It doesn not dry out under a few months. What you see is a liquid flowing towards gravity but the amount it leaves and the white you see is more than needed to lubricate. In the first place you shouldnt wvwn see white when apply it because it means you added way to much. You can use a fine&cheap art brush to spread it over parts, all you should see is wet/oily steel without white color.
It doesn not dry out under a few months. What you see is a liquid flowing towards gravity but the amount it leaves and the white you see is more than needed to lubricate. In the first place you shouldnt wvwn see white when apply it because it means you added way to much. You can use a fine&cheap art brush to spread it over parts, all you should see is wet/oily steel without white color.
I use a little brush that came with an electric shaver
I've found that it works great on everything from handguns, rifles, and pocketknife pivots
I repaired 60year old locks with it and garten tools, but i need a fricking leaflet inside the box so everyone gets examples how much to use ;_; i mean its not grease... and powders are not liquid, they do not give a frick if its time to lube up steel, copper, zinc or alu tbh
i use a soft bristle tooth brush to smooth the oil out on my guns, and a hard bristle one for cleaning
walmart sells 10 packs of tooth brushes for like 2 or 3 dollars, grab some
Nothing if the bottle was used within the last week and when its getting a bit more air its also getting faster. 50ml and only a small amount of air is shit for shaking
I'm going to creampie my guns every time anon and you can't stop me
Its fine Anon, we need fresh guns anyways
https://i.imgur.com/bhguVeo.png
>want to support the resident burgeoning small business chemist autist >but he's a g*rman
I have a big surprice for the EUceld this summer 🙂
Also check out moka raifus on google, that dude is also a kommando
Moka's raifus or waiting till i got it back into Amazon this spring. At the end it depends on our friend Korbo tbh.
Korbo should send out the next wave next week, god bless this bussy kommando
Ah yes the semi-weekly tripgay snake oil fake oil shilling thread. I can't wait until someone actually does analysis on this and finds out it's just repackaged shit out of an industrial lubricants catalog or something equally hilarious.
>abrasive
you guy are moronic, but on that note,
https://i.imgur.com/Tr3Zfn4.jpg
>Coom than CLP and Ballistol
That water spray test is running since 27th Dec 2022 and CLP has less demage now than Ballistol within 24h.But both of them got the 1st rust after only 5-6h.
Could you tell us what some of the other additives are?
In my oil the rust protection is done with carboxylate, ester oxidat and ca-sulfonat (msds open info anyway). If you ask about CLP, i know that its PAO3 or PAO4 (estimation based on evaporation) and thats the only chem on the msds. I 100% recommend it, more expensive CLPs (also milspec) are just variations with idemtical performance tbh
Ah yes the semi-weekly tripgay snake oil fake oil shilling thread. I can't wait until someone actually does analysis on this and finds out it's just repackaged shit out of an industrial lubricants catalog or something equally hilarious.
Instead of letting the tripgays shit up this board with gay shill threads why don't we have an actual discussion about lubricants. What are you guys using? I use Break-Free CLP for general cleaning and lubrication. Moly EP wheel bearing grease for things that need grease which is pretty much an M1 Garand.
I started to test breakfree CLP (non-aerosol) and Ballistil (non-aerosol) since christmas. Dude, CLP is 100x better than Ballistol. Once i get the aerosol version im using that for cleaning and than Coom on the internals, also CLP is extremly non-toxic in its non-aerosol form. No need to improve that basic product!
Im banned fir shitposting, so i cant use the images but let me make a fresh one
PF test setup was shit, there was not a single test included that gives good information. Maybe the -40°C test when we see all americans as Alaskaanons
How to test? Im still not owning enough chems, labels and boxes to survive the open market to show presents,lol. First i need the gun oil in bulk, than online stores before any youtuber is even worth it. Not easy tbh, time is my and Korbos enemy and a single error also means im not able to bring the winter oils out this year. The problem with testing is that the tests itself are hard to do the right way, pretty much everyone is limited to simple tests and the smallest error cause misleading results... there is a reason why i rather import products and test in 1vs1 than wasting huge amounts of money on limited tests that give me results i already know. A company only shows data the customer can see, doesnt matter if a customer can even evaluate a fricking result without working on oils (most gun smiths also cant read data because its autistic). So you can pic fron shit YT work, faked data from other companies or just blending number within the market that are 100% worthless for your guns. Gun oil isnt a regulated motor oil, thats the reason why working close with customers is important and right now >250Anons could do that and im guving it out pretty much for free soon so we get close to 1000 or all Anons on /k/.
PF test setup was shit, there was not a single test included that gives good information. Maybe the -40°C test when we see all americans as Alaskaanons
As an anon, the angry autistic sperging in these 2 posts has convinced me not to buy your lube.
Good day lubeanon
>Coom than CLP and Ballistol
That water spray test is running since 27th Dec 2022 and CLP has less demage now than Ballistol within 24h.But both of them got the 1st rust after only 5-6h.
Im adding it this spring. Its a shared market on amazon with the USA so its easy to setup. I want the winter oils on amazon also in Canada, that would be stupid nice ;_:
Also where are the guys with the furey sticker 😀
I've been using my bottle for the last year at work. it seems to work well enough and I think it's funny imagining people taking their guns home and finding my cum (oil) inside them.
Lubeanon I use a 50-50 mix of ballistol and tap water to wash my guns after using black powder or corrosive ammunition. Would you lube have any properties that would make it a suitable replacement.
Coom hates water like hell, you cant just mix in water and use it for cleaning,lol. But you could try out that water based rust protection liquid from cnc machines and metall saws
I've been using my bottle for the last year at work. it seems to work well enough and I think it's funny imagining people taking their guns home and finding my cum (oil) inside them.
Lol snake oil.
Duh. That's because it was made by a noguns that refuses to send it for any applicable testing.
I like it but it seems to dry up and leave a white film on my internals.. that normal? Is it still effective like that?
It doesn not dry out under a few months. What you see is a liquid flowing towards gravity but the amount it leaves and the white you see is more than needed to lubricate. In the first place you shouldnt wvwn see white when apply it because it means you added way to much. You can use a fine&cheap art brush to spread it over parts, all you should see is wet/oily steel without white color.
I use a little brush that came with an electric shaver
I've found that it works great on everything from handguns, rifles, and pocketknife pivots
I repaired 60year old locks with it and garten tools, but i need a fricking leaflet inside the box so everyone gets examples how much to use ;_; i mean its not grease... and powders are not liquid, they do not give a frick if its time to lube up steel, copper, zinc or alu tbh
I'm going to creampie my guns every time anon and you can't stop me
i use a soft bristle tooth brush to smooth the oil out on my guns, and a hard bristle one for cleaning
walmart sells 10 packs of tooth brushes for like 2 or 3 dollars, grab some
White means you overdid it, but too much doesn't really hurt either think.
>shake 7 seconds
what if i only shake it 3 or 4 seconds
Nothing if the bottle was used within the last week and when its getting a bit more air its also getting faster. 50ml and only a small amount of air is shit for shaking
Its fine Anon, we need fresh guns anyways
I have a big surprice for the EUceld this summer 🙂
Also check out moka raifus on google, that dude is also a kommando
What's the way to buy right now
Moka's raifus or waiting till i got it back into Amazon this spring. At the end it depends on our friend Korbo tbh.
Korbo should send out the next wave next week, god bless this bussy kommando
>god bless this bussy kommando
>bussy kommando
>bussy
>kommando
Lubeanon, I...
>want to support the resident burgeoning small business chemist autist
>but he's a g*rman
he's a german in name only, support a known good in a sea of bad
it's abrasive snake oil. hard pass
>abrasive
you guy are moronic, but on that note,
Could you tell us what some of the other additives are?
In my oil the rust protection is done with carboxylate, ester oxidat and ca-sulfonat (msds open info anyway). If you ask about CLP, i know that its PAO3 or PAO4 (estimation based on evaporation) and thats the only chem on the msds. I 100% recommend it, more expensive CLPs (also milspec) are just variations with idemtical performance tbh
>he's a german in name only
Whut?
Don't listen to crummy, he's still a bit miffed because the German Shepherd refused to mount him.
>German Shepherd refused to mount him.
As long as it was consentual dont really care.
I use pic related for my gun if you catch my drift
Ah yes the semi-weekly tripgay snake oil fake oil shilling thread. I can't wait until someone actually does analysis on this and finds out it's just repackaged shit out of an industrial lubricants catalog or something equally hilarious.
Instead of letting the tripgays shit up this board with gay shill threads why don't we have an actual discussion about lubricants. What are you guys using? I use Break-Free CLP for general cleaning and lubrication. Moly EP wheel bearing grease for things that need grease which is pretty much an M1 Garand.
You sound gay and moronic.
Of course I'm gay and moronic this is PrepHole. What else did you expect?
I started to test breakfree CLP (non-aerosol) and Ballistil (non-aerosol) since christmas. Dude, CLP is 100x better than Ballistol. Once i get the aerosol version im using that for cleaning and than Coom on the internals, also CLP is extremly non-toxic in its non-aerosol form. No need to improve that basic product!
Im banned fir shitposting, so i cant use the images but let me make a fresh one
I use clenzoil, it smells nice :). Also scored highest on project farm tests.
PF test setup was shit, there was not a single test included that gives good information. Maybe the -40°C test when we see all americans as Alaskaanons
Your snake oil has never been tested.
but he literally tests it you moron
and he posts the results here
lubeanon I want to like you and yes PF test wasn't that good but plz get someone to test your shit vs other things.
How to test? Im still not owning enough chems, labels and boxes to survive the open market to show presents,lol. First i need the gun oil in bulk, than online stores before any youtuber is even worth it. Not easy tbh, time is my and Korbos enemy and a single error also means im not able to bring the winter oils out this year. The problem with testing is that the tests itself are hard to do the right way, pretty much everyone is limited to simple tests and the smallest error cause misleading results... there is a reason why i rather import products and test in 1vs1 than wasting huge amounts of money on limited tests that give me results i already know. A company only shows data the customer can see, doesnt matter if a customer can even evaluate a fricking result without working on oils (most gun smiths also cant read data because its autistic). So you can pic fron shit YT work, faked data from other companies or just blending number within the market that are 100% worthless for your guns. Gun oil isnt a regulated motor oil, thats the reason why working close with customers is important and right now >250Anons could do that and im guving it out pretty much for free soon so we get close to 1000 or all Anons on /k/.
As an anon, the angry autistic sperging in these 2 posts has convinced me not to buy your lube.
Good day lubeanon
>Coom than CLP and Ballistol
That water spray test is running since 27th Dec 2022 and CLP has less demage now than Ballistol within 24h.But both of them got the 1st rust after only 5-6h.
Is it back? Gib link or search keyword I need another bottle.
i use the coom lube
me too
I don't but I will eventually.
Lubeanon it's 2023 and I still don't have any in Canada.
Im adding it this spring. Its a shared market on amazon with the USA so its easy to setup. I want the winter oils on amazon also in Canada, that would be stupid nice ;_:
Also where are the guys with the furey sticker 😀
I've been using my bottle for the last year at work. it seems to work well enough and I think it's funny imagining people taking their guns home and finding my cum (oil) inside them.
Lubeanon I use a 50-50 mix of ballistol and tap water to wash my guns after using black powder or corrosive ammunition. Would you lube have any properties that would make it a suitable replacement.
Coom hates water like hell, you cant just mix in water and use it for cleaning,lol. But you could try out that water based rust protection liquid from cnc machines and metall saws
Adding a cucking service to the price 🙂
what would actually happen if you lubed your gun with semen?
Maybe rust inside the gun, depends how air tight the inside is to keep humidity inside
I like it.
In 2 months i send something new to the kraut boys 😉
Sweet pistol
Ballistol, Clenzoil, Renaissance wax. No rust in more than a decade. Simple as.