comp too flashy/loud

I was shooting my 14.5 pin and weld at the range and it seems a little loud and rowdy. It doesn't have much recoil but it was pretty crazy even during the day time. Is this a tactical disadvantage? It's the BCM comp mod 1

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 11 months ago
    Anonymous

    Shortish barrel comp not flash hider what the frick did you expect?

    Yo dawg my drako be blasting fireballs and sheit.

    • 11 months ago
      Anonymous

      some dude on arg said it was good when I was ordering my upper like 2 years ago

      • 11 months ago
        Anonymous

        Gotta chase that meta, bro.
        Don't get a 20 inch barrel like a dumb boomer. It will get you killed.

      • 11 months ago
        Anonymous

        >listening to arg

      • 11 months ago
        Anonymous

        BCM brakes are so awful they phased them out of the 16" mid length uppers. Yours is pinned and welded on, but I think you can still remove it without damaging the muzzle thread— though you might have to destroy the brake

        https://i.imgur.com/V7rIcCo.jpg

        Surefire warcomp is a compensator AND a flash hider bro

        >2.7" prongs negate 1.5" NFA workaround
        >14.5" barrel still awful for suppressor host
        Apart from looking cool, WTF was the point

        >Similar if not better recoil reduction compared to BCM Mod 1
        >Significantly better flash hiding ability than A2
        >NOOOOO BUT WHAT ABOUT MY 2 DB REDUCTION ON MY DEDICATED SUPPRESSOR BUILD
        >just don’t use it as a dedicated suppressor host homosexual
        Surefire Warcomp chads just can’t stop winning

        >invoking recoil on a .223 bore
        lol
        >Significantly better flash hiding ability than A2
        lmao enjoy your EEEEE sharp tuning fork

        https://i.imgur.com/uk5kXcp.jpg

        I hate the Warcomp so fricking much, I don't even know why they bothered putting the labyrinth seal on since it's so fricking awful with a suppressor.

        SFMB thug life.

        >Gov't Profile
        Interesting decision

        • 11 months ago
          Anonymous

          >.223 has no recoil!!!!
          >full auto on .223 is useless because it has too much recoil!!!!
          Which one the frick is it? Inb4 “you don’t have full auto”, you can press the trigger fast, do you think you will be able to get faster and more accurate follow shots at the same range with less recoil or more?

          >REEEEEE
          Literally never heard it during live firing. I wouldn’t give much of frick even if I did.

          • 11 months ago
            Anonymous

            >full auto on .223 is useless because it has too much recoil!!!!
            The problem is muzzle rize, notice there aren't brakes/compensators on machine guns? That's because their weight mitigates the recoil— if your meme fork is keeping the muzzle leveler, it's because of all its weight ahead of the crown

            >Gov't Profile
            Nope, medium.

            Oh— well... the profile is still pointless. Barrel profile is no substitute for quality steel and cartridges

            • 11 months ago
              MilSurpDude

              I shoot suppressed, the extra weight and rigidity goes a long way.

            • 11 months ago
              Anonymous

              >He thinks people use comps on 5.56 for felt recoil and not muzzle rise lmao
              >He thinks a Surefire Warcomp doesn’t reduce muzzle rise
              Newsflash homosexual, the recoil reduction on the Warcomp results in a massive reduction in muzzle rise.
              >all its weight ahead of the crown
              Black person you are not going to halve the muzzle movement on an 8+ lb AR by adding a device that weighs less than 2 ounces more than an A2 at the end of the barrel, that is not why the Warcomp reduces recoil.

            • 11 months ago
              Anonymous

              >Oh— well... the profile is still pointless. Barrel profile is no substitute for quality steel and cartridges
              Are you some kind of moron? A heavier barrel profile given the same “quality steel and cartridges” will still reduce heat dispersion and increase stiffness.

        • 11 months ago
          MilSurpDude

          >Gov't Profile
          Nope, medium.

  2. 11 months ago
    Anonymous

    Surefire warcomp is a compensator AND a flash hider bro

    • 11 months ago
      Anonymous

      >warcomp
      kys

    • 11 months ago
      Anonymous

      >Similar if not better recoil reduction compared to BCM Mod 1
      >Significantly better flash hiding ability than A2
      >NOOOOO BUT WHAT ABOUT MY 2 DB REDUCTION ON MY DEDICATED SUPPRESSOR BUILD
      >just don’t use it as a dedicated suppressor host homosexual
      Surefire Warcomp chads just can’t stop winning

    • 11 months ago
      Anonymous

      Does it go *ping* when you shoot through it?

    • 11 months ago
      MilSurpDude

      I hate the Warcomp so fricking much, I don't even know why they bothered putting the labyrinth seal on since it's so fricking awful with a suppressor.

      SFMB thug life.

  3. 11 months ago
    Anonymous

    Yes, it's extremely visible at night and will be even brighter against someone with NVGs.

  4. 11 months ago
    Anonymous

    I have that comp as well, I usually wear ear plugs + Sordins.

    If the flash bothers you get the Surefire 3 prongs https://www.surefire.com/products/suppressors-division/muzzle-devices/3p-eliminator/

    • 11 months ago
      Anonymous

      It's pinned and welded.

      The flash doesn't bother me but I haven't shot at night

  5. 11 months ago
    Anonymous

    A2 flashider ain't exactly cutting edge, but it does what it says on the tin.

  6. 11 months ago
    Anonymous

    If it's pinned then you're fricked without spending more money to fix it. Just sell the upper and get a new one.

  7. 11 months ago
    Anonymous

    I hated that muzzle device. I sent my upper to retro arms works to get a surefire flash hider put on.

    • 11 months ago
      Anonymous

      How much does that cost?

  8. 11 months ago
    Anonymous

    Or, you could just have better earpro and learn to love the fireball, like a fellow cavegrug
    >T. laughs at people shocked indoor range noise levels with only pistols

  9. 11 months ago
    Anonymous

    pinning and welding a flash hider is just moron tier. unless you just already had a 14.5, a 16 is already plenty short and let's you mount whatever you want without ruining your barrel.

  10. 11 months ago
    Anonymous

    So is the bcm comp/surefire comp worth it over the a2?

    • 11 months ago
      Anonymous

      >BCM comp worth it over the A2
      Not really tbh. You'll get a slight reduction in muzzle rise, but not 1/10th of the muzzle rise. It also has no advantage over the A2 as a suppressor host for those few cans that mount to the A2 device
      >Surefire comp worth it over the A2
      Yes, IF you're going to get a surefire suppressor (you should, unless you can find/afford KAC)
      But I'm just a random on the internet. If the BCM logo is worth an extra $90 and increased muzzle flash to you, go for it

      • 11 months ago
        Anonymous

        Even with the surefire can, I'd recommend their flash hider over their comp

      • 11 months ago
        Anonymous

        So what's the best one if I'm not planning for a suppressor?

        • 11 months ago
          Anonymous

          Close tine flash hider
          https://www.surefire.com/products/suppressors-division/muzzle-devices/sfct-556-1-2-28-closed-tine-flash-hider/
          2.3" long for 13.7" larperators

        • 11 months ago
          Anonymous

          Should've just stuck with the A2 birdcage

          • 11 months ago
            Anonymous

            So what's the best one if I'm not planning for a suppressor?

            Basically that. The A2 is really good at flash reduction and not bad at compensating for muzzle rise, while it only costs $10
            If you're dead set on a p&w 14.5, BCM does make an A2X I think it's called which brings you up to the legal lengths

    • 11 months ago
      Anonymous

      >BCM Comp
      No

      >Surefire Brake
      Yes for a dedicated suppressor host
      No if you don’t shoot suppressed at all unless you’re just fricking around

      >Surefire Warcomp
      Yes for unsuppressed shooting
      Not ideal for full time suppressor use, that capability is just there so you can slap a can on in a pinch and then QD it once you don’t require it

      Surefire 3P if you switch regularly between suppressed and unsuppressed

      JP FH (or White Sound Defense FOSSA but it seems you can’t fricking find them anymore) if you primarily shoot unsuppressed but would rather have less flash than the recoil mitigation effects of the Warcomp.

      Unless you have a need for a non-Surefire suppressor, the above muzzle devices will suit you well as alternatives/upgrades to the A2 depending on your situation and application.

  11. 11 months ago
    Anonymous

    bcm muzzle devices are maybe the worst in the industry. you will have to go to a smith to remove it and p&w a new one. you can dremel it off yourself if you are confident you wont frick up your barrel

    • 11 months ago
      Anonymous

      Why are they so bad

  12. 11 months ago
    Anonymous

    >pin and weld
    >BCM comp
    Just frick my shit up senpai'

  13. 11 months ago
    Anonymous

    What's the difference between the warcomp and 3 tine they look the same

    • 11 months ago
      Anonymous

      The Warcomp is vented behind the prongs

  14. 11 months ago
    Anonymous

    >pin and weld

  15. 11 months ago
    Anonymous

    A2 is poorgay cope

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *