FOUR HUNDRED FUCKING DOLLARS?

Anyone know what the frick happened to Larue's pricing?
I was waiting til I got my tax return check from my butthole state treasury to buy a 9" quad rail from that fricking guy.
I got the check in the mail this morning, went to get on the list of people he takes six months to send shit to, and it's nearly fricking DOUBLED in price?
It was literally $230 last fricking week!
Is this revenge for people shitting on his C-Note nonsense?

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 11 months ago
    Anonymous

    you are going to b***h about shortage or high price anyways.

    • 11 months ago
      Anonymous

      Are you unable to read?
      I was literally about to purchase one, but now they're suddenly more expensive than a fricking KAC URX3, so I'm not.

      • 11 months ago
        Anonymous

        we get it, you're poor

        • 11 months ago
          Anonymous

          Yes yes, I am poor.
          Any idea why the they've suddenly doubled in price?
          If I'm going to spent $400 on a rail, as I said, I'm just going to buy a URX 3 instead.

          • 11 months ago
            Anonymous

            I can buy 2 high points for 400 dollars and just attach them to the rail I already have.

      • 11 months ago
        Anonymous

        Are you moronic? LaRue had more customer than they can supply, they can either list it as not available after immediate sold out at a reasonable price so the scalper takes the customer who would pay any price for one, or they take the matter in their own hands and raise the price themselves.
        Every brand that can be gucci will be one.

        • 11 months ago
          Anonymous

          Let's be real here. It's a knock off KAC FF RAS. Chill

        • 11 months ago
          Anonymous

          >the scalper takes the customer who would pay any price for one
          Where the frick are you seeing larue scalpers?
          I have never seen anyone hocking larue anything at a premium.
          You're super well regarded.

  2. 11 months ago
    Anonymous

    Just wait until it goes back down? Assuming it ever does

  3. 11 months ago
    Anonymous

    I'm wondering if the listing is messed up. All the handguards are listed as $399.99.

    • 11 months ago
      Anonymous

      I'm not sure. The pricing for the complete uppers is also up something like $500.

      • 11 months ago
        Anonymous

        https://i.imgur.com/huoUrXw.jpg

        LAT and SAT discontinued too, fricking RIP M-LOK and especially those morons who love slick-a-tinnies
        Frick larue and mark. Only reason why they became what they are is because they wouldn't gaped the consumer but now they want to charge extravagant prices?
        FRICK THEM. LET THEM BOOMERS ROT AND DIE OF CANCER!

        LaRue singlehandedly killing their own business overnight. I see that virtually everything on their website has close to doubled in price, barrels, uppers, mounts, basically anything that isn't the MBT. Rip LaRue, guess I'm never buying anything from them going forth.

        • 11 months ago
          Anonymous

          but the dillo dust anon, you need to get the dillo dust

          just go noveske and skip paying for only okay stuff

  4. 11 months ago
    Anonymous

    >$400
    wtf Mark, nobody is ever going to buy your rail at that price.

  5. 11 months ago
    Anonymous

    Why buy that shitty out of date boomer rail?
    If you're going for quad, do RIS II.
    Even Bendy Bill or RIS III are gud to go.

    • 11 months ago
      Anonymous

      >Bendy Bill

      Get a geiselle then, it’s the same price.

      I have a G quad rail.
      It's fricking bent, and it's not even a blem.
      Or rather, I should say that the hole for the barrel nut was turned out of round slightly on the lathe or something, so the front of the rail is angled higher than the rear of the rail.
      No thanks, I'm done with their shit.

      Aside from that I wanted a Larue rail because they're actually really fricking good, but they're also not 400 beans good.
      I'm just wondering what the frick happened.

      • 11 months ago
        Anonymous

        >It's fricking bent, and it's not even a blem.
        >Or rather, I should say that the hole for the barrel nut was turned out of round slightly on the lathe or something, so the front of the rail is angled higher than the rear of the rail.
        You know, pick up the phone and call their CS. Or email them with pictures.
        This is some BS reason when you haven't given a chance to fix it. If they screw you, then you can rage.
        Buy DD then.
        For $399 you can buy a legit KAC FF RAS instead of the knock off
        https://www.whiteknightsupply.com/products/kac-556-free-float-ras-carbine
        Not sure if actually in stock though lol. Prob not.

  6. 11 months ago
    Anonymous

    Get a geiselle then, it’s the same price.

    • 11 months ago
      Anonymous

      OP is frugal, so he should buy the blems and paint it.
      https://geissele.com/rifle-parts/upper-parts/super-modular-rails.html

  7. 11 months ago
    Anonymous

    LAT and SAT discontinued too, fricking RIP M-LOK and especially those morons who love slick-a-tinnies
    Frick larue and mark. Only reason why they became what they are is because they wouldn't gaped the consumer but now they want to charge extravagant prices?
    FRICK THEM. LET THEM BOOMERS ROT AND DIE OF CANCER!

  8. 11 months ago
    Anonymous

    Most of these over priced stores are excusses to have manufacturing licenses. No really interest to move product.

  9. 11 months ago
    Anonymous

    Stop being poor.

    • 11 months ago
      Anonymous

      moron

  10. 11 months ago
    Anonymous

    Get shit on kid. Frick you and frick your memes.

    • 11 months ago
      Anonymous

      >frick your memes.
      What does this mean? Go back to rddit, clown shoes.

      >It's fricking bent, and it's not even a blem.
      >Or rather, I should say that the hole for the barrel nut was turned out of round slightly on the lathe or something, so the front of the rail is angled higher than the rear of the rail.
      You know, pick up the phone and call their CS. Or email them with pictures.
      This is some BS reason when you haven't given a chance to fix it. If they screw you, then you can rage.
      Buy DD then.
      For $399 you can buy a legit KAC FF RAS instead of the knock off
      https://www.whiteknightsupply.com/products/kac-556-free-float-ras-carbine
      Not sure if actually in stock though lol. Prob not.

      >pick up the phone and call their CS
      It's discontinued now. Plus, it's the PERFECT shade of FDE or DDC or whatever - 99% of their tanodized looks sort of like someone mixed goose shit in with it and it's intolerable.
      I can't send it back, I'd never get another, so I sit here and get upset about it instead.
      Really it just means I needed to pull the front sight post out of my BUIS and put it in the mill vice to cut half of it off so I could achieve zero.
      >For $399 you can buy a legit KAC FF RAS instead of the knock off
      OP Parts has them in stock apparently, along with the URX3 for like 388.
      I'm honestly probably going to go with the URX3, I just wanted the 9" Larue, it's going on an older 10" FN CHF 300blk barrel and it would have been perfectly spaced.

      https://i.imgur.com/3qSXDNv.jpg

      Shouldn't you be mad at Hop for making fun of Mark?

      I can't be mad at Hop, he's scary. What if the army of towering, butch lesbian aunt clones he commands comes online and makes way for my current location? I don't think I can hold them off on my own.

      • 11 months ago
        Anonymous

        >What if the army of towering, butch lesbian aunt clones he commands comes online and makes way for my current location?
        They can't because they aren't re

  11. 11 months ago
    Anonymous

    Shouldn't you be mad at Hop for making fun of Mark?

    • 11 months ago
      Anonymous

      >Shouldn't you be mad at Hop for making fun of Mark?
      I was going to joke that Hopp caused an influx of LaRue sales since he said they were the best for their price, but it might be true. There's only like what, 200 handguards in stock? Firearms aren't just things people mass produces parts for in the tens of thousands.

    • 11 months ago
      Anonymous

      Did someone make a Hop Waifu?

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *