Neither would,nor will,kill you.
23yrs British Army (SA80) and no injuries sustained,nevermind X2 deployments to the ‘obvious places’ and countless TRG EX’s.
Grow up.
If the round is hot enough that it still has enough energy to rip through the chamber, receiver, and stock even after shearing the bolt lugs and blowing off most of its steam through the ejection port and magwell, a conventional layout wouldn't have saved you.
I love having >shitty triggers >non-adjustable LOP >no aftermarket >paying twice what a mid-upper end AR-15 costs
all so I can say my gun was made by yids
Special forces of different nations tend to converge on using whatever the US is using not for any property of the guns, but because they get to train with US special forces who use ARs. Using a common platform when training together is infinitely more important than any differences between any modern military rifles. If you don't get to train with those people, it doesn't matter.
More accurate than me shooting standing offhand or prone with the bipod set up on uneven ground. I've never shot it benchrest so I don't really know what the mechanical limitations are. But I know I have done better than 4" at 200 yards with it one of the few times I shot it at a normal flat range so I can say mine is definitely better than 4moa.
I think bullpups look really cool but I'm not sure they're good enough to be worth taking over regular arms - however it is a shame that all the late cold war/early C21 bullpups have mostly gone away now in favour of basically the same gun.
broke: >let's design a rifle with bad trigger, bad ergo, and awkward takedown to shorten it up for clearing buildings
woke: >let's just take a normal rifle and slightly shortern the barrel for improved mobility
bespoke: >Clearing buildings? Drop some WP in it and kill anyone who comes out.
i dont understand the trigger hate, theyre not perfect but theyre entirely usable not bad >awkward takedown to shorten it up for clearing buildings
what does this mean
Clearly pushing out two captive pins with a bullet tip and pulling the bolt out the back on my MDR is far too difficult a takedown. Or pushing out one captive pin with my fingertip and pulling the bolt out the back on my VHS.
And some conventional rifles have abhorrent takedown procedures. While others are great. Just like bullpups. Almost as if the configuration has very little to do with ease of disassembly.
There's the K&M M17S308 if you're worried about Desert Tech's QC. It's a somewhat older design, but it's been modernized.
1 year ago
Anonymous
Would you consider a kel tek rfb? If not why so? Looks like an okay bullpub to me. I know plenty of guys mistrust kel tek due to their style of building guns in simple plastic clampshell designs. Yet most of their designs that are out of their trial phase kick ass in my opinion.
At the very least they should be supported because they at least try to innovate in my opinion
1 year ago
Anonymous
i dont have much of an opinion on keltec, but ill give it a look
Every one of those losers look like they have anal beads up to their stomach, which is probably pretty accurate, considering they work for ZOG.
that gangster lean
whats wrong with anal beads? there are a lot of tactical advantages
vatnik's law. Please stop thinking about men's buttholes.
Da cumrade da
I love resting my facial bones next to the rifles chamber so a extra hot round or squib load can kill me for buying a bullpup.
Use better ammo, not bubbas pissin hot loads or flavor of the month remans
Neither would,nor will,kill you.
23yrs British Army (SA80) and no injuries sustained,nevermind X2 deployments to the ‘obvious places’ and countless TRG EX’s.
Grow up.
If the round is hot enough that it still has enough energy to rip through the chamber, receiver, and stock even after shearing the bolt lugs and blowing off most of its steam through the ejection port and magwell, a conventional layout wouldn't have saved you.
Ay dios mio! Las goblinos!!!
best bullpup
I love having
>shitty triggers
>non-adjustable LOP
>no aftermarket
>paying twice what a mid-upper end AR-15 costs
all so I can say my gun was made by yids
Yea I tried a Bullpup once and I was fricking shocked at the LOP.
You CAN'T SPEED RELOAD or COMBAT TRANSITION or BAYONET CHARGE with bullpup
Really??!!?
>or BAYONET CHARGE with bullpup
>https://en.wikipedia.org/wiki/Battle_of_Danny_Boy
Bongs did it.
They are so good that most EU soldiers prefer to us AR(assault rifle)-15 line than their shitty bullpup.
Special forces of different nations tend to converge on using whatever the US is using not for any property of the guns, but because they get to train with US special forces who use ARs. Using a common platform when training together is infinitely more important than any differences between any modern military rifles. If you don't get to train with those people, it doesn't matter.
Frick you I'm left handed. You're missing out on 1 in 10 wildcards to have your back.
I like my bullpups
is that a mdrx? how is it? its the only .308 rifle im really looking at
It is, and I love it, but mine is in 5.56. No idea how the .308 behaves.
gotcha, how accurate is yours? ive heard a lot of back and forth from 1.5moa all the way to 4
More accurate than me shooting standing offhand or prone with the bipod set up on uneven ground. I've never shot it benchrest so I don't really know what the mechanical limitations are. But I know I have done better than 4" at 200 yards with it one of the few times I shot it at a normal flat range so I can say mine is definitely better than 4moa.
thanks anon
I think bullpups look really cool but I'm not sure they're good enough to be worth taking over regular arms - however it is a shame that all the late cold war/early C21 bullpups have mostly gone away now in favour of basically the same gun.
broke:
>let's design a rifle with bad trigger, bad ergo, and awkward takedown to shorten it up for clearing buildings
woke:
>let's just take a normal rifle and slightly shortern the barrel for improved mobility
bespoke:
>Clearing buildings? Drop some WP in it and kill anyone who comes out.
i dont understand the trigger hate, theyre not perfect but theyre entirely usable not bad
>awkward takedown to shorten it up for clearing buildings
what does this mean
Clearly pushing out two captive pins with a bullet tip and pulling the bolt out the back on my MDR is far too difficult a takedown. Or pushing out one captive pin with my fingertip and pulling the bolt out the back on my VHS.
aug/ps90 takedown is ridiculously easy as well
And some conventional rifles have abhorrent takedown procedures. While others are great. Just like bullpups. Almost as if the configuration has very little to do with ease of disassembly.
ill be happy when i get a real .308 bullpup.
There's the K&M M17S308 if you're worried about Desert Tech's QC. It's a somewhat older design, but it's been modernized.
Would you consider a kel tek rfb? If not why so? Looks like an okay bullpub to me. I know plenty of guys mistrust kel tek due to their style of building guns in simple plastic clampshell designs. Yet most of their designs that are out of their trial phase kick ass in my opinion.
At the very least they should be supported because they at least try to innovate in my opinion
i dont have much of an opinion on keltec, but ill give it a look
tavor 7
not accurate enough
"It's not as nice-feeling as the trigger you'd expect on an AR of the same price, therefore it's bad"
They're meh.
guys who like bullpups are the same kind of gays that compliment another man for having a "tight" ass
Talk me out of it