine btw.
>Fuck Ukraine btw
Because it turned this board into complete shit.
Blame Russia you stupid cunt
I don't see Russian shills shitting up the board 24/7.
funny, everyone else did.
well before the invasion.
and after it? quite a few pro ukraine stuff is them too.
Ok Taras. You got anything to say about the actual topic?
is that supposed to matter?
if OP is too much of a pussy to try and fight for his own thread, he deserves to get shit on lol.
weak. you fairies pissing and shitting over the war existing caused just as much drama, and is part of what drove vatniks to be obnoxious pro ukraine cunts to make you tards seethe.
>doesn't have an argument
>too insecure to let the issue lay
>insists on replying to preserve ego and hope he gets something worth talking about
damn what a waste of quads.... would have been great if I was the one that first started whining out of nowhere about the war
>op makes dumb thread outside of /arg/
>entire thread is shat up
>single out the one guy laughing at a crybaby who decided to cry about muh ukraine in an unrelated thread
>Slavmoron gets found out
>Still shits up thread
do you even know what ontological means?
saying "No." with a chad face isn't a good answer.
there is nothing wrong with the meme other than it being misplaced.
>saying "No." with a chad face isn't a good answer.
Wow, what a surprize.
typical slav shitting up the thread
Nothing makes it worth $850, it's more that its a niche style, and so needs different parts that also need different machines to make. Since 5.56/.223 is cheaper than 7.62x39 now, you're better off getting a higher tier upper in 5.56 to last you a long time. Go consult /arg/ for info if they don't call you a poorfag first
Haha fuck you. PrepHole was dead before the war kicked off and now you're mad Russia is getting buttfuckdd for all the world to see hahaha
Proxy wars aren't funny tho. Think about all of our tax money that came out of our pockets without our vote to fund these morons.
>Think about all of our tax money that came out of our pockets without our vote to fund these morons
You do realize that the vast majority of aid that we've given Ukraine is mothballed equipment that would otherwise have to be stored and maintained?
Yeah. Also all the equipment left in the M.E. All that cold, hard cash that has ended up in someone else's pocket than the American people's. You are really convincing me bro...
>All that cold, hard cash
Did you even read what I posted?
>Pallets of cash
Yeah, yeah I heard you.... something something mothballs and maintenance. You are only talking about the equipment.... and weapons....
Where are you getting the "pallets of cash" from?
I didn't get anything from you, bud.
How much money, just money, has gone to Ukraine? Can you answer that?
No, but are you aware of it?
Do you know how many pallets 1 billion dollars in $100 bills is? About 12.
It seems like you're trying to make a point, so just spit it out
>Proxy wars aren't funny tho.
I feel as if my initial statement was enough.
that's probably a big part of the price. Do you really need a heavy barrel? Are you going to be putting 1000 rounds through it at full auto or something?
7.62x39 ar upper, lmfao