Alright?

Just a few provisos
>no Glonk
>no 1911
>preferably double stack or with factory extended mags
>DA/SA not necessary but is a plus
>conversions fine if proven reliable, no bubbajobs

  1. 2 weeks ago
    Yukari

    You began your new journey with a handicap which will ultimately lead to failure.

    • 2 weeks ago
      Anonymous

      Yeah well bro you gay

  2. 2 weeks ago
    Anonymous

    Make sure you shoot real 10mm and not FBI spec. If you're just gonna shoot FBI spec, fuck ya mudda.
    If you're gonna complain about cost, then you're gonna have to handload. Hot 10mm handloads are way cheaper to produce than buying the boutique rounds that'll be just as hot.
    Anyways, your only options are basically 1911's and Glock/other plasticshit guns. I've got a S&W M&P2.0 10mm and it's alright but jams on the second to last round every mag. S&W still hasn't addressed this as far as I'm aware but it's a common issue, only way to avoid it is to shoot pussyboy FBI spec. It probably needs a stiffer recoil spring and/or a stiffer mag spring. Sig P320 XTen has the exact same issue from what I've heard. Glock is probably your most reliable option (surprisingly).

    • 2 weeks ago
      Anonymous

      There isn't a single loading offered at original 10mm spec.
      Underwood and BB have 1 loading each that almost gets there, but still dont.

      • 2 weeks ago
        Yukari

        Wrong.

        • 2 weeks ago
          Anonymous

          The original 10mm was 180gr @1400 fps.
          Fucking show me something with that load, I'll wait, fucking chud.

          • 2 weeks ago
            Anonymous

            >The original 10mm was 180gr @1400 fps.
            Where are you getting that combination of numbers from? I couldn't find 180gr 1400FPS anywhere. A guy had a 30 y/o box of norma that was advertised as 165 @ 1400 though

          • 2 weeks ago
            Yukari

            Yeah buddy you're way off. It was 200 gr at 1200/180 @ 1300.

          • 2 weeks ago
            Anonymous

            >i'll wait

            >The original 10mm was 180gr @1400 fps.
            Where are you getting that combination of numbers from? I couldn't find 180gr 1400FPS anywhere. A guy had a 30 y/o box of norma that was advertised as 165 @ 1400 though

            Yeah buddy you're way off. It was 200 gr at 1200/180 @ 1300.

            >no reply
            guess he didn't wait

    • 2 weeks ago
      Anonymous

      The only semiauto that can reliably run 10mm is the glock.
      The 1911s beach themselves to death, the polymer sig, XD, and M&P all blow mags out/Crack slides/fail to run if you put anything hotter than 10mm range ammo that's basically expensive .40SW

      Were 10m(e)m(e) fanbois seriously just Glockolds this whole time?

      • 2 weeks ago
        Anonymous

        Maybe.
        Or it's because all other attempts at a semiauto 10mm has been garbage.

        • 2 weeks ago
          Anonymous

          10mm in a revolver is pointless though, so what's left?

          • 2 weeks ago
            Anonymous

            Glock.
            Or just use 9mm/.40/.45
            Shit any common defensive 10mm is only ~75-115 fps faster than defensive .40 in the same weight.

          • 2 weeks ago
            Anonymous

            The G20 fits your criteria perfectly. Why fight it?
            Alternatively, Springfield, Sig, and S&W all have striker fired 10's now to compete with the G20. Then there is the P220 which is a much nicer pistol but also a lot more expensive.

            That makes no sense. If 10mm is such a great round, capacity is largely irrelevant. Are you planning to make multiple bad shots on your target? Caliber selection is the least of your worries. My 9nly counter argument to the revolver is that a nice one is much more expensive than an auto and if I am going for a revolver anyway, I would step up to at least 44mag.

            They were blowing their magazines out and/or jamming if you put a anything hot in them

            Oh, bullshit.

      • 2 weeks ago
        Anonymous

        A lot of 10mm owners shoot their memecannon once or twice and then go on boards and proclaim 10mm is best mm. Even though they can't afford to shoot it, nor do they enjoy shooting it. It's tolerable, it's not enjoyable. Glocks are the only pistols that can run more than 5000rds of 10mm without a cracked slide, frame, or broken ejector.

        It hurts the feelings of people spending 1-3k on boutique custom 1911's, but someone needs to educate you noguns

        • 2 weeks ago
          Anonymous

          >Glocks are the only pistols that can run more than 5000rds of 10mm without a cracked slide, frame, or broken ejector.
          Okay, prove that they can do it and the other pistols you mentioned can’t. I’ll wait.

  3. 2 weeks ago
    Anonymous

    The only semiauto that can reliably run 10mm is the glock.
    The 1911s beach themselves to death, the polymer sig, XD, and M&P all blow mags out/Crack slides/fail to run if you put anything hotter than 10mm range ammo that's basically expensive .40SW

    • 2 weeks ago
      Anonymous

      Make sure you shoot real 10mm and not FBI spec. If you're just gonna shoot FBI spec, fuck ya mudda.
      If you're gonna complain about cost, then you're gonna have to handload. Hot 10mm handloads are way cheaper to produce than buying the boutique rounds that'll be just as hot.
      Anyways, your only options are basically 1911's and Glock/other plasticshit guns. I've got a S&W M&P2.0 10mm and it's alright but jams on the second to last round every mag. S&W still hasn't addressed this as far as I'm aware but it's a common issue, only way to avoid it is to shoot pussyboy FBI spec. It probably needs a stiffer recoil spring and/or a stiffer mag spring. Sig P320 XTen has the exact same issue from what I've heard. Glock is probably your most reliable option (surprisingly).

      does SIG not make the P220 in10mm anymore? I got one of the first ines made and it's never failed.
      I shoot 40 in it all the time too, even though "wah, it headspaces on the extractor!"

      • 2 weeks ago
        Anonymous

        They were blowing their magazines out and/or jamming if you put a anything hot in them

        • 2 weeks ago
          Anonymous

          nope, Ive shot plenty of buffalo bore through it too. not a singke malfunction

      • 2 weeks ago
        Anonymous

        I forgot about the P220 in 10mm, pretty sure they are still producing it. Other than that though I can't think of any DA/SA 10mms. There was a conversion for the CZ 97 but the 97 is kill.

        • 2 weeks ago
          Anonymous

          Do they make barrels or mags to convert a .45 Jericho?

        • 2 weeks ago
          Anonymous

          S&W 1006 if he wants a classic.
          For DA/SA guns that are in production, there's the P220, and also the Tanfoglio, but that's about it.

    • 2 weeks ago
      Anonymous

      Bruh shut the fuck up. The only 1911s that beat themselves to death in 10mm are old Delta Elites before Colt made significant changes to the frame. Maybe the shitty cast Armacor guns do too but nobody should buy those. I’d like to see one of the Glock shills do an endurance test between a G20 and a Dan Wesson Razorback.

  4. 2 weeks ago
    Anonymous

    sounds like you want tanfoglio

    • 2 weeks ago
      Anonymous

      Yeah or a Bren Ten but those are like 3k lmao
      The S&W 1006 series is neat but prone to mechanical failures apparently?

      • 2 weeks ago
        Anonymous

        The S&W 3rd gens are basically bombproof; the .45 equivalent to the 1006 will eat .45 Super forever with just a spring swap, and the 1006 itself was designed around full power 10mm (the reduced .40 tier loadings did not exist yet)

      • 2 weeks ago
        Anonymous

        >The S&W 1006 series is neat but prone to mechanical failures apparently?
        who the fuck said

  5. 2 weeks ago
    Anonymous

    Get yourself a Springfield XDM if you want a decent non-glock 10mm

    • 2 weeks ago
      Anonymous

      >jams
      >heh nothing personal, kiddo

      • 2 weeks ago
        Anonymous

        Literally never jammed after the first 50 rounds. Cope moron

        • 2 weeks ago
          Anonymous

          What did it do the first 50 rounds?

          • 2 weeks ago
            Anonymous

            Jammed twice. 2 out of thousands of round seems pretty acceptable to me.

            • 2 weeks ago
              Anonymous

              You haven't shit 1k of 10mm.
              Hell a 9mm XD can't even handle 1k rounds.

              • 2 weeks ago
                Anonymous

                You are actually retarded if you think that.

    • 2 weeks ago
      Anonymous

      Heard the slides crack, not fond of the trigger or grip safety, aside from le GRIPZONE maymay eks dee it seems like PrepHole hates them
      Are aftermarket triggers only for the Hellcat? I'd consider one since I don't really feel like spending 4k on a meme gun

  6. 2 weeks ago
    Anonymous

    Rock Island fs hc

  7. 2 weeks ago
    Anonymous

    How did 10mmeme fanboys become the angry chihuahuas of the magnum pistol world
    >im gonna load up the hottest botique ammo to get something a little better than 357 mag

    • 2 weeks ago
      Anonymous

      Lmao checked based heil'd
      You'd think an off the shelf USP loaded with .45 Super would satisfy their urge for a snowflake caliber with stoppinhawt pissinpowah but some people just can't let a meme die ig

  8. 2 weeks ago
    Anonymous

    Kriss Vector in 10mm. Defeat them all with the power of memes! Not a glock or 1911 just like you asked for!

  9. 2 weeks ago
    Anonymous

    M&P 2.0 10mm is the best choice on the market.

  10. 2 weeks ago
    Anonymous

    TANFOGLIO

    • 2 weeks ago
      Anonymous

      Unfortunately they stopped importing the witness hunter.
      I wish I had picked one up, I've always thought the name was absolutely incredible.

  11. 2 weeks ago
    Anonymous

    enjoy 10mm prices for 180gr JHP that goes 1065FPS

  12. 2 weeks ago
    Anonymous

    10mm tards are the vegans of guns

  13. 2 weeks ago
    Anonymous

    This puppy comes in around 650. I've finger fucked it in the gun store and its gooooood

  14. 2 weeks ago
    Anonymous

    >10mm
    >no Glonk
    >no 1911
    Okay, so you've disqualified almost all of the good options.

Your email address will not be published.