>be at Machine gun shoot. >tens of millions of dollars worth of equipment

>be at Machine gun shoot
>tens of millions of dollars worth of equipment
>many items one of a kind and priceless
>lubricating with WD-40

why.

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 2 years ago
    Anonymous

    it's a machine gun

    • 2 years ago
      Anonymous

      Hehehe, okei

  2. 2 years ago
    Anonymous

    also related and a similar thinking condition.

    • 2 years ago
      Anonymous

      It's he talking about his shitty French collection with little to no new manufacture of said French calibers?

  3. 2 years ago
    Anonymous

    Spent all their money on the ammo.

  4. 2 years ago
    Anonymous

    Engine oil and axle grease were recommended when these guns were in service, hell slap some crisco on it if you want, the guns don't care.

    • 2 years ago
      Anonymous

      That's great and all but wd40 isn't a lubricant

      • 2 years ago
        Anonymous

        It is though, just doesn't last, so you have to keep up with it. Which is fine because it's cheap and plentiful.

        • 2 years ago
          Anonymous

          It actually is, just don't rely on it regularly

          Any liquid will lubricate a mechanism somewhat until it dries or evaporates. That doesn't mean you use any liquid. Oil or grease of some kind should be used.
          You can use wd40 to clean your guns. and I thought this was common knowledge but apparently /k/ is dumber than I expected

          • 2 years ago
            Anonymous

            It's just a thin lube, is it optimal? No but it comes in an aerosol spray so you can blast nooks and crannies on sloppy old shit that's been around for a century.

            • 2 years ago
              Anonymous

              It's not a matter of being optimal. It's literally the wrong tool for the job.

              • 2 years ago
                Anonymous

                >It's just a thin lube, is it optimal?
                Thin lubes have short CH-chains which cause extrem high evaporation which means its flashing of from hot steel like alcohol. Thats the main problem with WD40. Its also free from EP/AW so a motor oil is 100x better on that guns. They have good AW,some EP but the oil is heavy and minimum god enouth to pass car needed test

                It comes in spray form for free and is around farm/workshops by the case so it's easy to toss in the box before you go to the range. Would a spray bottle full of motor oil be better? Sure, that's extra steps though.

            • 2 years ago
              Lubeanon

              >It's just a thin lube, is it optimal?
              Thin lubes have short CH-chains which cause extrem high evaporation which means its flashing of from hot steel like alcohol. Thats the main problem with WD40. Its also free from EP/AW so a motor oil is 100x better on that guns. They have good AW,some EP but the oil is heavy and minimum god enouth to pass car needed test

          • 2 years ago
            Anonymous

            >You can use wd40 to clean your guns
            boomer

        • 2 years ago
          Anonymous

          >It is though

          It actually is, just don't rely on it regularly

          >It actually is

          protip: it isn't

          • 2 years ago
            Anonymous

            >contains: light mineral lubricants
            Oh my
            Don't akshually me either.

            • 2 years ago
              Anonymous

              still not a lubricant, get fricked

              • 2 years ago
                Anonymous

                >akshually mineral oil isn't a lubricant
                /k/ surprises me every day.

          • 2 years ago
            Anonymous

            This. It fricking isn't. It was designed to displace water from steel aerospace systems to prevent rusting.

      • 2 years ago
        Anonymous

        It actually is, just don't rely on it regularly

  5. 2 years ago
    Anonymous

    For the lulz of course

  6. 2 years ago
    Anonymous

    I literally clean my guns with brake cleaner and water, then I lube with grease or what ever motor oil I have on hand

  7. 2 years ago
    Anonymous

    If it's stupid and it works it's not stupid

    • 2 years ago
      Anonymous
  8. 2 years ago
    Anonymous

    It just werks

  9. 2 years ago
    Anonymous

    >get cheap engine oil
    >pour it in a spray bottle
    >10,000% better than WD-40
    Black folk using penetrating fluid in place of a heavy duty lubricant make me ANGERY.

  10. 2 years ago
    Anonymous

    If it works, it works. Ma Deuce ain’t gonna b***h about it.

  11. 2 years ago
    Anonymous

    because it works

  12. 2 years ago
    Anonymous

    some people just have more money than sense.
    I met a guy with a tricked out precision rifle at the range. besides being a terrible shot, his bolt was also terribly gritty. I asked him what he used for lubrication and he replied he never added any lube beyond what it came with from the factory. with his permission I put a thin coat of lithium grease on it and he was astonished how smooth it suddenly was.

  13. 2 years ago
    Anonymous

    Hoppes 9 solvent is also a lubricant and what I use mixed with motor oil

    • 2 years ago
      Anonymous

      Hoppes is made specifically for firearms, clenzoil is the superior of superior lubricants for your little buddy.

  14. 2 years ago
    Anonymous

    Should you use WD-40 as a lubricant?
    While WD-40 does have some lubricating properties, it is not a good lubricant and should not be used for this purpose. Using it on anything that needs proper lubrication (bike chains, treadmills, garage doors, firearms etc.) will not give you the results you want.

    The main reason for this is that only a fraction of WD-40 is made up of lubricants. And these are only light mineral lubricants, unsuitable for any serious friction or heat. Machine guns have lots of very serious friction and heat

    The rest of the product is made up of compounds that aid penetration. These also have lubricating properties, but because they are volatile compounds that evaporate over time, their effect does not last.

    On top of that, both the application of WD-40 and its evaporating components dissolve and displace existing lubricants, like lithium grease or graphite.

    It's hard to choose a product that would be worse for firearms. Let alone machine guns.

    • 2 years ago
      Anonymous

      Okay, but does it work?

      • 2 years ago
        Anonymous

        Does pouring salt water on a dirty/gummed up gun work to lubricate it? Well, sure. It might improve cycling temporarily. Maybe free up the action if it's sticky.

        But should you? When there are plenty of much better options for lubricants? No, and you know it.

  15. 2 years ago
    Anonymous

    Spray lubes are very convenient. Liquid or grease requires you to disassemble. Use your head, homosexual.

    • 2 years ago
      Anonymous

      >Spray lubes are very convenient.
      Yes they are. And Machine Guns are very expensive. Why you would use WD40 on them instead of a actual good lube is baffling.

      >Liquid or grease requires you to disassemble.
      I mean, you could use spray on grease, or spray on liquid oil. Field stripping a gun and lubricating it is hardly a hassle.

      >Use your head, homosexual.
      Irony.

      • 2 years ago
        Anonymous

        >noooo you're not min/maxing based on this stats sheet
        >nooo you'll have to spend money later because the super tight tolerances of your 100 year old MGs will be worn down
        Ask them if they care.

        • 2 years ago
          Anonymous

          >you're not min/maxing based on this stats sheet
          Never said anything close to this.

          >you'll have to spend money later because the super tight tolerances of your 100 year old MGs will be worn down
          Never said they had tight tolerances. They'll obviously benefit from good lube. WD40 is shit.

          >Ask them if they care.
          They told me you're a moron.

  16. 2 years ago
    Anonymous

    I went to Knob Creek for many years.
    WD-40 was really really common on the machine gun line. Guys would rip belts out of an M2 or MG42 or 1917 or whatever. When done they'd open the action / top cover / whatever and squirt a little WD-40 in there. Really, really common.
    And it worked.

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *