Device pic related, I wanna use a power supply to power it. Specs of the power supply:. Input: 100-240V ~ 50/60Hz 1.2A max

Device pic related, I wanna use a power supply to power it

Specs of the power supply:
Input: 100-240V ~ 50/60Hz 1.2A max
Output: 40W 12V === 3.33A

Would this work?

  1. 2 weeks ago
    F360 dev

    what does it say you need right there on the fucking package you illiterate cock sucking gay gay?

    • 2 weeks ago
      Anonymous

      i have 0 understanding of those things

    • 2 weeks ago
      Anonymous

      should it work or nah

      • 2 weeks ago
        Anonymous

        Yes it will work

      • 2 weeks ago
        Anonymous

        It will only draw max of 2 amps

        • 2 weeks ago
          Anonymous

          Don't think of the power supply as an electricity pump pushing current into the device, it's more like the device is a vacuum that sucks current from the supply. In which case it's fine if the supply is capable of putting out more amps than the device uses, it's just unused overhead.

          Things you don't want:
          1 - A supply that puts out more voltage or less voltage than the device is rated for
          2 - A supply that can't put out the max amps the device can pull.
          3 - A supply of the wrong type of power, like trying to run an AC device with a DC supply, or vice-versa. But hopefully that's common sense.

          The supply you specified falls withing the devices voltage range and is capable of putting out more amps than the device is rated to draw so you should be ok.

          I tried that supply but it never worked

          now I used this supply (picrel)
          worked for 20 mins and now for some reason it doesn't
          it doesn't power the device anymore, no LED lights etc
          sry I don't know anything about electricity
          help ;-;

          • 2 weeks ago
            Anonymous

            I think more than 2A might've been too much for it, internal battery is kind of small

            • 2 weeks ago
              Anonymous

              did I actually kill it? @[email protected]
              what power supply should I get
              like what volt/ampere ranges
              pls tell me this is actually important

              • 2 weeks ago
                Anonymous

                Are you actually retarded? It says what power supply it uses right on the damn thing. Something between 10-40v, 2a

              • 2 weeks ago
                Anonymous

                whacha gonna do about it white boy

  2. 2 weeks ago
    Anonymous

    Don't think of the power supply as an electricity pump pushing current into the device, it's more like the device is a vacuum that sucks current from the supply. In which case it's fine if the supply is capable of putting out more amps than the device uses, it's just unused overhead.

    Things you don't want:
    1 - A supply that puts out more voltage or less voltage than the device is rated for
    2 - A supply that can't put out the max amps the device can pull.
    3 - A supply of the wrong type of power, like trying to run an AC device with a DC supply, or vice-versa. But hopefully that's common sense.

    The supply you specified falls withing the devices voltage range and is capable of putting out more amps than the device is rated to draw so you should be ok.

Your email address will not be published. Required fields are marked *