Ballistic Gel

Serious question, has anyone here ever fricked ballistic gel?

I mean, let's be real, this shit looks like the cross section of an onahole, right? Bit of lube and dick would slide right in, the wound channel would lend some interesting texture, how has this not been done?

You could even compare the wound channels of different calibers and see what the most frickable bullet wound would be, this is like a million dollar idea how has nobody ever thought of this?

250 Piece Survival Gear First Aid Kit

LifeStraw Water Filter for Hiking and Preparedness

250 Piece Survival Gear First Aid Kit

  1. 2 years ago
    Anonymous

    Yes but it's only really works once. Ballistics gel tears really easily, which means you're going to have to cut it in half to clean everything out properly then remelt it into a full block again. Tearing gets worse if you mold it into an onahole-sized cylinder but at least then it's easy to clean and remelt.
    Not impossible but a pain in the ass. Just go on /ona/ and find an actual hole that's worth your time.

    • 2 years ago
      Anonymous

      Wouldn't it be industrially scalable though? Like, fill the wound channel with some sort of resin, then use the mold on a frickable silicon?

      Then you could sell them to /k/ommandos and they can fight

      >Yeah I frick the 9mm JHP, really tight in all the right places

      >Nah man, the 45-70 with the cum reservoir is where it's at

      • 2 years ago
        Anonymous

        Yes and no, a lot of the shape comes from the invisible tears that will separate when a dick comes through, but it can't easily be molded.
        Most onas have fairly open holes and sets of bumps and ridges but even the tightest ones don't have inner cavities like that.

        • 2 years ago
          Anonymous

          >imagine what those lube-filled cavities would do to your dick

          • 2 years ago
            Anonymous

            Not contact it or provide meaningful tightness. Expansion cavities are pretty big dude

  2. 2 years ago
    Anonymous

    Finally, a quality /k thread

  3. 2 years ago
    Anonymous

    deer are free. just go innawoods.

    • 2 years ago
      Anonymous

      Based deerfricker. What a thread that was.

      • 2 years ago
        Anonymous

        Anyone got a screencap?

  4. 2 years ago
    Anonymous

    Way too stiff.

  5. 2 years ago
    Anonymous

    Why? The Japanese make really soft silicone pocket pussies and they're only like $10 on eBay.

    • 2 years ago
      Anonymous

      >$10 ebay onaholes
      >implying you're not getting chink cancerslime pussy with metal shavings and powdered SARS

      • 2 years ago
        Anonymous

        So you'd rather frick ballistics gel contaminated with lead? They're like picrel. They're like $30 now for Chink made ones. The Japanese made ones used to be $10-15 a few years ago.

        • 2 years ago
          Anonymous

          The entire point of the concept is to do a casting of the entry wound and make that into the frickhole. Reading comprehension is important anon.

          • 2 years ago
            Anonymous

            Making a silicone cast is kinda stupid tbh. Why go through all the effort? Might as well buy an onahole then, faster, cheaper and better.

            The whole point of having ballistic gel is that you can make a pocket pussy quick and dirty. Just make sure to to penetrate it all the way through so you can flush out your jizz, nothing kills a boner like two weeks old jizz believe me. You might also want to consider strapping that gel up to make it nice and tight. Squeeze it between your couch pillows to hold it in place, lube that gel up and frick the living shit out of that b***h.

            • 2 years ago
              Anonymous

              >nothing kills a boner like two weeks old jizz
              Forget jizz, there is an anon on /ona/ who didn't clean his hole after multiple faps. After a few weeks he was pulling out actual fricking maggots and an off-brown putrid mix of old lube and rotting sperm. Legit one of the most disgusting things I have ever seen on this site and I am counting rekt/gore webms, everything on /trash/ and /d/, and that one time I saw legit CP.

            • 2 years ago
              Anonymous

              I'm thinking of this from a commercialization aspect. Why stop with just one when you could make a whole line of these things?

              Wouldn't it be industrially scalable though? Like, fill the wound channel with some sort of resin, then use the mold on a frickable silicon?

              Then you could sell them to /k/ommandos and they can fight

              >Yeah I frick the 9mm JHP, really tight in all the right places

              >Nah man, the 45-70 with the cum reservoir is where it's at

              Like so.

  6. 2 years ago
    Anonymous

    go leave, Black

  7. 2 years ago
    Anonymous

    I've been on /k/ since it began and this is at least the 20th time I have seen this exact thread in all my years

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *