-'90 Pontiac Firebird (jealous? then you and the missus got somethin' in common!)
"Set em' up, line em' down, size em' up, and hit em' where it hurts!" - TSgt Larry "Steel Hands" McBuckland, USAF "Bloody Rhino Heads"
"Millennials wouldn't know a hard day's decent work, if it slapped em' upside the head, and tied their bootstraps in a knot!" - SA Gerald "Hell Tiger" Morris, USCG, 991st "Blue Shark Devils"
“M16? Looks like you stumbled two steps too far from the sweet spot!” - Sgt Ron “Brick Breaker” Lesterson, USMC, 132nd "Dust Devil Riders"
X2 Light fighter, They got the bad lever controls backward and everyone needs to get rid of the shitty ambi mag release that gets in the way of my trigger finger when i'm switching shoulders
Ordered a Mk12 gas block. What are the actual advantages of a Mk12 gas block over a regular low profile .750 block? Feels like I got fleeced for clooner tism tbh
Good to know, this spikes barrel is moderately overgassed but not nearly as bad as the FN barrel on my BCM receiver/railed upper. That thing sends casings clear forward of the firing line. Never have to clean up at the range when I bring it lol. My FN M4 carbine length barrel is gassed amazingly though, shoots the smoothest out of all three.
rooftop dropped another batch yesterday while I was at putt putt but couldn't buy it b/c they weren't available to people who previously got them 🙁
I NEED one for my rifle
Can we admit that the ACRO is made in china already? There is no other explanation for ten different companies to be able to come out with theirs months after it's first release.
>Can we admit that the ACRO is made in china already?
Nope, we're not gonna play along with your cope >There is no other explanation for ten different companies to be able to come out with theirs months after it's first release.
This is gonna blow your frickin mind, but there was an ACRO P1
Soaking Sammy the Schizo Sheet Stainer aka PeePee Peter Prolific Pedophile
>P1 out for years >companies make their own closed emitters because people want closed emitter optics
Fricking shocking, next you're gonna tell me that some optics can use the same mounts as Aimpoint T2s
arg, its been a while since I've handled an AR-15 or guns in general. Getting back into it after a very long hiatus. Was more a machine gunner in the Army anyways. Technical question that maybe you all can answer in good faith.
If I'm locking the bolt to the rear, should there be any play after pulling on the charging handle all the way back, putting tension on the buffer spring? I'm finding with my Stag that I bought from my Dad there's a bit of play on the charging handle and BCG after locking it back. If I pull it back just a bit farther, it drops the bolt catch and sends the bolt flying forward. Is this normal? I'm assuming not. This is with no magazine in the magwell. With a mag in, it functions as it should. There is a bit of play, but the bolt catch doesn't disengage like it would with no mag. If it helps, swapped out an oversized mag release button for a small one and took a BAD lever off. Any info is helpful because I need to know if I need to replace the bolt catch spring.
For reference I was mainly issued M249s and 240Bs in the Army. M4s were all beat to shit since they were in the arm's room. Never really noticed this issue while handling military issue or my Dad's AR before.
It’s supposed to reengage the bolt if you pull it the charging handle back past the bolt catch moron. When the bolt catch is engaged the charging handle should move forward without the bolt. When you pull the bolt back again after chambering a round it will cycle the action.
>There is a bit of play, but the bolt catch doesn't disengage like it would with no mag
The magazine follower pushes up on the bolt catch when the mag is empty. When there is no mag there is nothing to push up on it unless you activate the catch manually.
I like shooting them, I like building them, I like how they smell, I like cleaning them and learning about them >Which of the guns you own is your favorite? Which AR-15?
probably the UTE, even though it burns my hand, I'm enjoying this new rail too
I've never seen that rail on someone's gun yet. Strangely interesting, I think I like it. She may not be the prettiest in the room but she's got some attractive personality.
[...]
Then why did the bloody front fall off anon? It's not supposed to do that is it?
>I've never seen that rail on someone's gun yet
yeah that's partially why I wanted to try it out, it's very slim. If it had a couple mlok slots on the bottom so I don't have to run the handstop all the way forward it would be quite good
>he doesn’t deny sucking donkey bonkers for fun
This is concrete proof right here that not only does the schizo suck donkey boners, he does it for fun. I bet that homosexual swallows, too. Here it is plain as day: he does not deny it which makes it 100% true and fact. The schizo is a gay donkey fricker and probably takes donkey clock up the ass all day long.
Why do you suck donkey boners for fun? Since you don’t deny it please explain to us why you derive pleasure from sucking on a donkey’s penis? Why do you do it daily?
man i really want to like the CTR, but it gives off cringey "2011 tactical carbine" vibes that I can't get past. To me the CTR will always be the "tacticool 1337 operatorrz" stock
i get where youre coming from, but i disagree. i think with the enhanced buttpad and riser it looks better and a sopmod looks way out of place on this build.
was thinking of namegayging as "Sammy sheets in the schizo street" and then doing a gag but make it actually fun but then I used both my braincells and decided I wouldn't.
>LMT
Worse machining and finishing than Aero, ambi shit that's basically useless >Geissele
honestly as much as I dislike Bill, the lowers are generally reasonably priced and all of them have a proper M16 cut.
Post something that costs more than this or frick off.
[...]
>Isn’t LMT supplying Estonia and New Zealand?
What military powerhouses. In seriousness however, my LMT MWS is of impeccable quality. My LMT MARS-L lower has worse machining than my Aero. In fact I've never even seen machining marks or weird cuts to the trigger guard area before, until buying that lower, and now I've seen the same on several more. Basically they do no finishing on areas of the lower which will be not visible when assembled. Which isn't a huge deal, but when budget brands like Aero put out better looking blems than full price LMT products, it seems very wrong.
I'm flattered you think my guns are nice enough for anyone to bother stealing my pictures. >raging
Maybe a bit. I am quite disappointed in the drop in quality from my MWS to MARS-L. They can and should do better.
2 years ago
Anonymous
What light is that?
2 years ago
Anonymous
Arisaka E2HT
2 years ago
Yukari
Very nice, is the optic high enough for you to use over ear hearing protection? I noticed the front rail area didn't have a lot of clearance.
2 years ago
Anonymous
>is the optic high enough for you to use over ear hearing protection?
Works just fine for me, yeah. The rail is a bit higher than an AR-15 though, might not work as well otherwise
2 years ago
Anonymous
Mine has no issues and ive never seen one irl with issues.
Thanks. For making me get out of bed tho.
2 years ago
Anonymous
>using the bed to crop your toes out >showing off those two on "accident"
ooh you a nasty b***h aint you? act all shy n shit but i kno u a freak
2 years ago
Anonymous
<:)
2 years ago
Anonymous
>ive never seen one irl with issues.
I hadn't either, and I spent a lot of time calling people sour grapes butthurt poorgays and the like for claiming LMT qc fell off after their move. Until I got it in my hands firsthand.
It's pretty natural to believe what you see, so I don't judge or blame you. I did the same thing after all.
My newer LMT lower is functionally fine, but the machining is just weird. Machine marks and other shit all over any surface that isn't visible when assembled. There's simply no reason they can't clean that up, in no world should a PSA blem be less fricked up than an LMT.
2 years ago
Anonymous
>Machine marks and other shit all over any surface that isn't visible when assembled. >in no world should a PSA blem be less fricked up than an LMT
Do you has some pictures to elaborate with?
2 years ago
Anonymous
Here's one. It doesn't show up well in picture, but there's a big scoop missing there and a sharp point under the trigger guard area. The entire area covered by the grip is covered in machine marks.
Is this kinda nitpicking when it doesn't functionally matter? I don't think so. Again, PSA blems come out better than this. Nobody is just leaving machine marks and gouges in their lowers. I have two Aero blems and they have tiny bits of marring where the forging was damaged, not something where they just got lazy with the machining to save a buck.
2 years ago
Anonymous
>OH MY GOD MY LMT CAME TO ME WORN, THIS IS DETAILED AND AWESOME COATING >OM MY GOD WHAT THE FRICK MY PSA CAME IN ALL SCRATCHED LOOKING LIKE IT CAME FROM RHODESIA HERSELF
I got a flashlight mount and a sling now. I also got around to repainting that magazine release everyone hated.
Flashlight is coming soon. I'm getting a maglite XL200 or XL100
Yeah looks like the surefires are a bit out of what I'm willing to spend on a flashlight I'll probably never really use.
The streamlight TLR-3 looks like I could get some mileage out of it since I can mount it to my rifle and to my handgun though. Either that or the TLR-7A. Either of those any good?
Not him but get the HLX if you are poor they aren't that bad. For surefires you should check out the g2x on your budget. The tlr7 is okay on a compact handgun but I would never put one on a rifle.
Get one for each.
HL-X has a fragile pressure pad wire and pretty mediocre throw. TLR-1HL has fairly poor throw and switches that toggle on if you so much as bump them. But - they work, and they're inexpensive, so if you're not looking to pony up to a Surefire or Modlite, well there's your options.
Holosun PID, $100 for light or $200 for IR and Green Vis. Oh it's also titanium.
2 years ago
Anonymous
I'll add this to my list of options. I still really want to look into building one though because I'm a huge fricking nerd. The titanium is a nice feature though since I'm gonna be camping with it a lot.
Oh good I thought you had already bought the maglite. Yukari has a point about the pressure switch despite him being a fatass but it looks like you weren't planning to use it like that and they do come with a clicky cap. However the built in mount doesn't lend itself to pocket carry if that is a concern. They do share the same footprint as surefire if you ever decide to go that route so there are a lot of aftermarket mounting options. They do not share the same tailcaps but there is an adapter that would allow you to use surefire endcaps but that plus the endcap is like $150+ so not really a smart decision financially.
I try to ask people who actually have experience before I do most things. My current carry flashlight is a 5 dollar harbor freight one and I'm kinda sick of replacing the things. I'm a bit wigged out about anything with a pressure switch because I dont want the wire to get caught on a branch or something. Right now I just carry a handgun when I'm out in the bush but since I have a rifle now it's just a better option.
>Muh contracts
if AERO or even PSA could get a whiff of a contract they would knock it the frick outta the ballpark without a doubt. So don't try to hit me with the "Muh no contract" shit when we know deadass an LMT can't outdo a fricking pathetic PSA in anything.
Bullshit. I'm the guy talking shit on LMT, but I'm only doing so because they're capable of so much better than what they're putting out now. It's very apparent they're cutting every corner they think they reasonably can, and sometimes a few more.
However, from an engineering standpoint LMT has Aero and PSA flat out beat. They are also capable of much greater quality, and quality control. When LMT is good, they're really good. But right now, they're not doing their best work from what I've seen firsthand.
>buy something from ar15 discounts on wednesday >still hasnt shipped >buy something from some small vendors on friday >they shipped out same day and ill have it monday
god damnit
Continual proof that you are the literal biggest homosexual in this thread. I bet your daily caloric needs are met entirely in donkey jizz, you sick homosexual. It is now beyond a reasonable doubt that you do nothing but frick, and be fricked by, animals day in and day out. And you merely stop by here between ass rammings, and your thirst for wiener is insatiable.
I honestly had no idea people built their own flashlight. It makes sense now but I would have never thought of it. I'm gonna do a bit more looking into this option because I do like building all my own shit if I can help it.
Not him but get the HLX if you are poor they aren't that bad. For surefires you should check out the g2x on your budget. The tlr7 is okay on a compact handgun but I would never put one on a rifle.
The g2x looks about like what I want. I want something I could carry as a flashlight on it's own because I don't always carry a gun around when I'm out at night.
Thanks for the help guys. That's exactly why I posted my intentions here before buying anything. I'm a bit new to owning or decking out a rifle.
Oh good I thought you had already bought the maglite. Yukari has a point about the pressure switch despite him being a fatass but it looks like you weren't planning to use it like that and they do come with a clicky cap. However the built in mount doesn't lend itself to pocket carry if that is a concern. They do share the same footprint as surefire if you ever decide to go that route so there are a lot of aftermarket mounting options. They do not share the same tailcaps but there is an adapter that would allow you to use surefire endcaps but that plus the endcap is like $150+ so not really a smart decision financially.
Not underage, a troony, or defending anybody. I just want to know why you do it. Can you give us any insight into why you commit sexual crimes against humanity on a regular basis? Why donkeys, specifically? And why so often? Very simple, especially now that we know it’s factual
The way he deflects whenever confronted with this is the biggest giveaway.
Not every anon is as smart as we are though, so I think a few people think this is some kind of genuine dispute.
Shocking, he cannot put into words why he loves animal wiener to this insane degree. What was it like having an entire gallon worth of semen pumped into your gaping ruined butthole, one wiener at a time? Why did your first 30 attempts at 5 gallons fail? I hear the donkeys ran out of semen, do you plan on bringing in more donkeys next time?
Incredible. Now how did you prepare your butthole for enough donkey wieners? How many a day do you fricknon average? I hear the number is in the hundreds, and that your mothers diet while pregnant with you consisted solely of Black person wiener, crack, and Franzia boxed wine. Explains why you act like this, and why you’re such a donkey/fem boy lover.
His love of donkey/dog/black wiener is on full display and is undisputed fact. He cannot deny it and is fully embracing it, the schizo is finally willing to come to terms, here, publicly, with his severe sexual depravity and homo-lust. It is now entirely possible his sheets were stained with a combination of donkey cum and his own piss but we have yet to see confirmation just yet.
What the frick is wrong with you with this monkey torture shit, what sort of “man” pays jungle sudecas to torture animals on his behalf
You are sincerely mentally ill
Get help you pathetic fricking homosexual good lord
I try to be a positive person but I genuinely hope something bad happens to you since you appear hell bent on torturing animals like that
Put pic related on my car-been and shot it with armor on for the first time. Anyone else have issues with it snagging on your plate carrier? Should i just shoot with it more?
I went back to a GI charging handle because everything on the market seems to fricking snag on everything even when I'm using different cants and angles of the gun to clear shit.
And unsurprisingly there it is, a full confession that he does it all out of shame. Does the fetal alcohol syndrome also affect this? It’s truly brave of all those men who are willing to look past your disability and physical deformations to satisfy your gaping, cavernous, butthole
Wow such shame in his actions that he had to leave and cannot bring himself to respond further. More likely however is that the 53rd donkey is, at this moment, choking him unconscious while he pleasures himself with tweezers.
How does schizo anon manage to have the gas pedal to the floor on his anger at trannies 24/7 holy shit
Even when I get angry at something the longest I can stay angry at it is a few days or weeks but it's been literally years and he's still crying about trannies every day
Mental illness is a hell of a drug. It isn’t something that just goes away one day and you become normal after that. This will go on for the rest of his life.
Sincere, profound, and crippling mental illness that used to result in involuntary incarceration. Bigger question is why the jannies don’t do a better job policing his shit
If you're talking about me, Yes I did get my kac cqb in today. Was waiting to take a pic of it and post it till tomorrow with better lighting, cause all the lighting in my house is dogshit.
I know where you can get one if you're interested anon
I can't believe this guy is "settling" for a KAC 11.5, and I have to sit here with my fricking BCM, not even daring to imagine owning a stoner rifle because it's so far out of my reach.
I'm not settling, you must be talking about another anon, perhaps the guy that responded to my post. I like it a lot already, haven't shot it yet and it's nice and ergonomic, the bolt is sweet, and the charging handle is better than I expected it to be. I don't think I'm going to get a radian or geissele charging handle. I'll sell you my mk18 with geissele mk16 rail if you want.
There are people on tacswap looking to trade 11.5 for 14.5, try there anon. Also don't sell for 1.8 if it isn't actually used. Sell for msrp maybe even slightly above msrp because it's hard to get right now. Just don't be a israelite about it. idk why you would buy a cqb if you didn't want one. that' doesn't make any sense.
2 years ago
Anonymous
It's only got marks from mounting, I got it when they were harder to get for a decent deal but then I realized I didn't like shorter barrels as much 14.5s
I've been prowling tacswap and I only really see people trying to sell their 11.5s and 14.5s for similar prices
There's a lot I've seen for 1.8-2.1 depending on bolt
2 years ago
Anonymous
what bolt do you have? Those people are selling for those prices probably because they don't have the new bolt and it's got rounds through it.
2 years ago
Anonymous
Phosphate, unfired, I got the CQB for the house because of these colored Black folk I've seen around causing trouble but since renovating a bit I feel like a 14.5 would serve fine for both rural use and in my home. So I don't really need the 11.5 anymore
2 years ago
Anonymous
Are you even in a rural area? 1.8 is about correct then. I'd offer maybe slightly less if I wanted it to sell fast. You're going to have to accept though you're in a bad place and time for this situation. The Kac's have just been updated and yours is used which already makes it less valuable. I'd just accept that I got something I'm not totally happy with, run the frick out of it and use it for another purpose. I seriously doubt you're going to need the extra 400-500fps. Quality 77 grain ammo will take you out pretty far.
2 years ago
Anonymous
I live North Carolina. Just think a 14.5 would serve me a little better. Don't need and 11.5 so I don't want to just spend an equal amount on a used KAC 14.5 and have this as a paper weight so I'll probably want to sell it. I got it brand new for 1.7 a bit ago so it wouldn't even be a loss to me I'm just seeing others go for the same price so I might have a hard time selling it unless I cut it down a bit so meh.
2 years ago
Anonymous
1.6*
2 years ago
Anonymous
I know how you feel a little bit, I just bought a MCX Tacops like 3 or 4 months ago and they just started releasing the new MCX today. Now I want to sell mine and get the new one. I didn't even get to shoot it, I still haven't even gotten my suppressor stamp from the atf yet and there's already a new MCX released... Christ.
2 years ago
Anonymous
>Omg they released the new iphone I need to upgrade!
2 years ago
Anonymous
It's actually some pretty substantial upgrades I care about. ambi controls, lighter by a pound, fully compatible with ar15 triggers. I also think they gassed it differently because in the garand thumb video he said it felt lighter, and the reason the ar15 triggers weren't working was supposed to be in part due to the violent cycling of the bolt chewing up the FCG parts.
2 years ago
Anonymous
Yeah it sucks. I'm tight on cash so I'm praying to God someone will want my upper for a decent price or trade me a 14.5. I don't even care about the updates really, I just want something that will never break and can do anything I'd need. I moved from inner town to the outskirts of it on an actual mountain so my needs have changed and I'm feeling some buyers remorse all things considered.
I know 11.5s can reach out too but I'm just feeling the 14.5 with the change in terrain and having a bigger home so I dunno. I'll never put 50K rounds through these for the upgrades to matter to me, if my current build was 14.5 I'd be happy because it's bomb proof and will be working long after Biden sends dog drones to our houses.
2 years ago
Anonymous
Yeah actually you just reminded me, there's a chance although I'm not expecting much, that we could get suppressors without stamps.
I don't care about these gay laws whatsoever but I just remembered even if that did happen I'd have to conduct a spell to get the brake off my KAC to be able to mount a suppressor on it because I'm never dropping 5k on a KAC can.
Even if cans never get un-NFA'd I'd still dislike the situation with the (albeit sexy) KAC FH. These things are like Rocksett'd on with 30 pounds of the shit or something so I hear.
2 years ago
Anonymous
kac cans are not 5k unless you're referring to gunbroker nonsense. Eventually they will become available for 1.5k there just isn't a lot of them being made right now. > I'd have to conduct a spell to get the brake off my KAC to be able to mount a suppressor on it
kek, you just have to let it sit in water for a bit, boiling it is faster I hear. You can just take it to a kac gunsmith if you're nervous about doing it yourself. I'm thinking I'll be putting my surefire 300 sps on mine until I can get a kac can, god knows however long that will be.
2 years ago
Anonymous
I heard Rocksett can be a b***h to get off depending on the threads and how well they're covered both with rocksett and by the device itself but I don't know, I've never removed a factory muzzle device
Either way I'm never getting a can unless I make one or buy it from a buddy so I'd be better off with some other device. They are super sexy though. I love the ball bearing detents.
2 years ago
Anonymous
You think you're not going to buy a can now, like all people when they first began. But most end up getting a can after a while. I made my form 1 suppressor, it was my first. Now they changed it so you basically have to be a machinist to do a form 1.
2 years ago
Anonymous
I'll get a can, just not a form one.
2 years ago
Anonymous
You mean you're going to make one and not register it?
2 years ago
Anonymous
I'm gonna get out there and VOTE VOTE VOTE against hose Ultra MAGA Chuds after I get my Omicron booster to enter crowds safely!
I spent a month saving up for a sopmod stock.
I'd love to buy your mk18, but I need to start saving today. Please hold onto it for me, i should have the funds in about 12 years.
>what is a credit card
I think you're being a cuck anon, get a better job. I could afford to quality guns when I was just a food delivery guy. I worked 4 times a week, usually on the weekend, and in 1 week I'd make 800-1500 dollars. 1500 being my best week.
2 years ago
Anonymous
>my food delivery job with untaxed tips in america under the table while working 8hours like a homosexual delivering pizzas while smoking weed and hip hop music i made goood money
2 years ago
Anonymous
Yes I was untaxed, but I only worked for 4-5 hours a session. Also I was not smoking weed or listening to rap music. Don't insult me anon, I'm not a Black person.
2 years ago
Anonymous
I make exactly 920 dollars a week and am still flat broke every week
AMA
2 years ago
Anonymous
Cut costs and get a better job bro. you're doing something wrong.
I can't believe this guy is "settling" for a KAC 11.5, and I have to sit here with my fricking BCM, not even daring to imagine owning a stoner rifle because it's so far out of my reach.
As somebody who has both, I'll tell you there's a reason I have owned 3 acogs and I still have just 1 elcan. You really just can't beat the Acog/RMR combo for the money. Assuming they were the same price, still yet the Acog/RMR combo is super light. I've personally not used the LED Acogs, but I've heard the argument for the superior placement further up the optic for the RMR mount being superior to the TA31/TA01. I'm still partial to the TA31 and TA01. That being said, the Elcan is still a great optic, the problem is that it's just much more expensive and heavier for having the same type of clarity and FOV that the 4x32 Acog gives you.
https://i.imgur.com/Ha45Quv.jpg
[...]
I should also clarify, the placement of the RMR on the LEDcog is better primarily under nods as the thing isn't going to be smacked against your NODS, the RMR is so far back on a TA31 that it makes it kinda tricky sometimes to not hit it. If you don't have nods, I'd pass on the LED acog just for that reason alone.
Yeah I was mainly considering ta02 due to the forward placement of the mounting plate for rmr, and I think being able to manually control brightness on an acog is pretty dang neat. Plus it gets really good battery life on a single AA, so that's also neat.
As somebody who has both, I'll tell you there's a reason I have owned 3 acogs and I still have just 1 elcan. You really just can't beat the Acog/RMR combo for the money. Assuming they were the same price, still yet the Acog/RMR combo is super light. I've personally not used the LED Acogs, but I've heard the argument for the superior placement further up the optic for the RMR mount being superior to the TA31/TA01. I'm still partial to the TA31 and TA01. That being said, the Elcan is still a great optic, the problem is that it's just much more expensive and heavier for having the same type of clarity and FOV that the 4x32 Acog gives you.
I should also clarify, the placement of the RMR on the LEDcog is better primarily under nods as the thing isn't going to be smacked against your NODS, the RMR is so far back on a TA31 that it makes it kinda tricky sometimes to not hit it. If you don't have nods, I'd pass on the LED acog just for that reason alone.
looks like the before pics of the 870 on Wilson Combat's site
He just got banned. Notice how the other new thread got deleted. He keeps making new threads and getting them deleted when he gets a ban.
>TFW someone gives you a rifle with an optic lower than 3.5"
God help me and my neck strain
>The fricker that banned magazines over 10 rounds
This thread sucks. Frick you.
Now I understand your opposition to his policies, but you need to respect the office of the President of the United States of America, Bucko
-Buck "Doc" McBrackland, signing off!
-------------------------------------------------------------------
5648399 posts
-PFC, USMC 1992-1993, 164th "Hell Devil Hounds"
-Ar15.com Gold Account (2002-present)
-'90 Pontiac Firebird (jealous? then you and the missus got somethin' in common!)
"Set em' up, line em' down, size em' up, and hit em' where it hurts!" - TSgt Larry "Steel Hands" McBuckland, USAF "Bloody Rhino Heads"
"Millennials wouldn't know a hard day's decent work, if it slapped em' upside the head, and tied their bootstraps in a knot!" - SA Gerald "Hell Tiger" Morris, USCG, 991st "Blue Shark Devils"
“M16? Looks like you stumbled two steps too far from the sweet spot!” - Sgt Ron “Brick Breaker” Lesterson, USMC, 132nd "Dust Devil Riders"
Proud HaYovel volunteer! https://serveisrael.com/
https://www.npr.org/2012/03/07/148076026/christians-provide-free-labor-on-israeli-settlements
TYFYS
>https://www.npr.org/2012/03/07/148076026/christians-provide-free-labor-on-israeli-settlements
lol. lmao.
what kind of AR should i buy. i am moronic.
Fulton Armory - Legacy Rifle. Well worth the 1500 bones
Palmetto state armory. Get good with it and when it starts to fail after tens of thousands of rounds, invest in a more premium gun.
X2 Light fighter, They got the bad lever controls backward and everyone needs to get rid of the shitty ambi mag release that gets in the way of my trigger finger when i'm switching shoulders
M&P 15
how many rounds have you shot through it
Ordered a Mk12 gas block. What are the actual advantages of a Mk12 gas block over a regular low profile .750 block? Feels like I got fleeced for clooner tism tbh
besides clooning, its a lot stronger and can endure overgassed conditions a lot more
Good to know, this spikes barrel is moderately overgassed but not nearly as bad as the FN barrel on my BCM receiver/railed upper. That thing sends casings clear forward of the firing line. Never have to clean up at the range when I bring it lol. My FN M4 carbine length barrel is gassed amazingly though, shoots the smoothest out of all three.
It's your gas port size and gas tube length and your buffer spring not your barrel. Where did you get your stupid information, stupid.
holosun EPS seriously improved the optical distortion and light transmission over 509
What happens to a 509T in a downpour. Immediately filled up with water on the first shot
>sample size of one
anecdotal evidence thrown into the trash
Don't take my word for it then....ask around, you'll hear the same.
Yea and black people are all criminals. You don't even need to ask around to know.
sound logic
>not colt lower
So close.
That's not his
>he didnt swap out the turd grip for an A2
So close.
10/10 Best in show
So hot right now
Holosuns are okayish for casual trips to the range. My hs507 v2 lost its lens after 1k rounds of 22lr
What are your thoughts on KAK industry?
I'm thinking of buying one of their rails.
Oh yeah, and dont forget to include “FemininePen15” in the email for 15% off.
>gov contract
>semiauto only
They’re not military contract. They’re from another gov agency. Dea, nsa, fbi, etc. idk from where
Serious question. What does this do that a Palmetto State Classic doesn't do?
When the word “C*lt” is uttered, all trash talking ceases.
so true!
If ya ain't got a Colt, your just a dolt.
>gov contract
>dd grip
lol
it has a sear block machined into it to make full auto double not possible
They’re surplus trade ins moron. They’re legit pipe layer lowers.
more like pipe cleaner.
Neither
Best of luck finding one at a fair price
>not ordering one the second they became available for pre-order on Eurooptic
plebs
rooftop dropped another batch yesterday while I was at putt putt but couldn't buy it b/c they weren't available to people who previously got them 🙁
I NEED one for my rifle
There are so many variants out in the wild that i'll rather get one that isn't charging ridiculous pricing for just being a middleman.
Thats what I would do
Gotta STALK the DROPS bro!
Anyone here have opinions on mounting a high powered green laser on their rifles? I want to be able to burn things as well as shoot them.
>Since Sweden is healing from the covid lockdown bullshit
Sweden never had lockdowns.
Can we admit that the ACRO is made in china already? There is no other explanation for ten different companies to be able to come out with theirs months after it's first release.
>Can we admit that the ACRO is made in china already?
Nope, we're not gonna play along with your cope
>There is no other explanation for ten different companies to be able to come out with theirs months after it's first release.
This is gonna blow your frickin mind, but there was an ACRO P1
Its a box on a dot, not exactly groundbreaking tech innovation
>P1 out for years
>companies make their own closed emitters because people want closed emitter optics
Fricking shocking, next you're gonna tell me that some optics can use the same mounts as Aimpoint T2s
Show us a single gun you own.
Show me your butthole or you dont have one.
That doesn't work here. If you're gonna namegay the least you can do is post AR.
You're not worthy.
arg, its been a while since I've handled an AR-15 or guns in general. Getting back into it after a very long hiatus. Was more a machine gunner in the Army anyways. Technical question that maybe you all can answer in good faith.
If I'm locking the bolt to the rear, should there be any play after pulling on the charging handle all the way back, putting tension on the buffer spring? I'm finding with my Stag that I bought from my Dad there's a bit of play on the charging handle and BCG after locking it back. If I pull it back just a bit farther, it drops the bolt catch and sends the bolt flying forward. Is this normal? I'm assuming not. This is with no magazine in the magwell. With a mag in, it functions as it should. There is a bit of play, but the bolt catch doesn't disengage like it would with no mag. If it helps, swapped out an oversized mag release button for a small one and took a BAD lever off. Any info is helpful because I need to know if I need to replace the bolt catch spring.
For reference I was mainly issued M249s and 240Bs in the Army. M4s were all beat to shit since they were in the arm's room. Never really noticed this issue while handling military issue or my Dad's AR before.
It’s supposed to reengage the bolt if you pull it the charging handle back past the bolt catch moron. When the bolt catch is engaged the charging handle should move forward without the bolt. When you pull the bolt back again after chambering a round it will cycle the action.
Okay. Thanks for the info. Was just minorly concerned that it may be a problem. Probably just something I didn't usually pay specific attention to.
>There is a bit of play, but the bolt catch doesn't disengage like it would with no mag
The magazine follower pushes up on the bolt catch when the mag is empty. When there is no mag there is nothing to push up on it unless you activate the catch manually.
holy shit why does it look like it was slathered with mud
>everyone hates him.
some of us want to pin her down if you know what I mean
well this thread went from the shitter straight into the cesspit
Why are you still here?
ew
why do you complain about what men do? can’t read your mind so do explain
theres literally a noguns underage tripgay, it means nothing to this general anymore
Right so he ignores you, which isn’t proof, you moronic homosexual. You suck donkey boners for fun.
I just want to talk about guns bros
What do you like most about guns? Which of the guns you own is your favorite? Which AR-15?
Did the front fall off of your gun?
no
Then why did the bloody front fall off anon? It's not supposed to do that is it?
I like shooting them, I like building them, I like how they smell, I like cleaning them and learning about them
>Which of the guns you own is your favorite? Which AR-15?
probably the UTE, even though it burns my hand, I'm enjoying this new rail too
I've never seen that rail on someone's gun yet. Strangely interesting, I think I like it. She may not be the prettiest in the room but she's got some attractive personality.
yea
Are you the guy that's always whining about shitposters?
no
no thats me
>I've never seen that rail on someone's gun yet
yeah that's partially why I wanted to try it out, it's very slim. If it had a couple mlok slots on the bottom so I don't have to run the handstop all the way forward it would be quite good
I bought it when it was still $10 per inch and put it on a spare upper I had at the time. I just drilled holes into it and put mlok panels.
>he doesn’t deny sucking donkey bonkers for fun
This is concrete proof right here that not only does the schizo suck donkey boners, he does it for fun. I bet that homosexual swallows, too. Here it is plain as day: he does not deny it which makes it 100% true and fact. The schizo is a gay donkey fricker and probably takes donkey clock up the ass all day long.
im talking about ddBlack person the massive larper
i like dd even if he's massive
ok bootlicker
he pretends to work at an anti-2a company and has literally posted zero proof of said employment, he has no gun, no money, and hes a fricking weeb
>crying about someone being a weeb on an anime website
It's time to go back.
What exactly is he larping as? You sound like a moron.
oh
post proof of employment or gtfo
>refuses to post proof
frickin knew it
first of all, im watching overlord calm your breasts
second, i have posted proof several times, you're likely just a newbie and havent seen them
This isn't good for your blood pressure. Calm down.
Why do you suck donkey boners for fun? Since you don’t deny it please explain to us why you derive pleasure from sucking on a donkey’s penis? Why do you do it daily?
You’ve been at this all day long. Is this really fun for you?
Nah the fun part is when he sucks off donkeys
Just calm down, okay?
The donkey boners got him all riled up and excited
None of the 3, try again, donkey sucker/dog fricker (proven fact)
EUROS GET THE FRICK OUT
everyone shut the frick up and post your Army Rifle 15
I only have an Automatic Rifle model 15
I really like the ash gun, honestly
that looks like a toy plastic green army man gun
that's why I like it
Why is all your gear coyote/tan but your old rifle is bright green?
Just asking because I'm curious
does magpul brace abuse your shoulder or nah and why the 1.5x?
Why do you have a shitty filter on your mask? You can't do anything right can you?
what is Sigs reasoning for slapping a tiny stock on a FRICKHUEG battle rifle?
Probs to meet a recommended or maximum weight requirement for the program and/or OAL requirements.
now that you mention it it does look moronic.
man i really want to like the CTR, but it gives off cringey "2011 tactical carbine" vibes that I can't get past. To me the CTR will always be the "tacticool 1337 operatorrz" stock
I don't get that feeling at all from it. It looks pretty minimalist and light while being comfortable.
i get where youre coming from, but i disagree. i think with the enhanced buttpad and riser it looks better and a sopmod looks way out of place on this build.
agreed I don't like sopmods. I had one for a while on my mk18 and it just felt big and cumbersome and awkward looking.
Now he’s admitting to having dogs frick his ass, what a homosexual
The schizo is running out of gas just like he's running out of alibaba optics
Hes got plenty of donkey boners though
What does /arg/ think bros? https://www.youtube.com/watch?v=Rnh9OCHI_ME
oh
huh
it's all been downhill since that rifle
hm
was thinking of namegayging as "Sammy sheets in the schizo street" and then doing a gag but make it actually fun but then I used both my braincells and decided I wouldn't.
>tfw when your girlfriend is so good at sucking your dick, that you have to wonder how many other dicks she's sucked to get that good
that dude played his card and got caught. He regrets being foolish.
hell yea bro its such a weird feeling
just pick out a prostitute and i'll send her to your house chairbro
>schizoid is loose again and the troony jannies refuse to do anything about it, episode #1337
how many times are you going to post the same pictures of that nerf gun?
bro you're in like half of the gay /europol/ threads that get posted here whining about muh vatniks
what are you talking about? I got tired of the NCD tourists faster than anyone else
if you report him, he will actually get banned.
But snitches get stitches.
Looking to buy a lower for my second build. Besides a rollmark, what am I paying for when I buy something from LMT or Geissele over Aero?
Nothing, Bad lever and a troy ambi mag release destroys ever ambi lower on the market that isn't this
>troy
What's wrong with troy
They hired the dude who killed George Floyd
they hired the cop who killed cliven bundy.
dignity. not supporting a company that enforced the vax mandate.
>LMT
Worse machining and finishing than Aero, ambi shit that's basically useless
>Geissele
honestly as much as I dislike Bill, the lowers are generally reasonably priced and all of them have a proper M16 cut.
poor detected
Post something that costs more than this or frick off.
>Isn’t LMT supplying Estonia and New Zealand?
What military powerhouses. In seriousness however, my LMT MWS is of impeccable quality. My LMT MARS-L lower has worse machining than my Aero. In fact I've never even seen machining marks or weird cuts to the trigger guard area before, until buying that lower, and now I've seen the same on several more. Basically they do no finishing on areas of the lower which will be not visible when assembled. Which isn't a huge deal, but when budget brands like Aero put out better looking blems than full price LMT products, it seems very wrong.
>stealing pictures are raging about a gun you can't afford
oof
I'm flattered you think my guns are nice enough for anyone to bother stealing my pictures.
>raging
Maybe a bit. I am quite disappointed in the drop in quality from my MWS to MARS-L. They can and should do better.
What light is that?
Arisaka E2HT
Very nice, is the optic high enough for you to use over ear hearing protection? I noticed the front rail area didn't have a lot of clearance.
>is the optic high enough for you to use over ear hearing protection?
Works just fine for me, yeah. The rail is a bit higher than an AR-15 though, might not work as well otherwise
Mine has no issues and ive never seen one irl with issues.
Thanks. For making me get out of bed tho.
>using the bed to crop your toes out
>showing off those two on "accident"
ooh you a nasty b***h aint you? act all shy n shit but i kno u a freak
<:)
>ive never seen one irl with issues.
I hadn't either, and I spent a lot of time calling people sour grapes butthurt poorgays and the like for claiming LMT qc fell off after their move. Until I got it in my hands firsthand.
It's pretty natural to believe what you see, so I don't judge or blame you. I did the same thing after all.
My newer LMT lower is functionally fine, but the machining is just weird. Machine marks and other shit all over any surface that isn't visible when assembled. There's simply no reason they can't clean that up, in no world should a PSA blem be less fricked up than an LMT.
>Machine marks and other shit all over any surface that isn't visible when assembled.
>in no world should a PSA blem be less fricked up than an LMT
Do you has some pictures to elaborate with?
Here's one. It doesn't show up well in picture, but there's a big scoop missing there and a sharp point under the trigger guard area. The entire area covered by the grip is covered in machine marks.
Is this kinda nitpicking when it doesn't functionally matter? I don't think so. Again, PSA blems come out better than this. Nobody is just leaving machine marks and gouges in their lowers. I have two Aero blems and they have tiny bits of marring where the forging was damaged, not something where they just got lazy with the machining to save a buck.
>OH MY GOD MY LMT CAME TO ME WORN, THIS IS DETAILED AND AWESOME COATING
>OM MY GOD WHAT THE FRICK MY PSA CAME IN ALL SCRATCHED LOOKING LIKE IT CAME FROM RHODESIA HERSELF
Any recommendations for good, in-stock, 14.5 barrels?
the 14.5" DD socom barrel that comes with your DD SOCOM upper from brownells
Not bad. But I have all the tools necessary to assemble an upper, don't think I'll ever buy a complete again
So is it the taste of the donkey boners or the semen that makes you commit donkey felatio?
I got a flashlight mount and a sling now. I also got around to repainting that magazine release everyone hated.
Flashlight is coming soon. I'm getting a maglite XL200 or XL100
>1 point sling
Well you’ll never get sack tapped not doing anything remotely athletic so I’m sure you’re fine
It's a 2 point, I just have it wrapped around and clipped back onto the back.
What's wrong with those? They seem pretty bright and low profile.
I'd say "get a surefire" but you will b***h at the price, get a streamlight at least ffs
Yeah looks like the surefires are a bit out of what I'm willing to spend on a flashlight I'll probably never really use.
The streamlight TLR-3 looks like I could get some mileage out of it since I can mount it to my rifle and to my handgun though. Either that or the TLR-7A. Either of those any good?
Not him but get the HLX if you are poor they aren't that bad. For surefires you should check out the g2x on your budget. The tlr7 is okay on a compact handgun but I would never put one on a rifle.
Get one for each.
HL-X has a fragile pressure pad wire and pretty mediocre throw. TLR-1HL has fairly poor throw and switches that toggle on if you so much as bump them. But - they work, and they're inexpensive, so if you're not looking to pony up to a Surefire or Modlite, well there's your options.
Holosun PID, $100 for light or $200 for IR and Green Vis. Oh it's also titanium.
I'll add this to my list of options. I still really want to look into building one though because I'm a huge fricking nerd. The titanium is a nice feature though since I'm gonna be camping with it a lot.
I try to ask people who actually have experience before I do most things. My current carry flashlight is a 5 dollar harbor freight one and I'm kinda sick of replacing the things. I'm a bit wigged out about anything with a pressure switch because I dont want the wire to get caught on a branch or something. Right now I just carry a handgun when I'm out in the bush but since I have a rifle now it's just a better option.
you're right it's all me.
unironically visit r/flashlight
what's wrong with your sling
>I'm getting a maglite XL200 or XL100
oh, you're being moronic on purpose, apologies
Answer me, fat man
Reminder to never get black parts and paint your rifle asap
Raw aluminum best base?
No, no aluminum at all. The best camouflage for your rifle is to not have a rifle. Then no one will notice it
kinda like how u posted an invisible gun
>Muh contracts
if AERO or even PSA could get a whiff of a contract they would knock it the frick outta the ballpark without a doubt. So don't try to hit me with the "Muh no contract" shit when we know deadass an LMT can't outdo a fricking pathetic PSA in anything.
Bullshit. I'm the guy talking shit on LMT, but I'm only doing so because they're capable of so much better than what they're putting out now. It's very apparent they're cutting every corner they think they reasonably can, and sometimes a few more.
However, from an engineering standpoint LMT has Aero and PSA flat out beat. They are also capable of much greater quality, and quality control. When LMT is good, they're really good. But right now, they're not doing their best work from what I've seen firsthand.
I was never sexually abused, answer the question and don’t shit up threads, stop projecting, Schizo Donkey Fricker
Oh and my rifle is better. Just answer the question it’s very easy, unless you’re having trouble deciding
>buy something from ar15 discounts on wednesday
>still hasnt shipped
>buy something from some small vendors on friday
>they shipped out same day and ill have it monday
god damnit
U wet the bed u nasty pissbaby
Don’t forget how he got spitroasted by a donkey and a dog to prepare for having a literal mile of BBC ram through him
Ewww, nasty!!! Doesn't surprise me one bit!
Continual proof that you are the literal biggest homosexual in this thread. I bet your daily caloric needs are met entirely in donkey jizz, you sick homosexual. It is now beyond a reasonable doubt that you do nothing but frick, and be fricked by, animals day in and day out. And you merely stop by here between ass rammings, and your thirst for wiener is insatiable.
I honestly had no idea people built their own flashlight. It makes sense now but I would have never thought of it. I'm gonna do a bit more looking into this option because I do like building all my own shit if I can help it.
The g2x looks about like what I want. I want something I could carry as a flashlight on it's own because I don't always carry a gun around when I'm out at night.
Thanks for the help guys. That's exactly why I posted my intentions here before buying anything. I'm a bit new to owning or decking out a rifle.
anon you're not taking your flashlight off your gun to go walking around with it
just get a second handheld and leave a light attached to your rifle
Oh good I thought you had already bought the maglite. Yukari has a point about the pressure switch despite him being a fatass but it looks like you weren't planning to use it like that and they do come with a clicky cap. However the built in mount doesn't lend itself to pocket carry if that is a concern. They do share the same footprint as surefire if you ever decide to go that route so there are a lot of aftermarket mounting options. They do not share the same tailcaps but there is an adapter that would allow you to use surefire endcaps but that plus the endcap is like $150+ so not really a smart decision financially.
Doesn't deny being a fat frick nor does he deny constantly wetting himself. Really sad!
Not underage, a troony, or defending anybody. I just want to know why you do it. Can you give us any insight into why you commit sexual crimes against humanity on a regular basis? Why donkeys, specifically? And why so often? Very simple, especially now that we know it’s factual
I would like to know as well!
The masses demand answers. I would also like to know.
True if big
You frickers do this shit deliberately.
Schitzo anon is playing a character
The anon that argues with him is schitzos buddy on discord.
there's a frickton of them bro. there was like 15 different ips responding to him as the same person last thread
The way he deflects whenever confronted with this is the biggest giveaway.
Not every anon is as smart as we are though, so I think a few people think this is some kind of genuine dispute.
Shocking, he cannot put into words why he loves animal wiener to this insane degree. What was it like having an entire gallon worth of semen pumped into your gaping ruined butthole, one wiener at a time? Why did your first 30 attempts at 5 gallons fail? I hear the donkeys ran out of semen, do you plan on bringing in more donkeys next time?
Incredible. Now how did you prepare your butthole for enough donkey wieners? How many a day do you fricknon average? I hear the number is in the hundreds, and that your mothers diet while pregnant with you consisted solely of Black person wiener, crack, and Franzia boxed wine. Explains why you act like this, and why you’re such a donkey/fem boy lover.
light mount options? fsb, hose clamps, or just screw them into the handguard? have a MI quad too but i like this fat thing.
FSB
Impact weapons makes a good one
thanks for the rec, and what rail is that? new to ars
No problem. Giessele 10" Mk4 Federal Mlok
Im all anons
Answer my question fat
Good call on the EDC condom. Hopefully you have time to slip it on your attackers.
i had to use a condom the other day and it reminded me why long term relationships are better than hookups
i hope he comes around for you
Wel that was never an accusation to begin with that was just you projecting and deflecting. Do you do it out of shame?
i havent read any of the people replying to him or his posts but i saw monkey
His love of donkey/dog/black wiener is on full display and is undisputed fact. He cannot deny it and is fully embracing it, the schizo is finally willing to come to terms, here, publicly, with his severe sexual depravity and homo-lust. It is now entirely possible his sheets were stained with a combination of donkey cum and his own piss but we have yet to see confirmation just yet.
What the frick is wrong with you with this monkey torture shit, what sort of “man” pays jungle sudecas to torture animals on his behalf
You are sincerely mentally ill
Get help you pathetic fricking homosexual good lord
I try to be a positive person but I genuinely hope something bad happens to you since you appear hell bent on torturing animals like that
Put pic related on my car-been and shot it with armor on for the first time. Anyone else have issues with it snagging on your plate carrier? Should i just shoot with it more?
I went back to a GI charging handle because everything on the market seems to fricking snag on everything even when I'm using different cants and angles of the gun to clear shit.
Try a few charging handles, stick with one or two that you really like
Geisselle ACH or no CH really. Radian isn't any better.
devildogconcepts.com/product/hard-charger-black-anodized/
Try one of these out. It probably wont get caught.
And unsurprisingly there it is, a full confession that he does it all out of shame. Does the fetal alcohol syndrome also affect this? It’s truly brave of all those men who are willing to look past your disability and physical deformations to satisfy your gaping, cavernous, butthole
Wow such shame in his actions that he had to leave and cannot bring himself to respond further. More likely however is that the 53rd donkey is, at this moment, choking him unconscious while he pleasures himself with tweezers.
How does schizo anon manage to have the gas pedal to the floor on his anger at trannies 24/7 holy shit
Even when I get angry at something the longest I can stay angry at it is a few days or weeks but it's been literally years and he's still crying about trannies every day
>How does schizo anon manage to have the gas pedal to the floor on his anger at trannies 24/7 holy shit
Schizophrenia
Mental illness is a hell of a drug. It isn’t something that just goes away one day and you become normal after that. This will go on for the rest of his life.
Sincere, profound, and crippling mental illness that used to result in involuntary incarceration. Bigger question is why the jannies don’t do a better job policing his shit
Let’s see how long this ban lasts before he evades again. Ten minutes? Every ip in his state will be banned pretty soon. I wonder if he appeals them?
these are what ARs should look like
honestly the one on the right is slick
did the other anon get his kac in?
You really couldn't tell he was trolling?
there's no reason to not believe that someone was getting in a kac, they are dropping more and more frequently.
will my 11.5 work at 143.7 meters?
yes.
no it turns into airsoft rounds basically unless its green tip (that stuff shoots through lv4 plates!)
i don't want my kac 11.5 anymore lol
>11.5
But what if you need to shoot past 100 yards?
you don't shoot. irrelevant question.
how much do I need to shoot before I "shoot"?
2000 rounds.
I've shot well over 2k rounds if you include 9mm
I don't. and you don't shoot. but you should.
you just need to do it more often and in more diverse settings than an indoor range
I can only go to an indoor range.
And after the ATF does it's thing, I won't be able to take it out at all. It's actually really depressing.
the atf is doing nothing
Be the change you want to see
If you're talking about me, Yes I did get my kac cqb in today. Was waiting to take a pic of it and post it till tomorrow with better lighting, cause all the lighting in my house is dogshit.
I don't like mine I want a 14
I know where you can get one if you're interested anon
I'm not settling, you must be talking about another anon, perhaps the guy that responded to my post. I like it a lot already, haven't shot it yet and it's nice and ergonomic, the bolt is sweet, and the charging handle is better than I expected it to be. I don't think I'm going to get a radian or geissele charging handle. I'll sell you my mk18 with geissele mk16 rail if you want.
I don't got no paper I'll have to sell my gay cqb for like 1.8 or pray someone wants to trade a 14.5 for mine
There are people on tacswap looking to trade 11.5 for 14.5, try there anon. Also don't sell for 1.8 if it isn't actually used. Sell for msrp maybe even slightly above msrp because it's hard to get right now. Just don't be a israelite about it. idk why you would buy a cqb if you didn't want one. that' doesn't make any sense.
It's only got marks from mounting, I got it when they were harder to get for a decent deal but then I realized I didn't like shorter barrels as much 14.5s
I've been prowling tacswap and I only really see people trying to sell their 11.5s and 14.5s for similar prices
There's a lot I've seen for 1.8-2.1 depending on bolt
what bolt do you have? Those people are selling for those prices probably because they don't have the new bolt and it's got rounds through it.
Phosphate, unfired, I got the CQB for the house because of these colored Black folk I've seen around causing trouble but since renovating a bit I feel like a 14.5 would serve fine for both rural use and in my home. So I don't really need the 11.5 anymore
Are you even in a rural area? 1.8 is about correct then. I'd offer maybe slightly less if I wanted it to sell fast. You're going to have to accept though you're in a bad place and time for this situation. The Kac's have just been updated and yours is used which already makes it less valuable. I'd just accept that I got something I'm not totally happy with, run the frick out of it and use it for another purpose. I seriously doubt you're going to need the extra 400-500fps. Quality 77 grain ammo will take you out pretty far.
I live North Carolina. Just think a 14.5 would serve me a little better. Don't need and 11.5 so I don't want to just spend an equal amount on a used KAC 14.5 and have this as a paper weight so I'll probably want to sell it. I got it brand new for 1.7 a bit ago so it wouldn't even be a loss to me I'm just seeing others go for the same price so I might have a hard time selling it unless I cut it down a bit so meh.
1.6*
I know how you feel a little bit, I just bought a MCX Tacops like 3 or 4 months ago and they just started releasing the new MCX today. Now I want to sell mine and get the new one. I didn't even get to shoot it, I still haven't even gotten my suppressor stamp from the atf yet and there's already a new MCX released... Christ.
>Omg they released the new iphone I need to upgrade!
It's actually some pretty substantial upgrades I care about. ambi controls, lighter by a pound, fully compatible with ar15 triggers. I also think they gassed it differently because in the garand thumb video he said it felt lighter, and the reason the ar15 triggers weren't working was supposed to be in part due to the violent cycling of the bolt chewing up the FCG parts.
Yeah it sucks. I'm tight on cash so I'm praying to God someone will want my upper for a decent price or trade me a 14.5. I don't even care about the updates really, I just want something that will never break and can do anything I'd need. I moved from inner town to the outskirts of it on an actual mountain so my needs have changed and I'm feeling some buyers remorse all things considered.
I know 11.5s can reach out too but I'm just feeling the 14.5 with the change in terrain and having a bigger home so I dunno. I'll never put 50K rounds through these for the upgrades to matter to me, if my current build was 14.5 I'd be happy because it's bomb proof and will be working long after Biden sends dog drones to our houses.
Yeah actually you just reminded me, there's a chance although I'm not expecting much, that we could get suppressors without stamps.
I don't care about these gay laws whatsoever but I just remembered even if that did happen I'd have to conduct a spell to get the brake off my KAC to be able to mount a suppressor on it because I'm never dropping 5k on a KAC can.
Even if cans never get un-NFA'd I'd still dislike the situation with the (albeit sexy) KAC FH. These things are like Rocksett'd on with 30 pounds of the shit or something so I hear.
kac cans are not 5k unless you're referring to gunbroker nonsense. Eventually they will become available for 1.5k there just isn't a lot of them being made right now.
> I'd have to conduct a spell to get the brake off my KAC to be able to mount a suppressor on it
kek, you just have to let it sit in water for a bit, boiling it is faster I hear. You can just take it to a kac gunsmith if you're nervous about doing it yourself. I'm thinking I'll be putting my surefire 300 sps on mine until I can get a kac can, god knows however long that will be.
I heard Rocksett can be a b***h to get off depending on the threads and how well they're covered both with rocksett and by the device itself but I don't know, I've never removed a factory muzzle device
Either way I'm never getting a can unless I make one or buy it from a buddy so I'd be better off with some other device. They are super sexy though. I love the ball bearing detents.
You think you're not going to buy a can now, like all people when they first began. But most end up getting a can after a while. I made my form 1 suppressor, it was my first. Now they changed it so you basically have to be a machinist to do a form 1.
I'll get a can, just not a form one.
You mean you're going to make one and not register it?
I'm gonna get out there and VOTE VOTE VOTE against hose Ultra MAGA Chuds after I get my Omicron booster to enter crowds safely!
I spent a month saving up for a sopmod stock.
I'd love to buy your mk18, but I need to start saving today. Please hold onto it for me, i should have the funds in about 12 years.
>what is a credit card
I think you're being a cuck anon, get a better job. I could afford to quality guns when I was just a food delivery guy. I worked 4 times a week, usually on the weekend, and in 1 week I'd make 800-1500 dollars. 1500 being my best week.
>my food delivery job with untaxed tips in america under the table while working 8hours like a homosexual delivering pizzas while smoking weed and hip hop music i made goood money
Yes I was untaxed, but I only worked for 4-5 hours a session. Also I was not smoking weed or listening to rap music. Don't insult me anon, I'm not a Black person.
I make exactly 920 dollars a week and am still flat broke every week
AMA
Cut costs and get a better job bro. you're doing something wrong.
I can't believe this guy is "settling" for a KAC 11.5, and I have to sit here with my fricking BCM, not even daring to imagine owning a stoner rifle because it's so far out of my reach.
If you don’t follow the build guide you are wrong and should repent for your sins
no
What if I just buy 1 gun and all the barrels to do the things
DM stop being a drama queen in the I like guns thread
you stop being a homosexual everywhere you go. eurogays need to frick off
Stop following me
Show bussy, twinkmeat.
Damn he made it to level 99 in only 80 rapes? They must have been exquisite.
80 convictions anon, considering he's a level 99 rape master, less than 1% of his total rapes end in a conviction.
Still impressive.
god i need a boyfriend with a good hairline
Sup
>Good hairline
Sorry that ain't me
well you definitely got a glowBlack person hairline
why do you have the "convicted for excessive force" haircut
Idk if I should get elcan or acog ta02
TA31
RM09
True
Yeah I was mainly considering ta02 due to the forward placement of the mounting plate for rmr, and I think being able to manually control brightness on an acog is pretty dang neat. Plus it gets really good battery life on a single AA, so that's also neat.
THE POWER OF THE SUN IN THE PALM OF MY HAND
As somebody who has both, I'll tell you there's a reason I have owned 3 acogs and I still have just 1 elcan. You really just can't beat the Acog/RMR combo for the money. Assuming they were the same price, still yet the Acog/RMR combo is super light. I've personally not used the LED Acogs, but I've heard the argument for the superior placement further up the optic for the RMR mount being superior to the TA31/TA01. I'm still partial to the TA31 and TA01. That being said, the Elcan is still a great optic, the problem is that it's just much more expensive and heavier for having the same type of clarity and FOV that the 4x32 Acog gives you.
I should also clarify, the placement of the RMR on the LEDcog is better primarily under nods as the thing isn't going to be smacked against your NODS, the RMR is so far back on a TA31 that it makes it kinda tricky sometimes to not hit it. If you don't have nods, I'd pass on the LED acog just for that reason alone.
Neither of them have a diopter
lol bro just focus ur eye manually stop being a homosexual
and they don't need one either. The absolute state of LPVOgays, holy shit.
Still in love with that setup there asiaticfoot. Is that a 16 incher?
nah man, that's a 14.5.
>you don’t ‘need’ a clear reticle
>astigmatism? just get laser eye surgery
>just get laser eye surgery
That can actually make lights worse.
Wearing glasses or contacts helps but I think Steiner will be the true successor to the ACOG from price point once the reticles are improved.